From: david.knierim@tekelec.com
To: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: alexander@netintact.se, Donald Becker <becker@scyld.com>,
Greg KH <greg@kroah.com>, jamal <hadi@cyberus.ca>,
Jeff Garzik <jgarzik@pobox.com>,
kuznet@ms2.inr.ac.ru, linux-kernel@vger.kernel.org,
raarts@office.netland.nl,
Robert Olsson <Robert.Olsson@data.slu.se>,
Linus Torvalds <torvalds@transmeta.com>
Subject: Re: PCI init issues
Date: Tue, 4 Mar 2003 11:26:51 -0500 [thread overview]
Message-ID: <OFDDD85BEC.1AD47C42-ON85256CDF.0059DE8B@nc.tekelec.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1898 bytes --]
Ivan,
Here is the full messages output for a system with this problem. I had
only provided part of the
messages file to him earlier. This is the entire output.
(See attached file: messages)
David
Ivan Kokshaysky
<ink@jurassic.pa To: jamal
<hadi@cyberus.ca>
rk.msu.ru> cc: Greg KH
<greg@kroah.com>, Linus Torvalds
<torvalds@transmeta.com>, Jeff Garzik
<jgarzik@pobox.com>,
kuznet@ms2.inr.ac.ru, david.knierim@tekelec.com,
Robert Olsson
03/04/2003 10:28 <Robert.Olsson@data.slu.se>,
Donald Becker <becker@scyld.com>,
AM
linux-kernel@vger.kernel.org, alexander@netintact.se,
raarts@office.netland.nl
Subject: Re: PCI init issues
On Mon, Mar 03, 2003 at 08:48:16PM -0500, jamal wrote:
> Mar 3 18:01:39 localhost kernel: PCI->APIC IRQ transform: (B6,I4,P0) ->
> 96
> Mar 3 18:01:39 localhost kernel: PCI->APIC IRQ transform: (B6,I5,P1) ->
> 96
> Mar 3 18:01:39 localhost kernel: PCI->APIC IRQ transform: (B6,I6,P2) ->
> 96
> Mar 3 18:01:39 localhost kernel: PCI->APIC IRQ transform: (B6,I7,P3) ->
> 96
...
> BIOS irq assignments i suppose are validated.
No, this means that mp tables are broken in a way I didn't expect...
Also, it's unclear whether or not the IOxAPIC routing is broken as well.
Probably full dmesg output (especially things related to IO_APICs setup
and irq<->pin mapping) could shed some light on this.
> I have a feeling the reason it works in windows is because of a
> functional ACPI.
Perhaps.
Ivan.
(See attached file: messages)
[-- Attachment #2: messages --]
[-- Type: application/octet-stream, Size: 48018 bytes --]
Mar 4 11:25:26 localhost exiting on signal 15
Mar 4 11:27:44 localhost syslogd 1.4.1: restart.
Mar 4 11:27:44 localhost syslog: syslogd startup succeeded
Mar 4 11:27:44 localhost syslog: klogd startup succeeded
Mar 4 11:27:44 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 4 11:27:44 localhost kernel: redirection entries: 0017
Mar 4 11:27:44 localhost kernel:
Mar 4 11:27:44 localhost last message repeated 3 times
Mar 4 11:27:44 localhost kernel: .................................... done.
Mar 4 11:27:44 localhost kernel: Using local APIC timer interrupts.
Mar 4 11:27:44 localhost kernel: calibrating APIC timer ...
Mar 4 11:27:44 localhost kernel: ..... CPU clock speed is 1996.0664 MHz.
Mar 4 11:27:44 localhost kernel: ..... host bus clock speed is 99.1595 MHz.
Mar 4 11:27:44 localhost kernel: cpu: 0, clocks: 194942, slice: 38988
Mar 4 11:27:44 localhost kernel: CPU0<T0:194928,T1:155936,D:4,S:38988,C:194942>
Mar 4 11:27:44 localhost kernel: cpu: 1, clocks: 194942, slice: 38988
Mar 4 11:27:44 localhost kernel: cpu: 3, clocks: 194942, slice: 38988
Mar 4 11:27:44 localhost kernel: cpu: 2, clocks: 194942, slice: 38988
Mar 4 11:27:44 localhost kernel: CPU2<T0:194928,T1:77952,D:12,S:38988,C:194942>
Mar 4 11:27:44 localhost kernel: CPU3<T0:194928,T1:38976,D:0,S:38988,C:194942>
Mar 4 11:27:44 localhost kernel: CPU1<T0:194928,T1:116944,D:8,S:38988,C:194942>
Mar 4 11:27:44 localhost kernel: checking TSC synchronization across CPUs: passed.
