From: Andre Hedrick <andre@linux-ide.org>
To: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Stef van der Made <svdmade@planet.nl>, linux-kernel@vger.kernel.org
Subject: Re: Onstream DI-30 not responding 2.6
Date: Sun, 20 Jul 2003 01:43:01 -0700 (PDT) [thread overview]
Message-ID: <Pine.LNX.4.10.10307200142170.21266-100000@master.linux-ide.org> (raw)
In-Reply-To: <Pine.SOL.4.30.0307171938370.20577-100000@mion.elka.pw.edu.pl>
Would help but my DI-30 is deadlocked and will not function regardless :-(
It is nothing but a paperweight now.
Andre Hedrick
LAD Storage Consulting Group
On Thu, 17 Jul 2003, Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> ide-tape driver is broken right now in 2.6.
> Config option for it is commented out because
> it even doesn't compile (easy to fix).
>
> I can help a bit if somebody wants to fix this driver.
> --
> Bartlomiej
>
> On Thu, 17 Jul 2003, Stef van der Made wrote:
> >
> > Hi
> >
> > I'm trying to use my Onstream DI-30 (IDE) tape device with Kernel
> > 2.6.0-test1. When trying to access the drive using the old 2.2 kernels
> > and 2.4 these commands worked fine
> >
> > bash-2.05# mt -f /dev/nht0 status
> > /dev/nht0: No such device
> > bash-2.05# mt -f /dev/ht0 status
> > /dev/ht0: No such device
> > bash-2.05# mt -f /dev/hdd status
> > /dev/hdd: No such device or address
> > bash-2.05# mt -f /dev/hdc status
> > /dev/hdc: No such device or address
> >
> > While they now are showing ugly errors.
> >
> > This is a part of the boot log
> >
> > VP_IDE: IDE controller at PCI slot 0000:00:07.1
> > VP_IDE: chipset revision 16
> > VP_IDE: not 100% native mode: will probe irqs later
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
> > ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA
> > ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:DMA
> > hda: WDC WD205BA, ATA DISK drive
> > anticipatory scheduling elevator
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > hdd: OnStream DI-30, ATAPI TAPE drive
> >
> >
> > Thanks in advance for any tips on a solution for this problem.
> >
> > Stef
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
prev parent reply other threads:[~2003-07-20 8:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-17 17:33 Stef van der Made
2003-07-17 17:46 ` Bartlomiej Zolnierkiewicz
2003-07-20 8:43 ` Andre Hedrick [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.10.10307200142170.21266-100000@master.linux-ide.org \
--to=andre@linux-ide.org \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=svdmade@planet.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®