mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andre Hedrick <andre@linux-ide.org>
To: Toby Jaffey <toby@earth.li>
Cc: linux-kernel@vger.kernel.org
Subject: Re: test-10 tulip "eth0 timed out" (smp, heavy IDE use)
Date: Mon, 27 Nov 2000 20:38:02 -0800 (PST)	[thread overview]
Message-ID: <Pine.LNX.4.10.10011272031070.17331-100000@master.linux-ide.org> (raw)
In-Reply-To: <20001128042134.A1041@twoey>


Toby,

Nothing can be done without the full re-write of the driver.
The global request_io_lock is slammed into play way to early and release
way to late.  You will have to suffer with this flaw until the spin of
2.5.  We are talking about a rewrite that is still at least 60 days from
being ready for me to test.

I still have to draft the recovery tools to mirror the disks for the data
lose in the pre-alpha tests.

On Tue, 28 Nov 2000, Toby Jaffey wrote:

> Using 2.4-test10 I got a series of timeout errors on my tulip network
> card (Linksys LNE version 4, 00:0d.0 Ethernet controller: Bridgecom,
> Inc: Unknown device 0985 (rev 11)). Networking then completely stopped
> working. Restarting the interface with ifconfig fixed the problem.
> 
> I am using an SMP kernel, compiled with gcc 2.95.2 on an ABit BP6 (dual
> celeron 500s, 128mb, PIIX4 using DMA).
> 
> [log extract]
> Nov 28 04:04:52 twoey kernel: NETDEV WATCHDOG: eth0: transmit timed out
> Nov 28 04:04:52 twoey kernel: eth0: Transmit timed out, status fc664010,
> CSR12 00000000, resetting...
> [end]
> 
> This has only happenned once so far, I have not been able to repeat the
> problem. At the time, I was simultanously using two cd drives to rip
> audio cds with DMA turned on, also I was using both processors fully.
> 
> -- 
> www.nott.ac.uk/~psystrj ..::::::::::::::::::::::::::::::::::::::::::::::::.
>      /\_./o__ ....:::::::::' Mescaline, the only way to fly.          '::::     
>     (/^/(_^~'      '':::::                                             ::::  
>   ___.(_.)____         ':::::::::::::::::::::::::::::::::::::::::::::::::::
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
> 

Andre Hedrick
CTO Timpanogas Research Group
EVP Linux Development, TRG
Linux ATA Development

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

  reply	other threads:[~2000-11-28  5:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2000-11-28  4:21 Toby Jaffey
2000-11-28  4:38 ` Andre Hedrick [this message]
2000-11-28  9:52 ` Lukasz Trabinski
2000-11-28 16:33   ` Francois romieu
2000-11-28 16:22     ` Lukasz Trabinski
2000-11-28  5:48 Jacob Luna Lundberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.10.10011272031070.17331-100000@master.linux-ide.org \
    --to=andre@linux-ide.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=toby@earth.li \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®