Mar 4 11:27:44 localhost kernel: migration_task 0 on cpu=0
Mar 4 11:27:44 localhost kernel: migration_task 2 on cpu=2
Mar 4 11:27:44 localhost kernel: migration_task 3 on cpu=3
Mar 4 11:27:44 localhost kernel: migration_task 1 on cpu=1
Mar 4 11:27:44 localhost kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Mar 4 11:27:44 localhost kernel: mtrr: probably your BIOS does not setup all CPUs
Mar 4 11:27:44 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=8
Mar 4 11:27:44 localhost kernel: PCI: Using configuration type 1
Mar 4 11:27:44 localhost kernel: PCI: Probing PCI hardware
Mar 4 11:27:44 localhost kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
Mar 4 11:27:44 localhost kernel: PCI: Discovered primary peer bus 10 [IRQ]
Mar 4 11:27:44 localhost kernel: PCI: Discovered primary peer bus 11 [IRQ]
Mar 4 11:27:44 localhost kernel: PCI: Discovered primary peer bus 12 [IRQ]
Mar 4 11:27:44 localhost kernel: PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0
Mar 4 11:27:44 localhost kernel: PCI: IRQ fixup
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B2,I1,P1) -> 48
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B3,I1,P1) -> 24
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B3,I1,P2) -> 25
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B6,I4,P0) -> 96
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B6,I5,P1) -> 96
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B6,I6,P2) -> 96
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B6,I7,P3) -> 96
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B8,I1,P1) -> 16
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B8,I2,P2) -> 17
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B8,I3,P3) -> 18
Mar 4 11:27:44 localhost kernel: isapnp: Scanning for PnP cards...
Mar 4 11:27:44 localhost kernel: isapnp: No Plug & Play device found
Mar 4 11:27:44 localhost kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Mar 4 11:27:44 localhost kernel: Linux NET4.0 for Linux 2.4
Mar 4 11:27:44 localhost kernel: Based upon Swansea University Computer Society NET3.039
Mar 4 11:27:44 localhost kernel: Initializing RT netlink socket
Mar 4 11:27:44 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Mar 4 11:27:44 localhost kernel: apm: disabled - APM is not SMP safe.
Mar 4 11:27:44 localhost kernel: Starting kswapd
Mar 4 11:27:44 localhost kernel: allocated 256 pages and 256 bhs reserved for the highmem bounces
Mar 4 11:27:44 localhost kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Mar 4 11:27:44 localhost kernel: Detected PS/2 Mouse Port.
Mar 4 11:27:44 localhost kernel: pty: 2048 Unix98 ptys configured
Mar 4 11:27:44 localhost kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Mar 4 11:27:44 localhost kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Mar 4 11:27:44 localhost kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Mar 4 11:27:44 localhost kernel: Real Time Clock Driver v1.10e
Mar 4 11:27:44 localhost kernel: block: 1024 slots per queue, batch=256
Mar 4 11:27:44 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Mar 4 11:27:44 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 4 11:27:44 localhost kernel: PIIX4: IDE controller on PCI bus 00 dev f9
Mar 4 11:27:44 localhost kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007)
Mar 4 11:27:44 localhost kernel: PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table.
Mar 4 11:27:44 localhost kernel: PIIX4: chipset revision 2
Mar 4 11:27:44 localhost kernel: PIIX4: not 100%% native mode: will probe irqs later
Mar 4 11:27:44 localhost kernel: ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio
Mar 4 11:27:44 localhost kernel: ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio
Mar 4 11:27:44 localhost kernel: hda: WDC WD1200BB-00CAA1, ATA DISK drive
Mar 4 11:27:44 localhost kernel: hdc: WDC WD1200BB-00CAA1, ATA DISK drive
Mar 4 11:27:44 localhost kernel: hdd: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
Mar 4 11:27:44 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 4 11:27:44 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 4 11:27:44 localhost kernel: blk: queue c041fda4, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: blk: queue c041fda4, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
Mar 4 11:27:44 localhost kernel: blk: queue c0420104, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: blk: queue c0420104, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100)
Mar 4 11:27:44 localhost kernel: ide-floppy driver 0.99.newide
Mar 4 11:27:44 localhost kernel: Partition check:
Mar 4 11:27:44 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
Mar 4 11:27:44 localhost kernel: hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 >
Mar 4 11:27:44 localhost kernel: FDC 0 is a post-1991 82077
Mar 4 11:27:44 localhost kernel: NET4: Frame Diverter 0.46
Mar 4 11:27:44 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Mar 4 11:27:44 localhost kernel: ide-floppy driver 0.99.newide
Mar 4 11:27:44 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar 4 11:27:44 localhost kernel: md: Autodetecting RAID arrays.
