From: Evgeny Rodichev <er@sai.msu.su>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2.6.14-rc2] libata: Marvell SATA support (DMA mode)
Date: Sun, 2 Oct 2005 23:14:59 +0400 (MSD) [thread overview]
Message-ID: <Pine.GSO.4.63.0510022307280.5120@ra.sai.msu.su> (raw)
Hi,
this patch doesn't work for me. Controller is
03:04.0 RAID bus controller: Marvell MV88SX6041 4-port SATA II PCI-X Controller (rev 03)
Subsystem: Super Micro Computer Inc: Unknown device 6880
Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 64, IRQ 20
Memory at dd300000 (64-bit, non-prefetchable) [size=1M]
I/O ports at 3000 [size=256]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [60] PCI-X non-bridge device.
After modprobe sata_mv I got in dmesg:
sata_mv version 0.22
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 56 (level, low) -> IRQ 20
sata_mv(0000:03:04.0) 32 slots 4 ports unknown mode IRQ via INTx
ata3: SATA max UDMA/133 cmd 0x0 ctl 0xF8A22120 bmdma 0x0 irq 20
ata4: SATA max UDMA/133 cmd 0x0 ctl 0xF8A24120 bmdma 0x0 irq 20
ata5: SATA max UDMA/133 cmd 0x0 ctl 0xF8A26120 bmdma 0x0 irq 20
ata6: SATA max UDMA/133 cmd 0x0 ctl 0xF8A28120 bmdma 0x0 irq 20
ATA: abnormal status 0x80 on port 0xF8A2211C
ATA: abnormal status 0x80 on port 0xF8A2211C
modprobe did not finished, and it is impossible to kill the modprobe
process.
Regards,
E.R.
_________________________________________________________________________
Evgeny Rodichev Sternberg Astronomical Institute
email: er@sai.msu.su Moscow State University
Phone: 007 (095) 939 2383
Fax: 007 (095) 932 8841 http://www.sai.msu.su/~er
next reply other threads:[~2005-10-02 19:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-02 19:14 Evgeny Rodichev [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-09-23 19:42 Brett Russ
2005-09-23 20:10 ` Brett Russ
2005-09-26 18:49 ` Michael Madore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.GSO.4.63.0510022307280.5120@ra.sai.msu.su \
--to=er@sai.msu.su \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®