RE: [PATCH 3/4] dt-bindings: clock: Add AST2700 clock bindings

[Ryan Chen <ryan_chen@aspeedtech.com>]

> Subject: Re: [PATCH 3/4] dt-bindings: clock: Add AST2700 clock bindings
>
> Le 08/08/2024 à 09:59, Ryan Chen a écrit :
> > Add dt bindings for AST2700 clock controller
> >
> > Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
> > ---
> >   .../dt-bindings/clock/aspeed,ast2700-clk.h    | 175
> ++++++++++++++++++
> >   1 file changed, 175 insertions(+)
> >   create mode 100644 include/dt-bindings/clock/aspeed,ast2700-clk.h
> >
> > diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h
> > b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> > new file mode 100644
> > index 000000000000..facf72352c3e
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> > @@ -0,0 +1,175 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > +/*
> > + * Device Tree binding constants for AST2700 clock controller.
> > + *
> > + * Copyright (c) 2024 Aspeed Technology Inc.
> > + */
> > +
> > +#ifndef __DT_BINDINGS_CLOCK_AST2700_H #define
> > +__DT_BINDINGS_CLOCK_AST2700_H
> > +
> > +/* SOC0 clk-gate */
> > +#define SCU0_CLK_GATE_MCLK (0)
> > +#define SCU0_CLK_GATE_ECLK (1)
> > +#define SCU0_CLK_GATE_2DCLK        (2)
> > +#define SCU0_CLK_GATE_VCLK (3)
> > +#define SCU0_CLK_GATE_BCLK (4)
> > +#define SCU0_CLK_GATE_VGA0CLK      (5)
> > +#define SCU0_CLK_GATE_REFCLK       (6)
> > +#define SCU0_CLK_GATE_PORTBUSB2CLK (7)
> > +#define SCU0_CLK_GATE_RSV8 (8)
> > +#define SCU0_CLK_GATE_UHCICLK      (9)
> > +#define SCU0_CLK_GATE_VGA1CLK      (10)
> > +#define SCU0_CLK_GATE_DDRPHYCLK    (11)
> > +#define SCU0_CLK_GATE_E2M0CLK      (12)
> > +#define SCU0_CLK_GATE_HACCLK       (13)
> > +#define SCU0_CLK_GATE_PORTAUSB2CLK (14)
> > +#define SCU0_CLK_GATE_UART4CLK     (15)
> > +#define SCU0_CLK_GATE_SLICLK       (16)
> > +#define SCU0_CLK_GATE_DACCLK       (17)
> > +#define SCU0_CLK_GATE_DP   (18)
> > +#define SCU0_CLK_GATE_E2M1CLK      (19)
> > +#define SCU0_CLK_GATE_CRT0CLK      (20)
> > +#define SCU0_CLK_GATE_CRT1CLK      (21)
> > +#define SCU0_CLK_GATE_VLCLK        (22)
> > +#define SCU0_CLK_GATE_ECDSACLK     (23)
> > +#define SCU0_CLK_GATE_RSACLK       (24)
> > +#define SCU0_CLK_GATE_RVAS0CLK     (25)
> > +#define SCU0_CLK_GATE_UFSCLK       (26)
> > +#define SCU0_CLK_GATE_EMMCCLK      (27)
> > +#define SCU0_CLK_GATE_RVAS1CLK     (28)
> > +/* reserved 29 ~ 31*/
> > +#define SCU0_CLK_GATE_NUM  (SCU0_CLK_GATE_RVAS1CLK + 1)
> > +
> > +/* SOC0 clk */
> > +#define SCU0_CLKIN         (SCU0_CLK_GATE_NUM + 0)
>
> So SCU0_CLKIN is 28+1+0 = 29 which is said to be reserved in the comment
> above.

Acutely, I keep reserved is because data sheet has reserved bits from 29~31.
If you have concern about it, I can remove the comment.
Or are you prefer by following?
#define SCU0_CLK_GATE_RESERVED29        (29)
#define SCU0_CLK_GATE_RESERVED30        (30)
#define SCU0_CLK_GATE_RESERVED31        (31)
#define SCU0_CLK_GATE_NUM       (SCU0_CLK_GATE_RESERVED31 + 1)

>
> > +#define SCU0_CLK_24M               (SCU0_CLK_GATE_NUM + 1)
> > +#define SCU0_CLK_192M              (SCU0_CLK_GATE_NUM + 2)
> > +#define SCU0_CLK_UART              (SCU0_CLK_GATE_NUM + 3)
> > +#define SCU0_CLK_PSP               (SCU0_CLK_GATE_NUM + 4)
> > +#define SCU0_CLK_HPLL              (SCU0_CLK_GATE_NUM + 5)
>
> ...

************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊，並受法律保護。如 台端非指定之收件者，請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!

DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.