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost kernel: [events: 00000026]
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost last message repeated 7 times
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.1): succeeded
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost kernel: [events: 00000026]
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost last message repeated 6 times
Mar 4 11:27:44 localhost kernel: md: autorun ...
Mar 4 11:27:44 localhost kernel: md: considering hdc11 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc11 ...
Mar 4 11:27:44 localhost kernel: md: adding hda11 ...
Mar 4 11:27:44 localhost kernel: md: created md11
Mar 4 11:27:44 localhost kernel: md: bind<hda11,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc11,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc11><hda11>
Mar 4 11:27:44 localhost kernel: md: hdc11's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda11's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md11 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc11,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc11)
Mar 4 11:27:44 localhost kernel: md: unbind<hda11,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda11)
Mar 4 11:27:44 localhost kernel: md: considering hdc10 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc10 ...
Mar 4 11:27:44 localhost kernel: md: adding hda10 ...
Mar 4 11:27:44 localhost kernel: md: created md10
Mar 4 11:27:44 localhost kernel: md: bind<hda10,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc10,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc10><hda10>
Mar 4 11:27:44 localhost kernel: md: hdc10's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda10's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md10 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc10,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc10)
Mar 4 11:27:44 localhost kernel: md: unbind<hda10,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda10)
Mar 4 11:27:44 localhost kernel: md: considering hdc9 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc9 ...
Mar 4 11:27:44 localhost kernel: md: adding hda9 ...
Mar 4 11:27:44 localhost kernel: md: created md9
Mar 4 11:27:44 localhost kernel: md: bind<hda9,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc9,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc9><hda9>
Mar 4 11:27:44 localhost kernel: md: hdc9's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda9's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.2): succeeded
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md9 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc9,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc9)
Mar 4 11:27:44 localhost kernel: md: unbind<hda9,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda9)
Mar 4 11:27:44 localhost kernel: md: considering hdc8 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc8 ...
Mar 4 11:27:44 localhost kernel: md: adding hda8 ...
Mar 4 11:27:44 localhost kernel: md: created md8
Mar 4 11:27:44 localhost kernel: md: bind<hda8,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc8,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc8><hda8>
Mar 4 11:27:44 localhost kernel: md: hdc8's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda8's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md8 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc8,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc8)
Mar 4 11:27:44 localhost kernel: md: unbind<hda8,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda8)
Mar 4 11:27:44 localhost kernel: md: considering hdc7 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc7 ...
Mar 4 11:27:44 localhost kernel: md: adding hda7 ...
Mar 4 11:27:44 localhost kernel: md: created md7
Mar 4 11:27:44 localhost kernel: md: bind<hda7,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc7,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc7><hda7>
Mar 4 11:27:44 localhost kernel: md: hdc7's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda7's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md7 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc7,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc7)
Mar 4 11:27:44 localhost kernel: md: unbind<hda7,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda7)
Mar 4 11:27:44 localhost kernel: md: considering hdc6 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc6 ...
Mar 4 11:27:44 localhost kernel: md: adding hda6 ...
Mar 4 11:27:44 localhost kernel: md: created md6
Mar 4 11:27:44 localhost kernel: md: bind<hda6,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc6,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc6><hda6>
Mar 4 11:27:44 localhost kernel: md: hdc6's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda6's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md6 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc6,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc6)
Mar 4 11:27:44 localhost kernel: md: unbind<hda6,0>
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.3): succeeded
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda6)
Mar 4 11:27:44 localhost kernel: md: considering hdc5 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc5 ...
Mar 4 11:27:44 localhost kernel: md: adding hda5 ...
Mar 4 11:27:44 localhost kernel: md: created md5
Mar 4 11:27:44 localhost kernel: md: bind<hda5,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc5,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc5><hda5>
Mar 4 11:27:44 localhost kernel: md: hdc5's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda5's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md5 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc5,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc5)
Mar 4 11:27:44 localhost kernel: md: unbind<hda5,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda5)
Mar 4 11:27:44 localhost kernel: md: considering hdc3 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc3 ...
Mar 4 11:27:44 localhost kernel: md: adding hda3 ...
