From: Liakakis Kostas <kostas@skiathos.physics.auth.gr>
To: Lionel Bouton <Lionel.Bouton@inet6.fr>
Cc: linux-kernel@vger.kernel.org,
Liakakis Kostas <kostas@skiathos.physics.auth.gr>
Subject: Re: [PATCH RFC] SiS 2.4 IDE driver update (+= ATA16|ATA33|ATA100)
Date: Fri, 25 Jan 2002 20:02:43 +0200 (EET) [thread overview]
Message-ID: <Pine.GSO.4.21.0201251942130.19355-200000@skiathos.physics.auth.gr> (raw)
In-Reply-To: <20020125172155.A11517@bouton.inet6-interne.fr>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 527 bytes --]
Well, success :-)
Stock 2.4.17 doesn't hang any more :-)
One question though, hdparm -i/I says my drive is udma2 (UDMA/33 isnt it?)
capable. Why don't I get it on boot? (or is my chipset UDMA/33 capable?).
hdparm -X66 /dev/hda hangs the machine completely. Same with 65 and 64.
The debug messages that appear when I do so say:
sis5513_tune_chipset start, changed registers: none
sis5513_tune_chipset ,drive 0, speed 66
sis5513_tune_chipset end, changed registers: none
Attached is the boot time debug info.
Thanks,
-K.
[-- Attachment #2: Type: TEXT/PLAIN, Size: 1442 bytes --]
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 09
PCI: Assigned IRQ 14 for device 00:01.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513 pci_init_sis5513 start
SIS5513 dump:
0x0:0x39 0x1:0x10 0x2:0x13 0x3:0x55 0x4:0x7 0x5:0x0 0x6:0x0 0x7:0x0 0x8:0xd0 0x9:0x8a 0xa:0x1 0xb:0x1 0xc:0x0 0xd:0x40 0xe:0x80 0xf:0x0
0x10:0xf1 0x11:0x1 0x12:0x0 0x13:0x0 0x14:0xf5 0x15:0x3 0x16:0x0 0x17:0x0 0x18:0x71 0x19:0x1 0x1a:0x0 0x1b:0x0 0x1c:0x75 0x1d:0x3 0x1e:0x0 0x1f:0x0
0x20:0x1 0x21:0x40 0x22:0x0 0x23:0x0 0x24:0x0 0x25:0x0 0x26:0x0 0x27:0x0 0x28:0x0 0x29:0x0 0x2a:0x0 0x2b:0x0 0x2c:0x0 0x2d:0x0 0x2e:0x0 0x2f:0x0
0x30:0x0 0x31:0x0 0x32:0x0 0x33:0x0 0x34:0x0 0x35:0x0 0x36:0x0 0x37:0x0 0x38:0x0 0x39:0x0 0x3a:0x0 0x3b:0x0 0x3c:0xe 0x3d:0x1 0x3e:0x0 0x3f:0x0
0x40:0x1 0x41:0xa3 0x42:0x0 0x43:0x0 0x44:0x0 0x45:0x0 0x46:0x0 0x47:0x0 0x48:0x0 0x49:0x7 0x4a:0xa6 0x4b:0xff 0x4c:0x0 0x4d:0x2 0x4e:0x0 0x4f:0x2
SiS5513
SIS5513: pci_init_sis5513 end, changed registers:
none
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
hda: ST34321A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 8404830 sectors (4303 MB) w/128KiB Cache, CHS=523/255/63
Partition check:
next prev parent reply other threads:[~2002-01-25 18:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-25 16:21 Lionel Bouton
2002-01-25 18:02 ` Liakakis Kostas [this message]
2002-01-25 18:21 ` Lionel Bouton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.GSO.4.21.0201251942130.19355-200000@skiathos.physics.auth.gr \
--to=kostas@skiathos.physics.auth.gr \
--cc=Lionel.Bouton@inet6.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®