From: "Paul Rolland" <rol@as2917.net>
To: "Paul Rolland" <rol@as2917.net>, <linux-kernel@vger.kernel.org>
Subject: RE: Ooops... probably IPv6 related, kernel 2.4.4
Date: Mon, 13 Aug 2001 16:35:30 +0200 [thread overview]
Message-ID: <NEBBIPOEBBGDFEJAJJBCEEKLEOAA.rol@as2917.net> (raw)
In-Reply-To: <NEBBIPOEBBGDFEJAJJBCIEKKEOAA.rol@as2917.net>
Some more details :
- make net/ipv6/addrconf.s gives me some code.
While trying to compare ksymoops result and this .s file, it seems that
the problem is probably located in inet6_rtm_deladdr
- This code (inet6_rtm_deladdr) is compiled if RTNETLINK is selected at
compile time, and it is on my machine as I need to configure IPv6
addresses
and I'm using the ip2 package to do that (hell, if someone finds how to
do
it with ifconfig, pls tell me :
donald /home/rol# ifconfig tap1 inet6 2001:1234:0:ff:1::2
Don't know how to set addresses for family 10.
Regards,
Paul
Paul Rolland, rol@as2917.net
--
Please no HTML, I'm not a browser - Pas d'HTML, je ne suis pas un navigateur
"Some people dreams of success... while others wake up and work hard at it"
> -----Original Message-----
> From: Paul Rolland [mailto:rol@as2917.net]
> Sent: Monday, August 13, 2001 4:20 PM
> To: linux-kernel@vger.kernel.org
> Cc: Paul Rolland (AS2917)
> Subject: Ooops... probably IPv6 related, kernel 2.4.4
>
>
> Hello,
>
> Let me follow the BUGS-REPORTING procedure :
>
> [1.] Ooops following the 5th or 6th IPv6 ping received thru a tap
> interface (using VTun).
> [2.] I'm using VTun to link two machines, thus having IPv4 and IPv6 set
> up on two boxes. I also have a two sit interfaces as the machine
> is also connected to an IPv6 network. I've activated IPv6 forwarding.
> From the second machine (not routing anything) at the end of the
> VTun/tap tunnel, I start a ping6 command either directly to the end
> of the tunnel or involving routing action.
> Following receipt of the 5th or 6th IPv6 packet, the machine crashes.
> When using only IPv4 traffic, no problem occurs.
> [3.] Networking - IPv6
> [4.] Linux version 2.4.4 (root@www-dev.witbe.net) (gcc version
> egcs-2.91.66
> 19990314/Linux (egcs-1.1.2 release)) #7 Fri Jul 13 13:35:54 GMT 2001
> [5.] Oops printing :
> Printing eip: c022e864
> *pde = 00000000
> Oops: 0000
> CPU: 0
> EIP: 0010:[<c022e864>]
> EFLAGS: 00010206
> eax: c14c5400 ebx: fffffffd ecx: 00000000 edx: ce3a5a1c
> esi: 00000000 edi: 00000000 ebp: ce3a5a1c esp: c02d9ea0
> ds: 0018 es: 0018 ss: 0018
> Process swapper (pid: 0 stackpage=c02d90000)
> Stack: c02345e7 00000000 fffffffd cf9e4384 00000000 cf9e4320 00000018
> 00000000
> c14c5400 c1453800 00000000 c01fcd30 c1453800 cf8cebc0 c0234b82
> ce3a5a1c
> cf9e4320 cf9e4384 cf9e4384 00000000 00018d52 cf9e4320 cf9e4320
> c01f5998
> Call Trace: [<c02345e7>] [<c01fcd30>] [<c0234b82>] [<c01f5958>]
> [<c01f5aa8>]
> [<c
> 011b9ec>] [<c010ac56>]
> [<c0118757>] [<c0118698>] [<c011859e>] [<c0107f38>]
> [<ef1342a0>]
> [<c
> 0106b88>] [<ef1342a0>] [<ef1342a0>]
> [<c01ebbcd>] [<c01eb98c>] [<c0105160>] [<c01051e4>]
> [<c0105000>]
> [<c
> 0100198>]
>
> Code: 8b 11 f6 c2 e0 74 15 89 d0 25 e0 00 00 00 3d e0 00 00 00 74
> Kernel panic: Aiee, killing interrupt handler!
> [6.]
