From: "Escala, Edelweise" <Edelweise.Escala@analog.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"linux-leds@vger.kernel.org" <linux-leds@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH 1/2] dt-bindings: leds: Document LTC3220 18 channel LED Driver
Date: Wed, 7 Jan 2026 09:52:19 +0000 [thread overview]
Message-ID: <PH0PR03MB6525F2AB63E24564356ADE51ED84A@PH0PR03MB6525.namprd03.prod.outlook.com> (raw)
In-Reply-To: <20260106-crystal-ambrosial-wildebeest-0e35d6@quoll>
> On Tue, Jan 06, 2026 at 01:27:07PM +0800, Edelweise Escala wrote:
> > Add dt-binding for ltc3220. LTC3220 18 Channel LED driver
>
> Subject, commit msg, binding: driver as Linux driver? If yes, then rewrite
> everything to match hardware.
>
> Otherwise what is exactly a LED driver? I know motor drivers.
>
I will rewrite to match hardware.
> >
> > Signed-off-by: Edelweise Escala <edelweise.escala@analog.com>
> > ---
> > .../devicetree/bindings/leds/leds-ltc3220.yaml | 131
> +++++++++++++++++++++
> > MAINTAINERS | 7 ++
> > 2 files changed, 138 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/leds/leds-ltc3220.yaml
> > b/Documentation/devicetree/bindings/leds/leds-ltc3220.yaml
> > new file mode 100644
> > index 000000000000..33285a7ac7a3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/leds-ltc3220.yaml
>
> Filename matching compatible.
>
>
> > @@ -0,0 +1,131 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://urldefense.com/v3/__http://devicetree.org/schemas/leds/leds-l
> > +tc3220.yaml*__;Iw!!A3Ni8CS0y2Y!-
> bTmoOEA7bjPt5CM_hEEqaRU4x0nvJNS2Y926U
> > +ULgO8UsbmEQwBUHq-AZjzofrOg5HnnWnBflY9LKFGVrA$
> > +$schema:
> > +https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.y
> > +aml*__;Iw!!A3Ni8CS0y2Y!-
> bTmoOEA7bjPt5CM_hEEqaRU4x0nvJNS2Y926UULgO8Usb
> > +mEQwBUHq-AZjzofrOg5HnnWnBflY9BRg_sig$
> > +
> > +title: Analog Devices LTC3220 LED Drivers
> > +
> > +maintainers:
> > + - Edelweise Escala <edelweise.escala@analog.com>
> > +
> > +description: Bindings for the Analog Devices LTC3220 18 channel LED
> Drivers.
>
> Missing wrapping after description. Look at other bindings.
>
> Also, drop "Bindings for". You should describe here hardware, not that
> binding is a binding for.
>
I will fix the missing wrapping and improve the description.
> > +
> > + For more product information please see the link below
> > + https://www.analog.com/en/products/ltc3220.html
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - adi,ltc3220
> > + - adi,ltc3220-1
>
> What is -1 device? Why description does not help here at all?
>
It is just a version of ltc3220 with different slave address, I will drop it.
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + '#address-cells':
> > + const: 1
> > +
> > + '#size-cells':
> > + const: 0
> > +
> > + reset-gpios:
> > + maxItems: 1
> > + description: GPIO attached to the chip's reset pin
>
> Drop description, obvious, redundant.
>
> > +
> > + adi,force-cpo-level:
> > + $ref: /schemas/types.yaml#/definitions/string
> > + description: Forces the Charge Pump Output to a specified multiplier.
> > + enum:
> > + - "0" # Auto(default) - Automatically selects optimal charge pump mode
> > + - "1.5"
> > + - "2"
> > + - "1"
>
> Numbers are not a string, so choose appropriate number format. Also, oddly
> sorted. I don't understand what this property is for so not sure what to
> recommend.
It is arranged this way to match the value for the register.
I plan to keep it as string and just do
enum:
- auto
- 1.5x
- 2x
- 1x
>
> > + default: "0"
> > +
> > + adi,quick-write:
> > + type: boolean
> > + description: If present, LED 1 output becomes a master control that
> > + simultaneously updates all 18 LED outputs using the hardware's quick-
> write
> > + mode. When enabled, led@1 must be defined in the device tree to
> provide
> > + the control interface, even if no physical LED is connected to the D1
> > + output pin. When disabled or not present, LED 1 operates as a normal
> > + independent LED output.
>
> If there is no led@1 physically, you cannot add it to the DT. It seems you
> described some sort of driver behavior, instead of hardware.
>
This is also a hardware feature, when enabled a write to the LED 1
output register simultaneously updates all 18 LED output registers
to the same value.
> > +
> > +patternProperties:
> > + "^led@([1-9]|1[0-8])$":
>
> Use consistent quotes, so '.
>
> > + type: object
> > + $ref: /schemas/leds/common.yaml#
> > + unevaluatedProperties: false
> > + properties:
> > + reg:
> > + description: Output channel for the LED (1-18 maps to LED outputs
> D1-D18).
> > + minimum: 1
> > + maximum: 18
>
Best Regards,
Edelweise
next prev parent reply other threads:[~2026-01-07 9:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-06 5:27 [PATCH 0/2] Add Support for LTC3220 18 Channel " Edelweise Escala
2026-01-06 5:27 ` [PATCH 1/2] dt-bindings: leds: Document LTC3220 18 channel " Edelweise Escala
2026-01-06 8:12 ` Krzysztof Kozlowski
2026-01-07 9:52 ` Escala, Edelweise [this message]
2026-01-07 10:57 ` Krzysztof Kozlowski
2026-01-08 6:02 ` Escala, Edelweise
2026-01-06 5:27 ` [PATCH 2/2] leds: ltc3220: add driver Edelweise Escala
2026-01-06 8:14 ` Krzysztof Kozlowski
2026-01-07 9:52 ` Escala, Edelweise
2026-01-06 12:03 ` Jacek Anaszewski
2026-01-07 9:52 ` Escala, Edelweise
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PH0PR03MB6525F2AB63E24564356ADE51ED84A@PH0PR03MB6525.namprd03.prod.outlook.com \
--to=edelweise.escala@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®