From: "Pim Zandbergen" <P.Zandbergen@macroscoop.nl>
To: "Justin T. Gibbs" <gibbs@scsiguy.com>,
"Cristian CONSTANTIN" <constantin@fokus.gmd.de>
Cc: <linux-kernel@vger.kernel.org>
Subject: Re: aic7xxx freezes with kernel 2.4.13 - solved
Date: Sun, 16 Dec 2001 21:57:16 +0100 [thread overview]
Message-ID: <NAEJLAMIFLGGOABFKHIDCEFHCAAA.P.Zandbergen@macroscoop.nl> (raw)
In-Reply-To: <200111262228.fAQMSrY52300@aslan.scsiguy.com>
Hi,
For the archives: my problem is solved. The problem went away after
removing a (crashed) IDE disk and the HPT370 IDE controller it was
connected to. I replaced the faulty IDE disk with a SCSI disk and
now all my IDE and SCSI problems are gone.
Thanks for your input,
Pim
> >On Wed, Nov 07, 2001 at 04:20:17PM +0100, Pim Zandbergen wrote:
> >> Hi,
> >>
> >> I've got a Dell PowerEdge 1300 with dual PIII's and dual aic7xxx
> >> controllers. One controller is onboard, the other is in a PCI slot.
> >>
> >> The system is running Red Hat 7.1 with kernel 2.4.13.
> >>
> >> Lately, this system is experiencing freezes that may last one or two
> >> minutes. These usually occur during heavy Samba activity. After the
> >> freeze, the system usually recovers, but by then, the Samba clients
> >> have timed out their operations.
> >>
> >> Syslog shows the freezes are related to the SCSI subsystem. I'm having
> >> trouble interpreting this information. Is my hardware suspect or could
> >> this be a driver bug?
> >>
> >> Syslog entries (with aic7xxx=verbose) showing the boot process and a
> >> system freeze can be found on
> >>
> >> http://www.macroscoop.nl/~pim/aic7xxx/syslog.html (98.080 bytes) or
> >> http://www.macroscoop.nl/~pim/aic7xxx/syslog.gz (6.410 bytes)
>
> In the case of these traces, it appears that the bus is not up to
> snuff for the negotiated speed. We're in data-out phase, our DMA
> engine is enabled, our FIFO is full of data to send, but the target
> has not requested any more data. This means that either the controller
> missed a REQ or the target missed an ACK. I would verify your cabling
> and termination.
prev parent reply other threads:[~2001-12-16 20:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-07 15:20 aic7xxx freezes with kernel 2.4.13 Pim Zandbergen
2001-11-22 11:10 ` Cristian CONSTANTIN
2001-11-26 22:28 ` Justin T. Gibbs
2001-12-16 20:57 ` Pim Zandbergen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=NAEJLAMIFLGGOABFKHIDCEFHCAAA.P.Zandbergen@macroscoop.nl \
--to=p.zandbergen@macroscoop.nl \
--cc=constantin@fokus.gmd.de \
--cc=gibbs@scsiguy.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®