> [7.1] sh scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux www-dev.witbe.net 2.4.4 #7 Fri Jul 13 13:35:54 GMT 2001 i686 unknown
>
> Gnu C egcs-2.91.66
> Gnu make 3.77
> binutils 2.9.1.0.24
> usage: fdformat [ -n ] device
> mount 2.9u
> modutils 2.4.6
> e2fsprogs 1.15
> pcmcia-cs 3.1.4
> PPP 2.3.10
> Linux C Library 2.1.2
> Dynamic linker (ldd) 2.1.2
> Procps 2.0.4
> Net-tools 1.58
> Console-tools 1999.03.02
> Sh-utils 2.0
> Modules Loaded
> [7.2] cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 8
> model name : Pentium III (Coppermine)
> stepping : 1
> cpu MHz : 598.147
> cache size : 256 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov pat pse36 mmx fxsr sse
> bogomips : 1192.75
> [7.3] cat /proc/modules
> # Nothing returned
> [7.4] cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 01f0-01f7 : ide0
> 02f8-02ff : serial(auto)
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> 08b0-08bf : PCI device 1166:0211 (ServerWorks)
> 0cf8-0cff : PCI conf1
> ccc0-ccff : Intel Corporation 82557 [Ethernet Pro 100]
> ccc0-ccff : eepro100
> d000-dfff : PCI Bus #02
> d800-d8ff : Adaptec 7899P
> dc00-dcff : PCI device 9005:00c5 (Adaptec)
> e800-e8ff : ATI Technologies Inc 3D Rage IIC
> ec80-ecff : PCI device 101e:9063 (American Megatrends Inc.)
>
> cat /proc/iomem
> 00000000-0009ffff : System RAM
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-0fffdfff : System RAM
> 00100000-002524f1 : Kernel code
> 002524f2-002d78a3 : Kernel data
> 0fffe000-0fffffff : reserved
> f0000000-f3ffffff : Dell Computer Corporation PowerEdge Expandable RAID
> Controller 3/Si
> f5000000-f5ffffff : PCI Bus #02
> f8000000-f9ffffff : PCI Bus #02
> f8ffe000-f8ffefff : Adaptec 7899P
> f8fff000-f8ffffff : PCI device 9005:00c5 (Adaptec)
> fa000000-fa0fffff : Intel Corporation 82557 [Ethernet Pro 100]
> fa100000-fa100fff : Intel Corporation 82557 [Ethernet Pro 100]
> fa100000-fa100fff : eepro100
> fc000000-fcffffff : ATI Technologies Inc 3D Rage IIC
> fe000000-fe000fff : PCI device 1166:0220 (ServerWorks)
> fe001000-fe001fff : ATI Technologies Inc 3D Rage IIC
> fe002000-fe002fff : PCI device 101e:9063 (American Megatrends Inc.)
> fec00000-fec0ffff : reserved
> fee00000-fee0ffff : reserved
> fff80000-ffffffff : reserved
> [7.5] lspci -vvv
> lspci -vvv
> 00:00.0 Host bridge: Pequr Technology: Unknown device 0009 (rev 05)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr+
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 48 set, cache line size 08
>
> 00:00.1 Host bridge: Pequr Technology: Unknown device 0009 (rev 05)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr+
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 48 set, cache line size 08
>
> 00:04.0 System peripheral: American Megatrends Inc.: Unknown device 9063
> (rev 04)
> Subsystem: Unknown device 101e:0767
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 set, cache line size 08
> Interrupt: pin A routed to IRQ 17
> BIST result: 00
> Region 0: I/O ports at ec80
> Region 1: Memory at fe002000 (32-bit, non-prefetchable)
>
> 00:0e.0 VGA compatible controller: ATI Technologies Inc: Unknown
> device 4759
> (rev 7a)
> Subsystem: Unknown device 1028:00a6
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop+ ParErr-
> Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 8 min, 32 set, cache line size 08
> Region 0: Memory at fc000000 (32-bit, prefetchable)
> Region 1: I/O ports at e800
> Region 2: Memory at fe001000 (32-bit, non-prefetchable)
> Capabilities: [5c] Power Management version 1
> Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0f.0 ISA bridge: Pequr Technology: Unknown device 0200 (rev 4f)
> Subsystem: Unknown device 1166:0200
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 set
>
> 00:0f.1 IDE interface: Pequr Technology: Unknown device 0211 (prog-if 8a)
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 set
> Region 4: I/O ports at 08b0
>
> 00:0f.2 USB Controller: Pequr Technology: Unknown device 0220 (rev 04)
> (prog-if 10)
> Subsystem: Unknown device 1166:0220
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 80 max, 32 set, cache line size 08
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at fe000000 (32-bit, non-prefetchable)
>
> 01:02.0 PCI bridge: Intel Corporation: Unknown device 0962 (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 set, cache line size 10
