From: Cesar Suga <sartre@linuxbr.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: HPT366: DMA errors?
Date: Thu, 21 Feb 2002 23:55:34 -0300 (BRT) [thread overview]
Message-ID: <Pine.LNX.4.40.0202212352001.222-100000@sartre.linuxbr.com> (raw)
In-Reply-To: <E16e5Zw-0000al-00@the-village.bc.nu>
On Fri, 22 Feb 2002, Alan Cox wrote:
> > through these messages when using the *original* ATA cable (never touched
> > before) or a replacement one:
> > hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> CRC error -> cable/wiring problem. If you are using UDMA66/100 you must
> have an 80pin cable. If you are using UDMA33 and can't pin it down then
> an 80pin cable doesnt do any harm
Yes, I am using the 80pin cable. The BP6 board has the normal IDE
controller and the HPT controller. The normal IDE controller which I said
was the common 40pin one. The DMA66 cable, certainly, is the 80 pin.
I cannot use the 80pin cable with the normal IDE for it does not
fit. But I tried with two 80-pin cables.
Thanks,
Cesar Suga <sartre@linuxbr.com>
next prev parent reply other threads:[~2002-02-22 2:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-22 2:14 Cesar Suga
2002-02-22 2:36 ` Alan Cox
2002-02-22 2:55 ` Cesar Suga [this message]
2002-02-22 3:02 ` Mike Fedyk
2002-02-22 6:47 ` Cesar Suga
2002-02-23 13:44 ` Wessel Dankers
2002-02-25 20:06 ` Bill Davidsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.40.0202212352001.222-100000@sartre.linuxbr.com \
--to=sartre@linuxbr.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®