Mar 4 11:27:44 localhost kernel: md: created md3
Mar 4 11:27:44 localhost kernel: md: bind<hda3,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc3,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc3><hda3>
Mar 4 11:27:44 localhost kernel: md: hdc3's event counter: 00000026
Mar 4 11:27:44 localhost kernel: md: hda3's event counter: 00000026
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md3 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc3,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc3)
Mar 4 11:27:44 localhost kernel: md: unbind<hda3,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda3)
Mar 4 11:27:44 localhost kernel: md: considering hdc2 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc2 ...
Mar 4 11:27:44 localhost kernel: md: adding hda2 ...
Mar 4 11:27:44 localhost kernel: md: created md2
Mar 4 11:27:44 localhost kernel: md: bind<hda2,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc2,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc2><hda2>
Mar 4 11:27:44 localhost kernel: md: hdc2's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda2's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md2 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc2,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc2)
Mar 4 11:27:44 localhost kernel: md: unbind<hda2,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda2)
Mar 4 11:27:44 localhost kernel: md: considering hdc1 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc1 ...
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.4): succeeded
Mar 4 11:27:44 localhost kernel: md: adding hda1 ...
Mar 4 11:27:44 localhost kernel: md: created md1
Mar 4 11:27:44 localhost kernel: md: bind<hda1,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc1,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc1><hda1>
Mar 4 11:27:44 localhost kernel: md: hdc1's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda1's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md1 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc1,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc1)
Mar 4 11:27:44 localhost kernel: md: unbind<hda1,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda1)
Mar 4 11:27:44 localhost kernel: md: ... autorun DONE.
Mar 4 11:27:44 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4
Mar 4 11:27:44 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 4 11:27:44 localhost kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Mar 4 11:27:44 localhost kernel: IP: routing cache hash table of 16384 buckets, 128Kbytes
Mar 4 11:27:44 localhost kernel: TCP: Hash tables configured (established 262144 bind 65536)
Mar 4 11:27:44 localhost kernel: Linux IP multicast router 0.06 plus PIM-SM
Mar 4 11:27:44 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 4 11:27:44 localhost kernel: RAMDISK: Compressed image found at block 0
Mar 4 11:27:44 localhost kernel: Freeing initrd memory: 133k freed
Mar 4 11:27:44 localhost kernel: VFS: Mounted root (ext2 filesystem).
Mar 4 11:27:44 localhost kernel: md: raid1 personality registered as nr 3
Mar 4 11:27:44 localhost kernel: Journalled Block Device driver loaded
Mar 4 11:27:44 localhost kernel: md: Autodetecting RAID arrays.
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost last message repeated 13 times
Mar 4 11:27:44 localhost kernel: [events: 00000026]
Mar 4 11:27:44 localhost kernel: [events: 00000026]
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost last message repeated 3 times
Mar 4 11:27:44 localhost kernel: md: autorun ...
Mar 4 11:27:44 localhost kernel: md: considering hda1 ...
Mar 4 11:27:44 localhost kernel: md: adding hda1 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc1 ...
Mar 4 11:27:44 localhost kernel: md: created md1
Mar 4 11:27:44 localhost kernel: md: bind<hdc1,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda1,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda1><hdc1>
Mar 4 11:27:44 localhost kernel: md: hda1's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc1's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md1: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md1: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda1 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc1 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.5): succeeded
Mar 4 11:27:44 localhost kernel: md: updating md1 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda1 [events: 00000029]<6>(write) hda1's sb offset: 272960
Mar 4 11:27:44 localhost kernel: md: hdc1 [events: 00000029]<6>(write) hdc1's sb offset: 262976
Mar 4 11:27:44 localhost kernel: md: considering hda2 ...
Mar 4 11:27:44 localhost kernel: md: adding hda2 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc2 ...
Mar 4 11:27:44 localhost kernel: md: created md2
Mar 4 11:27:44 localhost kernel: md: bind<hdc2,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda2,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda2><hdc2>
Mar 4 11:27:44 localhost kernel: md: hda2's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc2's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md2: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md2: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda2 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc2 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md2 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md2 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda2 [events: 00000029]<6>(write) hda2's sb offset: 538112
Mar 4 11:27:44 localhost kernel: md: hdc2 [events: 00000029]<6>(write) hdc2's sb offset: 525056
Mar 4 11:27:44 localhost kernel: md: considering hda3 ...
Mar 4 11:27:44 localhost kernel: md: adding hda3 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc3 ...