> Bus: primary=01, secondary=02, subordinate=02, sec-latency=32
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: f8000000-f9ffffff
> Prefetchable memory behind bridge: f5000000-f5ffffff
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 01:02.1 RAID bus controller: Dell Computer Corporation: Unknown
> device 0003
> (rev 01)
> Subsystem: Unknown device 1028:0003
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 set, cache line size 08
> Interrupt: pin A routed to IRQ 31
> Region 0: Memory at f0000000 (32-bit, prefetchable)
>
> 01:08.0 Ethernet controller: Intel Corporation 82557 (rev 08)
> Subsystem: Unknown device 1028:009b
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 8 min, 56 max, 32 set, cache line size 08
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fa100000 (32-bit, non-prefetchable)
> Region 1: I/O ports at ccc0
> Region 2: Memory at fa000000 (32-bit, non-prefetchable)
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 02:04.0 SCSI storage controller: Adaptec: Unknown device 00c5 (rev 01)
> Subsystem: Unknown device 1028:0003
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 40 min, 25 max, 32 set, cache line size 08
> Interrupt: pin A routed to IRQ 31
> BIST result: 00
> Region 0: I/O ports at dc00
> Region 1: Memory at f8fff000 (64-bit, non-prefetchable)
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:04.1 SCSI storage controller: Adaptec 7899P (rev 01)
> Subsystem: Unknown device 1028:00a6
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 40 min, 25 max, 32 set, cache line size 08
> Interrupt: pin B routed to IRQ 30
> BIST result: 00
> Region 0: I/O ports at d800
> Region 1: Memory at f8ffe000 (64-bit, non-prefetchable)
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> [7.6] cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: DELL Model: PERCRAID Mirror Rev: 0001
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
> Vendor: DELL Model: PERCRAID Mirror Rev: 0001
> Type: Direct-Access ANSI SCSI revision: 02
>
> [7.7]
> [X] ksymoops -v /usr/src/linux-2.4.4/vmlinux oops.file
> ksymoops 2.4.1 on i686 2.4.4. Options used
> -v /usr/src/linux-2.4.4/vmlinux (specified)
> -k /proc/ksyms (default)
> -l /proc/modules (default)
> -o /lib/modules/2.4.4/ (default)
> -m /boot/System.map (default)
>
> No modules in ksyms, skipping objects
> Warning (read_lsmod): no symbols in lsmod, is /proc/modules a valid lsmod
> file?
> Warning (compare_maps): ksyms_base symbol
> __VERSIONED_SYMBOL(shmem_file_setup) not found in vmlinux. Ignoring
> ksyms_base entry
> Warning (compare_maps): ksyms_base symbol ip_ct_attach_R__ver_ip_ct_attach
> not found in vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> netlink_attach_R__ver_netlink_attach not found in vmlinux. Ignoring
> ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> netlink_detach_R__ver_netlink_detach not found in vmlinux. Ignoring
> ksyms_base entry
> Warning (compare_maps): ksyms_base symbol netlink_post_R__ver_netlink_post
> not found in vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_getsockopt_R__ver_nf_getsockopt
> not found in vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol nf_hook_slow_R__ver_nf_hook_slow
> not found in vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_hooks_R__ver_nf_hooks not found
> in vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_register_hook_R__ver_nf_register_hook not found in vmlinux. Ignoring
> ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_register_queue_handler_R__ver_nf_register_queue_handler not found in
> vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_register_sockopt_R__ver_nf_register_sockopt not found in vmlinux.
> Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_reinject_R__ver_nf_reinject not
> found in vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_setsockopt_R__ver_nf_setsockopt
> not found in vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_unregister_hook_R__ver_nf_unregister_hook not found in
> vmlinux. Ignoring
> ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_unregister_queue_handler_R__ver_nf_unregister_queue_handler
> not found in
> vmlinux. Ignoring ksyms_base entry
> Warning (compare_maps): ksyms_base symbol
> nf_unregister_sockopt_R__ver_nf_unregister_sockopt not found in vmlinux.
