From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 11 May 2002 19:50:57 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 11 May 2002 19:50:56 -0400 Received: from astound-64-85-224-253.ca.astound.net ([64.85.224.253]:65041 "EHLO master.linux-ide.org") by vger.kernel.org with ESMTP id ; Sat, 11 May 2002 19:50:54 -0400 Date: Sat, 11 May 2002 16:48:19 -0700 (PDT) From: Andre Hedrick To: Pierre Rousselet cc: Martin Dalecki , Kernel Mailing List Subject: Re: [PATCH] 2.5.15 IDE 60 In-Reply-To: <3CDD7671.6010203@wanadoo.fr> Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I am sorry I can not do much for 2.5 at the moment. Please revert to 2.4.19-pre7 plus my mondo patch. bp6:~ # uname -a Linux bp6 2.4.19-pre7 #1 SMP Tue May 7 12:57:46 PDT 2002 i686 unknown 00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) Flags: bus master, medium devsel, latency 120, IRQ 18 I/O ports at d800 [size=8] I/O ports at dc00 [size=4] I/O ports at e000 [size=256] Expansion ROM at ea000000 [disabled] [size=128K] 00:13.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) Flags: bus master, medium devsel, latency 120, IRQ 18 I/O ports at e400 [size=8] I/O ports at e800 [size=4] I/O ports at ec00 [size=256] HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI bus 00 dev 98 PCI: Enabling device 00:13.0 (0005 -> 0007) HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio HPT366: IDE controller on PCI bus 00 dev 99 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide1: BM-DMA at 0xec00-0xec07, BIOS settings: hdc:DMA, hdd:pio hda: DupliDisk IDE RAID-1 Adapter( 1.19), ATA DISK drive hdc: QUANTUM FIREBALLP KA13.6, ATA DISK drive ide2: ports already in use, skipping probe ide0 at 0xd800-0xd807,0xdc02 on irq 18 ide1 at 0xe400-0xe407,0xe802 on irq 18 hda: host protected area => 1 hda: setmax LBA 18041184, native 18039168 hda: 18039168 sectors (9236 MB) w/371KiB Cache, CHS=17896/16/63, UDMA(66) hdc: host protected area => 1 hdc: 27068420 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(66) ide-floppy driver 0.99.newide Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 > /dev/ide/host1/bus0/target0/lun0: unknown partition table Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) If it still fails it is a driver-chipset problem. If it works in 2.4 but fails in 2.5 gawd only knows what is the issue. On Sat, 11 May 2002, Pierre Rousselet wrote: > Andre Hedrick wrote: > > You have to specify which of the 6 revisions of the chipset you have. > > Also in some cases which of the 13 sub-revisions, and the latter is > > determined by the sub-vender-device. > > hde is ST310212A UDMA(66), hdg is SAMSUNG SV0322A UDMA(33) (motherboard > BE6). > > # lspci -v gives (2.5.14 PCI_NAMES not set) : > > 00:13.0 Unknown mass storage controller: Triones Technologies, Inc. > HPT366 (rev 01) > Flags: bus master, medium devsel, latency 120, IRQ 11 > I/O ports at cc00 [size=8] > I/O ports at d000 [size=4] > I/O ports at d400 [size=256] > Expansion ROM at [disabled] [size=128K] > > 00:13.1 Unknown mass storage controller: Triones Technologies, Inc. > HPT366 (rev 01) > Flags: bus master, medium devsel, latency 120, IRQ 11 > I/O ports at d800 [size=8] > I/O ports at dc00 [size=4] > I/O ports at e000 [size=256] > > # scanpci -v: > > pci bus 0x0000 cardnum 0x13 function 0x00: vendor 0x1103 device 0x0004 > Device unknown > STATUS 0x0200 COMMAND 0x0005 > CLASS 0x01 0x80 0x00 REVISION 0x01 > BIST 0x00 HEADER 0x80 LATENCY 0x78 CACHE 0x08 > BASE0 0x0000cc01 addr 0x0000cc00 I/O > BASE1 0x0000d001 addr 0x0000d000 I/O > BASE4 0x0000d401 addr 0x0000d400 I/O > MAX_LAT 0x08 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b > BYTE_0 0x10c9a731 BYTE_1 0x00 BYTE_2 0x80736b0 BYTE_3 0xffffffff > > pci bus 0x0000 cardnum 0x13 function 0x01: vendor 0x1103 device 0x0004 > Device unknown > STATUS 0x0200 COMMAND 0x0007 > CLASS 0x01 0x80 0x00 REVISION 0x01 > BIST 0x00 HEADER 0x80 LATENCY 0x78 CACHE 0x08 > BASE0 0x0000d801 addr 0x0000d800 I/O > BASE1 0x0000dc01 addr 0x0000dc00 I/O > BASE4 0x0000e001 addr 0x0000e000 I/O > MAX_LAT 0x08 MIN_GNT 0x08 INT_PIN 0x02 INT_LINE 0x0b > BYTE_0 0x10caa731 BYTE_1 0x00 BYTE_2 0x8073a28 BYTE_3 0xffffffff > > # cat /proc/ide/hpt366 : > HighPoint HPT366/368/370 > > Controller: 0 > Chipset: HPT366 > --------------- Primary Channel --------------- Secondary Channel > -------------- > Enabled: yes yes > --------------- drive0 --------- drive1 ------- drive0 ---------- drive1 > ------- > DMA capable: yes no no no > Mode: UDMA off off off > > Controller: 1 > Chipset: HPT366 > --------------- Primary Channel --------------- Secondary Channel > -------------- > Enabled: yes yes > --------------- drive0 --------- drive1 ------- drive0 ---------- drive1 > ------- > DMA capable: yes no no no > Mode: UDMA off off off > > -- > Pierre > ------------------------------------------------ > Pierre Rousselet > ------------------------------------------------ > Andre Hedrick LAD Storage Consulting Group