Mar 4 11:27:44 localhost kernel: md: created md3
Mar 4 11:27:44 localhost kernel: md: bind<hdc3,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda3,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda3><hdc3>
Mar 4 11:27:44 localhost kernel: md: hda3's event counter: 00000026
Mar 4 11:27:44 localhost kernel: md: hdc3's event counter: 00000026
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md3: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md3: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda3 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc3 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md3 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md3 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda3 [events: 00000027]<6>(write) hda3's sb offset: 2056256
Mar 4 11:27:44 localhost kernel: md: hdc3 [events: 00000027]<6>(write) hdc3's sb offset: 2048640
Mar 4 11:27:44 localhost kernel: md: considering hda5 ...
Mar 4 11:27:44 localhost kernel: md: adding hda5 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc5 ...
Mar 4 11:27:44 localhost kernel: md: created md5
Mar 4 11:27:44 localhost kernel: md: bind<hdc5,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda5,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda5><hdc5>
Mar 4 11:27:44 localhost kernel: md: hda5's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc5's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md5: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md5: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda5 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc5 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md5 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md5 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda5 [events: 00000029]<6>(write) hda5's sb offset: 4208896
Mar 4 11:27:44 localhost kernel: md: hdc5 [events: 00000029]<6>(write) hdc5's sb offset: 4195200
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.6): succeeded
Mar 4 11:27:44 localhost kernel: md: considering hda6 ...
Mar 4 11:27:44 localhost kernel: md: adding hda6 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc6 ...
Mar 4 11:27:44 localhost kernel: md: created md6
Mar 4 11:27:44 localhost kernel: md: bind<hdc6,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda6,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda6><hdc6>
Mar 4 11:27:44 localhost kernel: md: hda6's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc6's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md6: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md6: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda6 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc6 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md6 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md6 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda6 [events: 00000029]<6>(write) hda6's sb offset: 1060160
Mar 4 11:27:44 localhost kernel: md: hdc6 [events: 00000029]<6>(write) hdc6's sb offset: 1049216
Mar 4 11:27:44 localhost kernel: md: considering hda7 ...
Mar 4 11:27:44 localhost kernel: md: adding hda7 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc7 ...
Mar 4 11:27:44 localhost kernel: md: created md7
Mar 4 11:27:44 localhost kernel: md: bind<hdc7,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda7,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda7><hdc7>
Mar 4 11:27:44 localhost kernel: md: hda7's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc7's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md7: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md7: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda7 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc7 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md7 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md7 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda7 [events: 00000029]<6>(write) hda7's sb offset: 538048
Mar 4 11:27:44 localhost kernel: md: hdc7 [events: 00000029]<6>(write) hdc7's sb offset: 525056
Mar 4 11:27:44 localhost kernel: md: considering hda8 ...
Mar 4 11:27:44 localhost kernel: md: adding hda8 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc8 ...
Mar 4 11:27:44 localhost kernel: md: created md8
Mar 4 11:27:44 localhost kernel: md: bind<hdc8,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda8,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda8><hdc8>
Mar 4 11:27:44 localhost kernel: md: hda8's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc8's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md8: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md8: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.7): succeeded
Mar 4 11:27:44 localhost kernel: raid1: device hda8 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc8 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md8 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md8 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda8 [events: 00000029]<6>(write) hda8's sb offset: 4208896
Mar 4 11:27:44 localhost kernel: md: hdc8 [events: 00000029]<6>(write) hdc8's sb offset: 4195200
Mar 4 11:27:44 localhost kernel: md: considering hda9 ...
Mar 4 11:27:44 localhost kernel: md: adding hda9 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc9 ...
Mar 4 11:27:44 localhost kernel: md: created md9
Mar 4 11:27:44 localhost kernel: md: bind<hdc9,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda9,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda9><hdc9>
Mar 4 11:27:44 localhost kernel: md: hda9's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc9's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md9: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md9: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda9 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc9 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md9 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md9 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda9 [events: 00000029]<6>(write) hda9's sb offset: 538048
Mar 4 11:27:44 localhost kernel: md: hdc9 [events: 00000029]<6>(write) hdc9's sb offset: 525056
Mar 4 11:27:44 localhost kernel: md: considering hda10 ...
Mar 4 11:27:44 localhost kernel: md: adding hda10 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc10 ...
Mar 4 11:27:44 localhost kernel: md: created md10
Mar 4 11:27:44 localhost kernel: md: bind<hdc10,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda10,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda10><hdc10>
Mar 4 11:27:44 localhost kernel: md: hda10's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc10's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md10: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md10: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda10 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc10 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md10 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md10 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda10 [events: 00000029]<6>(write) hda10's sb offset: 4208896
Mar 4 11:27:44 localhost kernel: md: hdc10 [events: 00000029]<6>(write) hdc10's sb offset: 4195200
Mar 4 11:27:44 localhost kernel: md: considering hda11 ...
