mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Biju Das <biju.das.jz@bp.renesas.com>
To: Claudiu.Beznea <claudiu.beznea@tuxon.dev>,
	"geert+renesas@glider.be" <geert+renesas@glider.be>,
	"linus.walleij@linaro.org" <linus.walleij@linaro.org>,
	"tglx@linutronix.de" <tglx@linutronix.de>
Cc: "linux-renesas-soc@vger.kernel.org"
	<linux-renesas-soc@vger.kernel.org>,
	"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Claudiu.Beznea <claudiu.beznea@tuxon.dev>,
	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: RE: [PATCH v3 2/2] pinctrl: renesas: rzg2l: Configure the interrupt type on resume
Date: Wed, 20 Mar 2024 11:08:38 +0000	[thread overview]
Message-ID: <OSAPR01MB158778802C8AAF3F9230259286332@OSAPR01MB1587.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <20240320104230.446400-3-claudiu.beznea.uj@bp.renesas.com>

Hi Claudiu,

> -----Original Message-----
> From: Claudiu <claudiu.beznea@tuxon.dev>
> Sent: Wednesday, March 20, 2024 10:43 AM
> Subject: [PATCH v3 2/2] pinctrl: renesas: rzg2l: Configure the interrupt type on resume
> 
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time") removed
> the setup of TINT from rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup of
> TINT has been moved in rzg2l_tint_set_edge() though rzg2l_disable_tint_and_set_tint_source(). With
> this, the interrupts are not properly re-configured after a suspend-to-RAM cycle. To address this issue
> and avoid spurious interrupts while resumming set the interrupt type before enabling it.

Just a question,

Previously you don't save/restore irq_type() register during suspend/resume()??
After STR, any way we will lose that information.

Cheers,
Biju



> 
> Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>  drivers/pinctrl/renesas/pinctrl-rzg2l.c | 22 ++++++++++++----------
>  1 file changed, 12 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index 93916553bcc7..4fee3b0e6c5e 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -2045,7 +2045,9 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
> 
>  	for (unsigned int i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
>  		struct irq_data *data;
> +		unsigned long flags;
>  		unsigned int virq;
> +		int ret;
> 
>  		if (!pctrl->hwirq[i])
>  			continue;
> @@ -2063,17 +2065,17 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
>  			continue;
>  		}
> 
> -		if (!irqd_irq_disabled(data)) {
> -			unsigned long flags;
> -
> -			/*
> -			 * This has to be atomically executed to protect against a concurrent
> -			 * interrupt.
> -			 */
> -			raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
> +		/*
> +		 * This has to be atomically executed to protect against a concurrent
> +		 * interrupt.
> +		 */
> +		raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
> +		ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data));
> +		if (ret)
> +			dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq);
> +		else if (!irqd_irq_disabled(data))
>  			rzg2l_gpio_irq_enable(data);
> -			raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
> -		}
> +		raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
>  	}
>  }
> 
> --
> 2.39.2


  reply	other threads:[~2024-03-20 11:08 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-20 10:42 [PATCH v3 0/2] pinctrl: renesas: rzg2l: fixes for pinctrl driver Claudiu
2024-03-20 10:42 ` [PATCH v3 1/2] pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration Claudiu
2024-03-20 10:42 ` [PATCH v3 2/2] pinctrl: renesas: rzg2l: Configure the interrupt type on resume Claudiu
2024-03-20 11:08   ` Biju Das [this message]
2024-03-20 11:28     ` claudiu beznea
2024-03-20 11:39       ` Biju Das
2024-04-18 14:07   ` Geert Uytterhoeven
2024-04-19  5:48     ` claudiu beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=OSAPR01MB158778802C8AAF3F9230259286332@OSAPR01MB1587.jpnprd01.prod.outlook.com \
    --to=biju.das.jz@bp.renesas.com \
    --cc=claudiu.beznea.uj@bp.renesas.com \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=geert+renesas@glider.be \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®