From: "Nicolas Nilles" <nnilles@skycop.net>
To: <linux-kernel@vger.kernel.org>, <sensors@stimpy.netroedge.com>
Cc: <greg@kroah.com>
Subject: RE: Kernel 2.6.0 and i2c-viapro posible Bug
Date: Thu, 8 Jan 2004 12:11:45 -0300 [thread overview]
Message-ID: <OLEKJGKIEPMKIGIPLDBNCELKCDAA.nnilles@skycop.net> (raw)
In-Reply-To: <20040107223046.093ea670.khali@linux-fr.org>
Well with 2.6.1-rc2 Kernel works great, i dont have any kind of problem,
with 2.4.24 i dont try, i gonna try.. today or tomorrow... then i post the
results, but i use it with 2.4.20-gentoo-r9 (gentoo sources) +
i2c+lm-sensors, and it work with no problem at all...
This is whenni try loading first i2c-viapro and then w82781d and the when i
unload the modules.. the problem persist..
Without ACPI support in the kernel it happen the same thing... no mother
whitch module i load first, when i load the 2nd module, stuck... if you want
i send you the dmesg, and code of this test.
Now i going to download the 2.4.24 Kernel, and then i try with it and send
the results.
root@schoolgirl rem # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 668 MB in 2.01 seconds = 332.72 MB/sec
Timing buffered disk reads: 66 MB in 3.05 seconds = 21.64 MB/sec
root@schoolgirl rem # lsmod
Module Size Used by
root@schoolgirl rem # modprobe i2c-viapro
root@schoolgirl rem # lsmod
Module Size Used by
i2c_viapro 4908 0
i2c_core 20836 1 i2c_viapro
root@schoolgirl rem # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 668 MB in 2.00 seconds = 333.38 MB/sec
Timing buffered disk reads: 66 MB in 3.05 seconds = 21.62 MB/sec
root@schoolgirl rem # modprobe w83781d
root@schoolgirl rem # lsmod
Module Size Used by
w83781d 33920 0
i2c_sensor 2272 1 w83781d
i2c_viapro 4908 0
i2c_core 20836 3 w83781d,i2c_sensor,i2c_viapro
root@schoolgirl rem # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 160 MB in 2.03 seconds = 78.64 MB/sec
Timing buffered disk reads: 56 MB in 3.10 seconds = 18.08 MB/sec
root@schoolgirl rem # modprobe -r w83781d
root@schoolgirl rem # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 160 MB in 2.01 seconds = 79.46 MB/sec
Timing buffered disk reads: 56 MB in 3.04 seconds = 18.42 MB/sec
root@schoolgirl rem # modprobe -r i2c_viapro
root@schoolgirl rem # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 160 MB in 2.03 seconds = 78.95 MB/sec
Timing buffered disk reads: 56 MB in 3.02 seconds = 18.56 MB/sec
root@schoolgirl rem # lsmod
Module Size Used by
root@schoolgirl rem # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 164 MB in 2.03 seconds = 80.96 MB/sec
Timing buffered disk reads: 56 MB in 3.02 seconds = 18.56 MB/sec
root@schoolgirl rem # lspci -n
00:00.0 Class 0600: 1106:0691 (rev c4)
00:01.0 Class 0604: 1106:8598
00:04.0 Class 0601: 1106:0686 (rev 40)
00:04.1 Class 0101: 1106:0571 (rev 06)
00:04.2 Class 0c03: 1106:3038 (rev 16)
00:04.3 Class 0c03: 1106:3038 (rev 16)
00:04.4 Class 0600: 1106:3057 (rev 40)
00:09.0 Class 0200: 10ec:8139 (rev 10)
00:0a.0 Class 0401: 1102:0002 (rev 05)
00:0a.1 Class 0980: 1102:7002 (rev 05)
01:00.0 Class 0300: 10de:0181 (rev a2)
Thanks
Rem
------------
Nicolas Nilles (Rem)
http://schoolgirl.homeunix.net
-----Mensaje original-----
De: Jean Delvare [mailto:khali@linux-fr.org]
Enviado el: miercoles, 07 de enero de 2004 18:31
Para: Nicolas Nilles
CC: linux-kernel@vger.kernel.org; greg@kroah.com;
sensors@stimpy.netroedge.com
Asunto: Re: Kernel 2.6.0 and i2c-viapro posible Bug
> I thinks that thgere is probably a bug in I2c-viapro module,
> cuz when i load i2c-viapro after loading w82781d, my computer just
> put very slow..., i try loading as modules in the kernel or built in,
> in both cases i have the same problem.
>
> I use 2.6.0 Vanilla Kernel sources.
> Please i will really apreciate if some one responde to this
> mail, put my adress in the CC field please cuz i not in the LKML.
> If someone need another information about my computer, config..
> or somehting more, just ask for it.
>
> Thanks.
Tested this on my own system with similar hardware (as far as i2c is
concerned) under 2.6.1-rc2. I did not experience any slowdown.
Could you please provide the following information:
* Output of "lspci -n".
* Can you reproduce the problem with a 2.4.24 kernel and i2c+lm_sensors
2.8.2?
* Can you reproduce the problem with a 2.6.1-rc2 kernel?
* Can you reproduce the problem without ACPI support enabled into your
kernel?
* Does the slowdown affect only the hard-disk drive?
* Does the speed come back to normal if you remove i2c-viapro?
* Does the slowdown occur if you load i2c-viapro before w83781d?
Yeah, I know, this is much work, but we need a hint to start digging.
Thanks.
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
next prev parent reply other threads:[~2004-01-08 15:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-07 19:55 Nicolas Nilles
2004-01-07 21:30 ` Jean Delvare
2004-01-08 15:11 ` Nicolas Nilles [this message]
2004-01-09 18:55 Ivanovich
2004-01-10 11:41 ` Jean Delvare
2004-01-10 14:40 ` Ivanovich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=OLEKJGKIEPMKIGIPLDBNCELKCDAA.nnilles@skycop.net \
--to=nnilles@skycop.net \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sensors@stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®