Mar 4 11:27:44 localhost kernel: md: adding hda11 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc11 ...
Mar 4 11:27:44 localhost kernel: md: created md11
Mar 4 11:27:44 localhost kernel: md: bind<hdc11,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda11,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda11><hdc11>
Mar 4 11:27:44 localhost kernel: md: hda11's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc11's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md11: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md11: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda11 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc11 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md11 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md11 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda11 [events: 00000029]<6>(write) hda11's sb offset: 15880128
Mar 4 11:27:44 localhost kernel: md: hdc11 [events: 00000029]<6>(write) hdc11's sb offset: 15872832
Mar 4 11:27:44 localhost kernel: md: ... autorun DONE.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: Freeing unused kernel memory: 188k freed
Mar 4 11:27:44 localhost kernel: Adding Swap: 2048632k swap-space (priority 1000)
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,2), internal journal
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,1), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,6), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,5), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,7), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,8), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,9), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,10), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,11), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: SCSI subsystem driver Revision: 1.00
Mar 4 11:27:44 localhost kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Mar 4 11:27:44 localhost kernel: Vendor: SONY Model: CD-RW CRX210E1 Rev: 2YS1
Mar 4 11:27:44 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Mar 4 11:27:44 localhost kernel: hdd: DMA disabled
Mar 4 11:27:44 localhost kernel: blk: queue c041fda4, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: blk: queue c0420104, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost keytable: Loading system font: succeeded
Mar 4 11:27:44 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Mar 4 11:27:44 localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Mar 4 11:27:44 localhost kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:24:FC:80, IRQ 17.
Mar 4 11:27:45 localhost kernel: Board assembly 000000-000, Physical connectors present: RJ45
Mar 4 11:27:45 localhost kernel: Primary interface chip i82555 PHY #1.
Mar 4 11:27:45 localhost kernel: General self-test: passed.
Mar 4 11:27:45 localhost kernel: Serial sub-system self-test: passed.
Mar 4 11:27:45 localhost kernel: Internal registers self-test: passed.
Mar 4 11:27:45 localhost kernel: ROM checksum self-test: passed (0xb874c1d3).
Mar 4 11:27:45 localhost kernel: eth1: OEM i82557/i82558 10/100 Ethernet, 00:30:48:24:FC:81, IRQ 18.
Mar 4 11:27:45 localhost kernel: Board assembly 000000-000, Physical connectors present: RJ45
Mar 4 11:27:45 localhost kernel: Primary interface chip i82555 PHY #1.
Mar 4 11:27:45 localhost kernel: General self-test: passed.
Mar 4 11:27:45 localhost kernel: Serial sub-system self-test: passed.
Mar 4 11:27:45 localhost kernel: Internal registers self-test: passed.
Mar 4 11:27:45 localhost kernel: ROM checksum self-test: passed (0xb874c1d3).
Mar 4 11:27:45 localhost kernel: Intel(R) PRO/1000 Network Driver - version 4.4.19-k2
Mar 4 11:27:45 localhost kernel: Copyright (c) 1999-2002 Intel Corporation.
Mar 4 11:27:45 localhost kernel: eth2: Intel(R) PRO/1000 Network Connection
Mar 4 11:27:45 localhost kernel: eth3: Intel(R) PRO/1000 Network Connection
Mar 4 11:27:45 localhost kernel: eth4: Intel(R) PRO/1000 Network Connection
Mar 4 11:27:45 localhost kernel: e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex
Mar 4 11:27:45 localhost kernel: e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex
Mar 4 11:27:45 localhost kernel: e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex
Mar 4 11:27:45 localhost kernel: Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
Mar 4 11:27:45 localhost kernel: tulip0: EEPROM default media type Autosense.
Mar 4 11:27:45 localhost kernel: tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: eth5: Digital DS21143 Tulip rev 65 at 0xf89f9000, 00:C0:95:C8:0E:80, IRQ 96.
Mar 4 11:27:45 localhost kernel: tulip1: EEPROM default media type Autosense.
Mar 4 11:27:45 localhost kernel: tulip1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: tulip1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: eth6: Digital DS21143 Tulip rev 65 at 0xf89fb400, 00:C0:95:C8:0E:81, IRQ 96.
Mar 4 11:27:45 localhost kernel: tulip2: EEPROM default media type Autosense.
Mar 4 11:27:45 localhost kernel: tulip2: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip2: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip2: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: tulip2: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: eth7: Digital DS21143 Tulip rev 65 at 0xf89fd800, 00:C0:95:C8:0E:82, IRQ 96.
