From: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Prabhakar <prabhakar.csengg@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>
Subject: RE: [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
Date: Fri, 23 Oct 2020 07:58:06 +0000 [thread overview]
Message-ID: <OSBPR01MB50486CFE2841AF24F648008DAA1A0@OSBPR01MB5048.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <CAMuHMdWM8uh3Rm4ghn94ZwkTE6rjOmHAThYCL_oh3=Fg+OpHgA@mail.gmail.com>
Hi Geert,
Thank you for the review.
> -----Original Message-----
> From: Geert Uytterhoeven <geert@linux-m68k.org>
> Sent: 23 October 2020 08:50
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>; Magnus Damm <magnus.damm@gmail.com>; Rob Herring <robh+dt@kernel.org>;
> Linux-Renesas <linux-renesas-soc@vger.kernel.org>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
> <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; Prabhakar <prabhakar.csengg@gmail.com>; Biju
> Das <biju.das.jz@bp.renesas.com>
> Subject: Re: [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
>
> Hi Prabhakar,
>
> On Tue, Oct 20, 2020 at 2:52 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
> > RZ/G2M board.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/arch/arm64/boot/dts/renesas/Makefile
> > +++ b/arch/arm64/boot/dts/renesas/Makefile
> > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
> > dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
> > dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
> > dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
> > +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-mipi-2.1.dtb
>
> I'll fix sort order while applying...
>
Oops I missed that, thank you for taking care of it.
Cheers,
Prabhakar
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> i.e. will queue in renesas-devel for v5.11.
>
> Gr{oetje,eeting}s,
>
> Geert
>
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
next prev parent reply other threads:[~2020-10-23 7:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-20 12:51 [PATCH v2 0/4] HiHope RZ/G2x add MIPI Adapter board support Lad Prabhakar
2020-10-20 12:51 ` [PATCH v2 1/4] arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor Lad Prabhakar
2020-10-23 7:48 ` Geert Uytterhoeven
2020-10-20 12:51 ` [PATCH v2 2/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H Lad Prabhakar
2020-10-23 7:49 ` Geert Uytterhoeven
2020-10-23 9:05 ` Niklas Söderlund
2020-10-20 12:51 ` [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M Lad Prabhakar
2020-10-23 7:50 ` Geert Uytterhoeven
2020-10-23 7:58 ` Prabhakar Mahadev Lad [this message]
2020-10-20 12:51 ` [PATCH v2 4/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N Lad Prabhakar
2020-10-23 7:50 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=OSBPR01MB50486CFE2841AF24F648008DAA1A0@OSBPR01MB5048.jpnprd01.prod.outlook.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=geert@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®