From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 14 Jan 2001 04:03:37 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 14 Jan 2001 04:03:27 -0500 Received: from [64.160.188.242] ([64.160.188.242]:32011 "HELO mail.hislinuxbox.com") by vger.kernel.org with SMTP id ; Sun, 14 Jan 2001 04:03:15 -0500 Date: Sun, 14 Jan 2001 01:03:13 -0800 (PST) From: "David D.W. Downey" To: Tony Parsons Cc: linux-kernel@vger.kernel.org Subject: Re: ide.2.4.1-p3.01112001.patch In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I feel it important to note that the distrib in use for all of this is of my own design. The specs are at www.kixolinux.com. Why do I feel this is important? Possibly something I've done in the distrib could be affecting this as well. I remember reading some weeks ago about the 2.4.0-test## series + SCSI + SMP were having some problems. The drives are as follows ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:DMA hda: WDC WD153AA, ATA DISK drive hda: 30064608 sectors (15393 MB) w/2048KiB Cache, CHS=1871/255/63, UDMA(66) ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:DMA hdb: WDC WD300BB-00AUA1, ATA DISK drive hdb: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=3649/255/63, UDMA(66) ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio hdc: SAMSUNG CD-ROM SC-148F, ATAPI CDROM drive hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA The errors are as follows hdc: timeout waiting for DMA hdc: irq timeout: status=0xd0 { Busy } hdc: DMA disabled hdc: ATAPI reset complete hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 end_request: I/O error, dev 16:00 (hdc), sector 929520 hdc: irq timeout: status=0xd0 { Busy } hdc: ATAPI reset complete hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 end_request: I/O error, dev 16:00 (hdc), sector 929522 I get the same thing for hda and hdb though not as frequently as with hdc. (Controller doesn't like switchign between DMA and PIO modes possibly? ::shrug::) David D.W. Downey - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/