mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Julian Anastasov <ja@ssi.bg>
To: Josue Emmanuel Amaro <Josue.Amaro@oracle.com>
Cc: Andrea Arcangeli <andrea@suse.de>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: Value of TASK_UNMAPPED_SIZE on 2.4
Date: Sat, 4 Nov 2000 01:09:42 +0000 (GMT)	[thread overview]
Message-ID: <Pine.LNX.4.04.10011040055420.834-200000@u> (raw)

[-- Attachment #1: Type: TEXT/PLAIN, Size: 548 bytes --]


	Hello,

On Fri, 3 Nov 2000, Josue Emmanuel Amaro wrote:

> It would be great if it could be a kernel configuration time option.

	Something like the attached old patch for 2.2. It is very
optimistic in using 64MB as min value for TASK_UNMAPPED_BASE while
the real min is above 128MB (where malloc starts). May be needs tuning for
other archs. You still need to select good value for TASK_SIZE/PAGE_OFFSET
at compile time. I run the patch safely with
echo 195887104 > /proc/sys/kernel/task_unmapped_base


Regards

--
Julian Anastasov <ja@ssi.bg>

[-- Attachment #2: /proc/sys/kernel/task_unmapped_base --]
[-- Type: TEXT/PLAIN, Size: 2139 bytes --]

--- linux/include/linux/sysctl.h.orig	Fri Dec 17 00:04:36 1999
+++ linux/include/linux/sysctl.h	Fri Dec 17 00:22:26 1999
@@ -106,6 +106,7 @@
 	KERN_SYSRQ=38,		/* int: Sysreq enable */
 	KERN_SHMALL=41,		/* int: maximum size of shared memory */
 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
+	KERN_TASK_UNMAPPED_BASE=45,
 };
 
 
--- linux/kernel/sysctl.c.orig	Fri Dec 17 00:04:36 1999
+++ linux/kernel/sysctl.c	Fri Dec 17 00:25:59 1999
@@ -51,6 +51,12 @@
 extern int shmall_max;
 #endif
 
+#if defined(CONFIG_2GB) || defined(CONFIG_3GB) || defined(CONFIG_1GB)
+extern int min_task_unmapped_base;
+extern int cur_task_unmapped_base;
+extern int max_task_unmapped_base;
+#endif
+
 #ifdef __sparc__
 extern char reboot_command [];
 extern int stop_a_enabled;
@@ -226,6 +232,11 @@
 	{KERN_SHMALL, "shmall", &shmall, sizeof (int),
 	 0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
 	 NULL, &zero_value, &shmall_max},
+#endif
+#if defined(CONFIG_2GB) || defined(CONFIG_3GB) || defined(CONFIG_1GB)
+	{KERN_TASK_UNMAPPED_BASE, "task_unmapped_base", &cur_task_unmapped_base, sizeof (int),
+	0644, NULL, &proc_dointvec_minmax, &sysctl_intvec,
+	NULL, &min_task_unmapped_base, &max_task_unmapped_base},
 #endif
 #ifdef CONFIG_MAGIC_SYSRQ
 	{KERN_SYSRQ, "sysrq", &sysrq_enabled, sizeof (int),
--- linux/mm/mmap.c.orig	Fri Dec 17 00:04:36 1999
+++ linux/mm/mmap.c	Fri Dec 17 00:28:11 1999
@@ -41,6 +41,12 @@
 
 int sysctl_overcommit_memory;
 
+#if defined(CONFIG_2GB) || defined(CONFIG_3GB) || defined(CONFIG_1GB)
+int min_task_unmapped_base = 0x04000000;
+int cur_task_unmapped_base = TASK_UNMAPPED_BASE;
+int max_task_unmapped_base = 0x7FC00000;
+#endif
+
 /* Check that a process has enough memory to allocate a
  * new virtual mapping.
  */
@@ -362,7 +368,11 @@
 	if (len > TASK_SIZE)
 		return 0;
 	if (!addr)
+#if defined(CONFIG_2GB) || defined(CONFIG_3GB) || defined(CONFIG_1GB)
+		addr = (unsigned long) cur_task_unmapped_base;
+#else
 		addr = TASK_UNMAPPED_BASE;
+#endif
 	addr = PAGE_ALIGN(addr);
 
 	for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {

             reply	other threads:[~2000-11-03 23:11 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2000-11-04  1:09 Julian Anastasov [this message]
2000-11-04  0:51 ` Andrea Arcangeli
2000-11-04 10:37   ` Julian Anastasov
     [not found] <fa.d4dt9vv.1gm6abv@ifi.uio.no>
     [not found] ` <fa.ebii26v.1mgevrq@ifi.uio.no>
2000-11-03 20:27   ` Kai Harrekilde-Petersen
2000-11-03 20:46     ` Andrea Arcangeli
2000-11-03 22:36       ` Josue Emmanuel Amaro
2000-11-20  2:09         ` Andrea Arcangeli
  -- strict thread matches above, loose matches on Subject: below --
2000-11-03 19:15 Josue Emmanuel Amaro
2000-11-03 19:37 ` Andrea Arcangeli
2000-11-04  7:39 ` Josue Emmanuel Amaro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.04.10011040055420.834-200000@u \
    --to=ja@ssi.bg \
    --cc=Josue.Amaro@oracle.com \
    --cc=andrea@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®