mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andre Hedrick <andre@linux-ide.org>
To: Petr Vandrovec <vandrove@vc.cvut.cz>
Cc: linux-kernel@vger.kernel.org
Subject: Re: PDC20265, disk corruption and NMI watchdog...
Date: Sun, 28 Jan 2001 17:36:01 -0800 (PST)	[thread overview]
Message-ID: <Pine.LNX.4.10.10101281735310.29071-100000@master.linux-ide.org> (raw)
In-Reply-To: <20010129015843.B16593@platan.vc.cvut.cz>


Everything but a kernel version :-(

On Mon, 29 Jan 2001, Petr Vandrovec wrote:

> Short story:
> 
> Hi Andre,
>   why on Earth ide_delay_50ms uses jiffies instead of mdelay(50) ?!
> It is invoked with interrupts disabled, causing NMI watchdog detected
> on my system, leading to complete crash of system.
> 
> Long story:
> 
> At home I have Asus A7V motherboard with 1G Athlon, and onboard
> PDC20265 and VIA KT133. Only CDROM is connected to VIA (as I was
> not able to get any ATAPI device with Promise under Linux).
> To primary master of PDC (hde) there is IBM-DTLA-307045, happilly
> running in UDMA5 mode. As secondary slave (hdh) there is removable
> hdd TOSHIBA MK6409MAV - I use this hdd to transport data between
> work, home and grandparents.
> 
> On every weekend I bring debian packages on this hdd home, as downloading
> couple of MBs each weekend is not acceptable for dialup connection.
> But data are never copied OK from one hdd (hdh) to another (hde) -
> - hdh runs in UDMA2, hde in UDMA5. There are always 4 different bytes
> in couple of files - corrupted bytes are always on word boundary, but
> sometime they are on dword, sometime they are not. Data are never
> moved, they are just random bytes... It looks like that
> problem is with removable HDD (source), not with UDMA5 destination.
> 
> So I decided to 'hdparm -d1 -X 65 /dev/hdh' to switch it to UDMA1.
> i was awarded by (4 times):
> 
> hde: dma_intr: bad DMA status
> hde: dma_intr: status = 0x50 { DriveReady SeekComplete }
> 
> and
> 
> hde: DMA disabled
> NMI watchdog detected lockup on CPU0, registers:
> ...
> Dump says that ide_delay_50ms was invoked with interrupts disabled
> in swapper task, through pdc202xx_reset -> do_reset1 -> ide_do_reset -> 
> ide_error -> ide_dma_intr -> ide_intr -> handle_IRQ_event -> do_IRQ -> 
> (interrupt) -> default_idle -> cpu_idle.
> 
> I have no idea why it compalined on hde, when I hdparm-ed hdh...
> So I rebooted - and after reboot fsck of hde* passed ok, but on
> hdh* it was not able to find debian tree - directory tree was cut to about
> 7 parts which were reconnected to /lost+found. Probably someone took
> deep look at some inodes, as fsck found about 1000 errors - it is too
> much from filesystem which could be modified only due to atime changes...
> 
> So I my questions are: 
> Is it ok to use pdc202xx driver at all? It does not complain about UDMA CRC 
>   errors, but data are (always) corrupted.
> Should I return back to UDMA66 VIA instead of UDMA100 promise? 
> Should I rejumper my removable HDD to be master, and not slave?
> 					Thanks,
> 						Petr Vandrovec
> 						vandrove@vc.cvut.cz  
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
> 

Andre Hedrick
Linux ATA Development

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

  reply	other threads:[~2001-01-29  1:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-01-29  0:58 Petr Vandrovec
2001-01-29  1:36 ` Andre Hedrick [this message]
     [not found] <20010129032315.K1085@ppc.vc.cvut.cz>
2001-01-29  2:35 ` Petr Vandrovec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.10.10101281735310.29071-100000@master.linux-ide.org \
    --to=andre@linux-ide.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vandrove@vc.cvut.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®