Mar 4 11:27:45 localhost kernel: tulip3: EEPROM default media type Autosense.
Mar 4 11:27:45 localhost kernel: tulip3: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip3: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip3: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: tulip3: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: eth8: Digital DS21143 Tulip rev 65 at 0xf89ffc00, 00:C0:95:C8:0E:83, IRQ 96.
Mar 4 11:27:45 localhost random: Initializing random number generator: succeeded
Mar 4 11:27:45 localhost netfs: Mounting other filesystems: succeeded
Mar 4 11:27:45 localhost autofs: automount startup succeeded
Mar 4 11:27:45 localhost sshd: Starting sshd:
Mar 4 11:27:45 localhost sshd: succeeded
Mar 4 11:27:45 localhost sshd: [
Mar 4 11:27:45 localhost sshd:
Mar 4 11:27:45 localhost rc: Starting sshd: succeeded
Mar 4 11:27:46 localhost crond: crond startup succeeded
Mar 4 11:27:46 localhost syscheck: Starting syscheck:
Mar 4 11:27:09 localhost rc.sysinit: Mounting proc filesystem: succeeded
Mar 4 11:27:09 localhost rc.sysinit: Unmounting initrd: succeeded
Mar 4 11:27:09 localhost sysctl: net.ipv4.ip_forward = 0
Mar 4 11:27:09 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 4 11:27:09 localhost sysctl: kernel.sysrq = 0
Mar 4 11:27:09 localhost sysctl: kernel.core_uses_pid = 1
Mar 4 11:27:09 localhost rc.sysinit: Configuring kernel parameters: succeeded
Mar 4 11:27:09 localhost date: Tue Mar 4 11:27:09 EST 2003
Mar 4 11:27:09 localhost rc.sysinit: Setting clock (localtime): Tue Mar 4 11:27:09 EST 2003 succeeded
Mar 4 11:27:09 localhost rc.sysinit: Activating swap partitions: succeeded
Mar 4 11:27:09 localhost rc.sysinit: Setting hostname localhost.localdomain: succeeded
Mar 4 11:27:09 localhost fsck: /: clean, 19675/131560 files, 144942/525056 blocks
Mar 4 11:27:09 localhost fsck: [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/md2
Mar 4 11:27:09 localhost rc.sysinit: Checking root filesystem succeeded
Mar 4 11:27:09 localhost rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Mar 4 11:27:15 localhost rc.sysinit: Finding module dependencies: succeeded
Mar 4 11:27:15 localhost fsck: /boot: clean, 44/66000 files, 29937/262976 blocks
Mar 4 11:27:16 localhost fsck: /tmp: clean, 13/131328 files, 12339/262144 blocks
Mar 4 11:27:16 localhost fsck: /usr: clean, 80488/525312 files, 372902/1048576 blocks
Mar 4 11:27:16 localhost fsck: /var: clean, 783/131560 files, 62986/525056 blocks
Mar 4 11:27:16 localhost fsck: /var/TKLC: clean, 44/525312 files, 25880/1048576 blocks
Mar 4 11:27:16 localhost fsck: /var/TKLC/recove: clean, 12/131560 files, 24852/525056 blocks
Mar 4 11:27:16 localhost fsck: /var/TKLC/recov1: clean, 11/525312 files, 24703/1048576 blocks
Mar 4 11:27:16 localhost fsck: /var/TKLC/swap: clean, 18/1987136 files, 3744162/3968208 blocks
Mar 4 11:27:16 localhost fsck: Checking all file systems.
Mar 4 11:27:16 localhost rc.sysinit: Checking filesystems succeeded
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/md1
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /tmp] fsck.ext3 -a /dev/md6
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a /dev/md5
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a /dev/md7
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var/TKLC] fsck.ext3 -a /dev/md8
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var/TKLC/recovery] fsck.ext3 -a /dev/md9
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var/TKLC/recovery/usr] fsck.ext3 -a /dev/md10
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var/TKLC/swap] fsck.ext3 -a /dev/md11
Mar 4 11:27:16 localhost rc.sysinit: Mounting local filesystems: succeeded
Mar 4 11:27:16 localhost rc.sysinit: Enabling local filesystem quotas: succeeded
Mar 4 11:27:17 localhost rc.sysinit: Enabling swap space: succeeded
Mar 4 11:27:17 localhost hdparm: setting unmaskirq to 1 (on)
Mar 4 11:27:17 localhost hdparm: unmaskirq = 1 (on)
Mar 4 11:27:17 localhost rc.sysinit: Setting hard drive parameters for hda: succeeded
Mar 4 11:27:17 localhost hdparm: setting unmaskirq to 1 (on)
Mar 4 11:27:17 localhost rc.sysinit: Setting hard drive parameters for hdc: succeeded
Mar 4 11:27:17 localhost hdparm: unmaskirq = 1 (on)
Mar 4 11:27:19 localhost init: Entering runlevel: 3
Mar 4 11:27:19 localhost pid_conf: Running pid_conf:
Mar 4 11:27:19 localhost pid_conf: WARNING!!! Could not open pidfile for read!!!
