From: Sven Koch <haegar@sdinet.de>
To: Linux-Kernel-Mailinglist <linux-kernel@vger.kernel.org>
Subject: 2.4.20-pre5-ac1: 80pin cable detection wrong?
Date: Sun, 1 Sep 2002 03:11:08 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.44.0209010303240.12765-100000@space.comunit.de> (raw)
hi...
Just installed kernel 2.4.20-pre5-ac1 and it seems to get the
cable-detection on my promise-controller wrong:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha1
[logs about the internal piix4 removed, this one works]
PDC20268: IDE controller at PCI slot 00:0f.0
PCI: Found IRQ 11 for device 00:0f.0
PDC20268: chipset revision 2
PDC20268: not 100% native mode: will probe irqs later
PDC20268: ROM enabled at 0xe7000000
ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:pio, hdh:pio
hda: IBM-DJNA-352030, ATA DISK drive
hdc: WDC WD600AB-32CZA0, ATA DISK drive
hdd: ASUS CD-S400/A, ATAPI CD/DVD-ROM drive
hde: MAXTOR 4K080H4, ATA DISK drive
ULTRA 66/100/133: Primary channel of Ultra 66/100/133 requires an 80-pin
cable for Ultra66 operation.
Switching to Ultra33 mode.
Warning: Primary channel requires an 80-pin cable for operation.
hde reduced to Ultra33 mode.
hdg: MAXTOR 4K080H4, ATA DISK drive
ULTRA 66/100/133: Secondary channel of Ultra 66/100/133 requires an 80-pin
cable for Ultra66 operation.
Switching to Ultra33 mode.
Warning: Secondary channel requires an 80-pin cable for operation.
hdg reduced to Ultra33 mode.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xdc00-0xdc07,0xe002 on irq 11
ide3 at 0xe400-0xe407,0xe802 on irq 11
[...]
hde: host protected area => 1
hde: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63,
UDMA(100)
hdg: host protected area => 1
hdg: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63,
UDMA(100)
Both of the 80gb Maxtor-drives are connected to the promise pci-controller
with a 80pin-cable each.
c'ya
sven
--
The Internet treats censorship as a routing problem, and routes around it.
(John Gilmore on http://www.cygnus.com/~gnu/)
reply other threads:[~2002-09-01 1:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.44.0209010303240.12765-100000@space.comunit.de \
--to=haegar@sdinet.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®