> Ignoring ksyms_base entry
> *pde = 00000000
> Oops: 0000
> CPU: 0
> EIP: 0010:[<c022e864>]
> Using defaults from ksymoops -t elf32-i386 -a i386
> EFLAGS: 00010206
> eax: c14c5400 ebx: fffffffd ecx: 00000000 edx: ce3a5a1c
> esi: 00000000 edi: 00000000 ebp: ce3a5a1c esp: c02d9ea0
> ds: 0018 es: 0018 ss: 0018
> Process swapper (pid: 0 stackpage=c02d90000)
> Stack: c02345e7 00000000 fffffffd cf9e4384 00000000 cf9e4320 00000018
> 00000000
> c14c5400 c1453800 00000000 c01fcd30 c1453800 cf8cebc0 c0234b82
> ce3a5a1c
> cf9e4320 cf9e4384 cf9e4384 00000000 00018d52 cf9e4320 cf9e4320
> c01f5998
> Call Trace: [<c02345e7>] [<c01fcd30>] [<c0234b82>] [<c01f5958>]
> [<c01f5aa8>]
> [<c011b9ec>] [<c010ac56>]
> [<c0118757>] [<c0118698>] [<c011859e>] [<c0107f38>]
> [<ef1342a0>]
> [<c0106b88>] [<ef1342a0>] [<ef1342a0>]
> [<c01ebbcd>] [<c01eb98c>] [<c0105160>] [<c01051e4>]
> [<c0105000>]
> [<c0100198>]
> Code: 8b 11 f6 c2 e0 74 15 89 d0 25 e0 00 00 00 3d e0 00 00 00 74
>
> >>EIP; c022e864 <addrconf_verify+54/c0> <=====
> Trace; c02345e7 <ndisc_send_ns+37/260>
> Trace; c01fcd30 <ip_local_deliver_finish+0/178>
> Trace; c0234b82 <ndisc_solicit+e2/f0>
> Trace; c01f5958 <neigh_timer_handler+0/170>
> Trace; c01f5aa8 <neigh_timer_handler+150/170>
> Trace; c011b9ec <timer_bh+21c/258>
> Trace; c010ac56 <timer_interrupt+86/104>
> Trace; c0118757 <bh_action+1b/68>
> Trace; c0118698 <tasklet_hi_action+3c/60>
> Trace; c011859e <do_softirq+4e/74>
> Trace; c0107f38 <do_IRQ+9c/ac>
> Trace; ef1342a0 <END_OF_CODE+2ededdb0/????>
> Trace; c0106b88 <ret_from_intr+0/20>
> Trace; ef1342a0 <END_OF_CODE+2ededdb0/????>
> Trace; ef1342a0 <END_OF_CODE+2ededdb0/????>
> Trace; c01ebbcd <acpi_idle+241/26c>
> Trace; c01eb98c <acpi_idle+0/26c>
> Trace; c0105160 <default_idle+0/28>
> Trace; c01051e4 <cpu_idle+3c/50>
> Trace; c0105000 <init+0/150>
> Trace; c0100198 <L6+0/2>
> Code; c022e864 <addrconf_verify+54/c0>
> 00000000 <_EIP>:
> Code; c022e864 <addrconf_verify+54/c0> <=====
> 0: 8b 11 movl (%ecx),%edx <=====
> Code; c022e866 <addrconf_verify+56/c0>
> 2: f6 c2 e0 testb $0xe0,%dl
> Code; c022e869 <addrconf_verify+59/c0>
> 5: 74 15 je 1c <_EIP+0x1c> c022e880
> <addrconf_verify+70/c0>
> Code; c022e86b <addrconf_verify+5b/c0>
> 7: 89 d0 movl %edx,%eax
> Code; c022e86d <addrconf_verify+5d/c0>
> 9: 25 e0 00 00 00 andl $0xe0,%eax
> Code; c022e872 <addrconf_verify+62/c0>
> e: 3d e0 00 00 00 cmpl $0xe0,%eax
> Code; c022e877 <addrconf_verify+67/c0>
> 13: 74 00 je 15 <_EIP+0x15> c022e879
> <addrconf_verify+69/c0>
>
> Kernel panic: Aiee, killing interrupt handler!
>
> 17 warnings issued. Results may not be reliable.
>
> Paul Rolland, rol@as2917.net
>
> --
>
> Please no HTML, I'm not a browser - Pas d'HTML, je ne suis pas un
> navigateur
>
> "Some people dreams of success... while others wake up and work
> hard at it"
>
>
>
next prev parent reply other threads:[~2001-08-13 14:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-13 14:19 Paul Rolland
2001-08-13 14:35 ` Paul Rolland [this message]
2001-08-13 14:40 ` David S. Miller
2001-08-13 14:45 ` Paul Rolland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=NEBBIPOEBBGDFEJAJJBCEEKLEOAA.rol@as2917.net \
--to=rol@as2917.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®