Mar 4 11:27:19 localhost pid_conf: PIDFILE: /var/TKLC/run/syscheck.pid
Mar 4 11:27:19 localhost pid_conf: failed
Mar 4 11:27:19 localhost pid_conf: [
Mar 4 11:27:19 localhost rc: Starting pid_conf: succeeded
Mar 4 11:27:20 localhost sysctl: net.ipv4.ip_forward = 0
Mar 4 11:27:20 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 4 11:27:20 localhost sysctl: kernel.sysrq = 0
Mar 4 11:27:20 localhost sysctl: kernel.core_uses_pid = 1
Mar 4 11:27:20 localhost network: Setting network parameters: succeeded
Mar 4 11:27:20 localhost network: Bringing up loopback interface: succeeded
Mar 4 11:27:22 localhost network: Bringing up interface eth0: succeeded
Mar 4 11:27:25 localhost network: Bringing up interface eth1: succeeded
Mar 4 11:27:28 localhost network: Bringing up interface eth2: succeeded
Mar 4 11:27:31 localhost network: Bringing up interface eth3: succeeded
Mar 4 11:27:33 localhost network: Bringing up interface eth4: succeeded
Mar 4 11:27:36 localhost network: Bringing up interface eth5: succeeded
Mar 4 11:27:38 localhost network: Bringing up interface eth6: succeeded
Mar 4 11:27:41 localhost network: Bringing up interface eth7: succeeded
Mar 4 11:27:43 localhost network: Bringing up interface eth8: succeeded
Mar 4 11:27:47 localhost atd: atd startup succeeded
Mar 4 11:27:58 localhost login(pam_unix)[1596]: session opened for user root by LOGIN(uid=0)
Mar 4 11:27:58 localhost -- root[1596]: DIALUP AT ttyS0 BY root
Mar 4 11:27:58 localhost -- root[1596]: ROOT LOGIN ON ttyS0
next reply other threads:[~2003-03-04 16:21 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-04 16:26 david.knierim [this message]
2003-03-04 16:41 ` Linus Torvalds
2003-03-04 17:54 ` Ron Arts
2003-03-04 18:26 ` Ivan Kokshaysky
2003-03-04 18:54 ` Linus Torvalds
2003-03-04 19:37 ` Ron Arts
2003-03-04 22:46 ` Zwane Mwaikambo
2003-03-04 23:22 ` Ron Arts
2003-03-04 23:58 ` Zwane Mwaikambo
2003-03-04 22:46 ` Ivan Kokshaysky
2003-03-04 23:12 ` kuznet
2003-03-05 11:06 ` Ivan Kokshaysky
2003-03-05 13:54 ` Ron Arts
2003-03-07 19:19 ` [fixed] " Ivan Kokshaysky
2003-03-10 18:43 ` jamal
2003-03-11 12:39 ` Ivan Kokshaysky
-- strict thread matches above, loose matches on Subject: below --
2003-03-04 21:50 david.knierim
2003-03-02 17:44 jamal
2003-03-03 12:14 ` Ivan Kokshaysky
2003-03-03 16:01 ` David S. Miller
2003-03-04 1:51 ` jamal
2003-03-04 1:48 ` jamal
2003-03-04 15:28 ` Ivan Kokshaysky
2003-03-04 18:16 ` Donald Becker
2003-03-04 22:30 ` Ivan Kokshaysky
2003-03-04 22:59 ` kuznet
2003-03-04 23:36 ` Donald Becker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=OFDDD85BEC.1AD47C42-ON85256CDF.0059DE8B@nc.tekelec.com \
--to=david.knierim@tekelec.com \
--cc=Robert.Olsson@data.slu.se \
--cc=alexander@netintact.se \
--cc=becker@scyld.com \
--cc=greg@kroah.com \
--cc=hadi@cyberus.ca \
--cc=ink@jurassic.park.msu.ru \
--cc=jgarzik@pobox.com \
--cc=kuznet@ms2.inr.ac.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=raarts@office.netland.nl \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®