From: Tarang Raval <tarang.raval@siliconsignals.io>
To: Kieran Bingham <kieran.bingham@ideasonboard.com>,
"sakari.ailus@linux.intel.com" <sakari.ailus@linux.intel.com>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 1/2] media: i2c: imx219: switch to {enable,disable}_streams
Date: Wed, 5 Mar 2025 10:12:13 +0000 [thread overview]
Message-ID: <PN3P287MB182955C5B846B0DC522E10BC8BCB2@PN3P287MB1829.INDP287.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <174116672182.2914008.912215873023431841@ping.linuxembedded.co.uk>
Hi Kieran,
> Quoting Tarang Raval (2025-03-05 06:13:08)
> > Switch from s_stream to enable_streams and disable_streams callbacks.
> >
> > Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
> > ---
> > drivers/media/i2c/imx219.c | 43 +++++++++++++++-----------------------
> > 1 file changed, 17 insertions(+), 26 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> > index f662c9d75511..75d3123d47b4 100644
> > --- a/drivers/media/i2c/imx219.c
> > +++ b/drivers/media/i2c/imx219.c
> > @@ -723,12 +723,17 @@ static int imx219_configure_lanes(struct imx219 *imx219)
> > ARRAY_SIZE(imx219_4lane_regs), NULL);
> > };
> >
> > -static int imx219_start_streaming(struct imx219 *imx219,
> > - struct v4l2_subdev_state *state)
> > +static int imx219_enable_streams(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *state, u32 pad,
> > + u64 streams_mask)
> > {
> > + struct imx219 *imx219 = to_imx219(sd);
> > struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
> > int ret;
> >
> > + if (pad != 0)
> > + return -EINVAL;
> > +
> > ret = pm_runtime_resume_and_get(&client->dev);
> > if (ret < 0)
> > return ret;
> > @@ -767,10 +772,6 @@ static int imx219_start_streaming(struct imx219 *imx219,
> > if (ret)
> > goto err_rpm_put;
> >
> > - /* vflip and hflip cannot change during streaming */
> > - __v4l2_ctrl_grab(imx219->vflip, true);
> > - __v4l2_ctrl_grab(imx219->hflip, true);
> > -
>
> Why do you drop these lines? It's not mentioned in the commit message.
> Are these handled somewhere else now ?
Thank you for catching that. I had made this patch earlier and sent it without
re-verifying the changes.
I should have reviewed it thoroughly before submitting.
I will correct this in the next version.
Apologies for the inconvenience.
Best Regards,
Tarang
> --
> Kieran
>
>
> > return 0;
> >
> > err_rpm_put:
> > @@ -778,37 +779,25 @@ static int imx219_start_streaming(struct imx219 *imx219,
> > return ret;
> > }
> >
> > -static void imx219_stop_streaming(struct imx219 *imx219)
> > +static int imx219_disable_streams(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *state, u32 pad,
> > + u64 streams_mask)
> > {
> > + struct imx219 *imx219 = to_imx219(sd);
> > struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
> > int ret;
> >
> > + if (pad != 0)
> > + return -EINVAL;
> > +
> > /* set stream off register */
> > ret = cci_write(imx219->regmap, IMX219_REG_MODE_SELECT,
> > IMX219_MODE_STANDBY, NULL);
> > if (ret)
> > dev_err(&client->dev, "%s failed to set stream\n", __func__);
> >
> > - __v4l2_ctrl_grab(imx219->vflip, false);
> > - __v4l2_ctrl_grab(imx219->hflip, false);
> > -
> > pm_runtime_put(&client->dev);
> > -}
> > -
> > -static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
> > -{
> > - struct imx219 *imx219 = to_imx219(sd);
> > - struct v4l2_subdev_state *state;
> > - int ret = 0;
> > -
> > - state = v4l2_subdev_lock_and_get_active_state(sd);
> > -
> > - if (enable)
> > - ret = imx219_start_streaming(imx219, state);
> > - else
> > - imx219_stop_streaming(imx219);
> >
> > - v4l2_subdev_unlock_state(state);
> > return ret;
> > }
> >
> > @@ -992,7 +981,7 @@ static int imx219_init_state(struct v4l2_subdev *sd,
> > }
> >
> > static const struct v4l2_subdev_video_ops imx219_video_ops = {
> > - .s_stream = imx219_set_stream,
> > + .s_stream = v4l2_subdev_s_stream_helper,
> > };
> >
> > static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
> > @@ -1001,6 +990,8 @@ static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
> > .set_fmt = imx219_set_pad_format,
> > .get_selection = imx219_get_selection,
> > .enum_frame_size = imx219_enum_frame_size,
> > + .enable_streams = imx219_enable_streams,
> > + .disable_streams = imx219_disable_streams,
> > };
> >
> > static const struct v4l2_subdev_ops imx219_subdev_ops = {
> > --
> > 2.34.1
> >
next prev parent reply other threads:[~2025-03-05 10:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-05 6:13 [PATCH v2 0/2] media: i2c: imx219: Minor improvements for runtime PM and stream handling Tarang Raval
2025-03-05 6:13 ` [PATCH v2 1/2] media: i2c: imx219: switch to {enable,disable}_streams Tarang Raval
2025-03-05 9:25 ` Kieran Bingham
2025-03-05 10:12 ` Tarang Raval [this message]
2025-03-05 6:13 ` [PATCH v2 2/2] media: i2c: imx219: Enable runtime PM autosuspend Tarang Raval
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PN3P287MB182955C5B846B0DC522E10BC8BCB2@PN3P287MB1829.INDP287.PROD.OUTLOOK.COM \
--to=tarang.raval@siliconsignals.io \
--cc=dave.stevenson@raspberrypi.com \
--cc=kieran.bingham@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®