From: Dexuan Cui <decui@microsoft.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
Stephen Hemminger <sthemmin@microsoft.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"driverdev-devel@linuxdriverproject.org"
<driverdev-devel@linuxdriverproject.org>,
KY Srinivasan <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Sasha Levin <Alexander.Levin@microsoft.com>,
Michael Kelley <mikelley@microsoft.com>
Subject: [PATCH] PCI: hv: Add hv_pci_remove_slots() when we unload the driver
Date: Thu, 7 Feb 2019 20:36:32 +0000 [thread overview]
Message-ID: <PU1P153MB0169F06340FC519C2802C5CFBF680@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM> (raw)
When we unload pci-hyperv, the host doesn't send us a PCI_EJECT message.
In this case we also need to make sure the sysfs pci slot directory
is removed, otherwise "cat /sys/bus/pci/slots/2/address" will trigger
"BUG: unable to handle kernel paging request". And, if we unload/reload
the driver several times, we'll have multiple pci slot directories in
/sys/bus/pci/slots/ like this:
root@localhost:~# ls -rtl /sys/bus/pci/slots/
total 0
drwxr-xr-x 2 root root 0 Feb 7 10:49 2
drwxr-xr-x 2 root root 0 Feb 7 10:49 2-1
drwxr-xr-x 2 root root 0 Feb 7 10:51 2-2
The patch adds the missing code, and in hv_eject_device_work() it also
moves pci_destroy_slot() to an earlier place where we hold the pci lock.
Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
---
drivers/pci/controller/pci-hyperv.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 9ba4d12c179c..6b4773727525 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1491,6 +1491,21 @@ static void hv_pci_assign_slots(struct hv_pcibus_device *hbus)
}
}
+/*
+ * Remove entries in sysfs pci slot directory.
+ */
+static void hv_pci_remove_slots(struct hv_pcibus_device *hbus)
+{
+ struct hv_pci_dev *hpdev;
+
+ list_for_each_entry(hpdev, &hbus->children, list_entry) {
+ if (!hpdev->pci_slot)
+ continue;
+ pci_destroy_slot(hpdev->pci_slot);
+ hpdev->pci_slot = NULL;
+ }
+}
+
/**
* create_root_hv_pci_bus() - Expose a new root PCI bus
* @hbus: Root PCI bus, as understood by this driver
@@ -1887,6 +1902,10 @@ static void hv_eject_device_work(struct work_struct *work)
pci_lock_rescan_remove();
pci_stop_and_remove_bus_device(pdev);
pci_dev_put(pdev);
+ if (hpdev->pci_slot) {
+ pci_destroy_slot(hpdev->pci_slot);
+ hpdev->pci_slot = NULL;
+ }
pci_unlock_rescan_remove();
}
@@ -1894,9 +1913,6 @@ static void hv_eject_device_work(struct work_struct *work)
list_del(&hpdev->list_entry);
spin_unlock_irqrestore(&hpdev->hbus->device_list_lock, flags);
- if (hpdev->pci_slot)
- pci_destroy_slot(hpdev->pci_slot);
-
memset(&ctxt, 0, sizeof(ctxt));
ejct_pkt = (struct pci_eject_response *)&ctxt.pkt.message;
ejct_pkt->message_type.type = PCI_EJECTION_COMPLETE;
@@ -2682,6 +2698,7 @@ static int hv_pci_remove(struct hv_device *hdev)
pci_lock_rescan_remove();
pci_stop_root_bus(hbus->pci_bus);
pci_remove_root_bus(hbus->pci_bus);
+ hv_pci_remove_slots(hbus);
pci_unlock_rescan_remove();
hbus->state = hv_pcibus_removed;
}
--
2.19.1
next reply other threads:[~2019-02-07 20:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-07 20:36 Dexuan Cui [this message]
2019-02-08 0:44 ` Stephen Hemminger
[not found] ` <20190211172608.E873D2229F@mail.kernel.org>
2019-02-11 18:09 ` Dexuan Cui
2019-02-12 12:12 ` Lorenzo Pieralisi
2019-02-13 0:17 ` Dexuan Cui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PU1P153MB0169F06340FC519C2802C5CFBF680@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM \
--to=decui@microsoft.com \
--cc=Alexander.Levin@microsoft.com \
--cc=bhelgaas@google.com \
--cc=driverdev-devel@linuxdriverproject.org \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mikelley@microsoft.com \
--cc=sthemmin@microsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®