From: "Richard B. Johnson" <root@chaos.analogic.com>
To: Ed Vance <EdV@macrolink.com>
Cc: Linux kernel <linux-kernel@vger.kernel.org>
Subject: RE: Linux-2.4.20 modem control
Date: Mon, 17 Mar 2003 16:33:08 -0500 (EST) [thread overview]
Message-ID: <Pine.LNX.4.53.0303171617440.23874@chaos> (raw)
In-Reply-To: <11E89240C407D311958800A0C9ACF7D1A33DE6@EXCHANGE>
On Mon, 17 Mar 2003, Ed Vance wrote:
> On Mon, Mar 17, 2003 at 8:19 AM, Richard B. Johnson wrote:
> > Hello any tty gurus,
> >
> > If a modem is connected to /dev/ttyS0 and a getty (actually agetty)
> > is associated with that device, one can log-in using that modem.
> >
> > This is how we've operated for many years. But, Linux version 2.4.20
> > presents a new problem.
> >
> > When a logged-in caller logs out, it is mandatory for the modem
> > to disconnect. This has previously been done automatically when
> > the terminal is closed. The closing of the tasks file-descriptors
> > will eventually call tty_hangup() and the modem would (previously)
> > hang up.
> >
> > Something has changed so that the hang-up sequence doesn't happen if
> > agetty has already opened the terminal for another possible
> > connection.
> > It used to be that the caller, calling close(), did not get control
> > back until the modem had been hung up. This prevented another agetty
> > from opening that terminal for I/O because the previous task had not
> > completed its exit procedure until the terminal was hung up.
> >
> > Now, the hang-up sequence appears to be queued. It can (and does)
> > happen after the previous terminal owner has expired and another
> > owner has opened the device. This makes /dev/ttyS0 useless for remote
> > log-ins.
> >
> > It needs to be, that a 'close()' of a terminal, configured as a modem,
> > cannot return to the caller until after the DTR has been lowered, and
> > preferably, after waiting a few hundred milliseconds. Without this,
> > once logged in, the modem will never disconnect so a new caller
> > can't log in.
> >
> > With faster machines, it is not sufficient to just lower DTR. One
> > needs to lower DTR and then wait. This is because the next task
> > can open that terminal in a few hundred microseconds, raising
> > DTR again. This is not enough time for the modem to hang up because
> > there is "glitch-filtering" on all modem-control leads. The hang-up
> > event won't even be seen by the modem.
> >
> > So, either the modem control needs to be reverted to its previous
> > functionality or `agetty` needs to hang up its terminal when it
> > starts, which seems backwards. In other words, the user of kernel
> > services should not have to compensate for a defect in the logic
> > of that service.
> >
> > I have temporarily "fixed" this problem by modifying `agetty`.
> > Can the kernel please be fixed instead?
> >
> Hi Richard,
>
> Is the HUPCL cflags option (termio hang-up-on-close) asserted
> when the close happens?
>
> The "drop DTR and then wait a bit" behavior is requested by the
> HUPCL termio option. Otherwise, if CLOCAL is off, it is supposed
> to just drop DTR with no guarantee of holding it low for any
> particular amount of time.
>
> cheers,
> Ed
Well I didn't want to have to re-write agetty. Upon boot, before
init spawns an agetty, I initialize the modem in 'raw' mode like
this......
/*
* Set to dumb RAW mode with no echo and no character interpretation.
*/
memset(&io_mod, 0x00, sizeof(io_mod)); /* bzero() is obsolete */
io_mod.c_cflag = B57600|CS8|CREAD|CLOCAL;
io_mod.c_iflag = IGNBRK|IGNPAR;
io_mod.c_cc[VMIN] = (cc_t) 1;
io_mod.c_cc[VTIME] = (cc_t) 1;
if(ioctl(fd, TCSETS, &io_mod) < 0)
{
fprintf(stderr, "ioctl of %s failed setting parameters (%s)\n",
argv[1], strerror(errno));
ERROR_EXIT;
}
(void)hangup(fd, buffer);
Hangup just sets the baud-rate to B0 while keeing all other parameters
the same. It waits a second, then restores the c_clag variables.
This program then sends initialization strings to the modem, reads
any echo, then closes. This makes sure that agetty gets connected
to a modem that will actually answer a call. Agetty sleeps in open()
because it attempts to open the terminal in blocking mode. That way
agetty will only wake up after a connection is made. Agetty then
sets its own parameters which include HUPCL Line 1116:
tp->c_cflag = CS8|HUPCL|CREAD| op->speeds[FIRST_SPEED];
Later on, it sets CRTSCTS when it examines the device parameters.
So, although my initialization program didn't set HUPCL, agetty did.
The problem is that agetty execs (does not fork and exec) so it becomes
/bin/login. /bin/login execs and becomes /bin/bash. There is no
program waiting to restore modem parameters. When /bin/bash exits,
/sbin/init will spawn another agetty task and the process repeats.
If, when /bin/bash exits, the close doesn't lower DTR long enough,
the modem will not hang up.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.20 on an i686 machine (797.90 BogoMips).
Why is the government concerned about the lunatic fringe? Think about it.
next prev parent reply other threads:[~2003-03-17 21:04 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-17 20:07 Ed Vance
2003-03-17 21:33 ` Richard B. Johnson [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-03-21 0:45 Ed Vance
2003-03-21 12:24 ` Richard B. Johnson
2003-03-19 23:50 Ed Vance
2003-03-20 1:18 ` Richard B. Johnson
2003-03-20 22:13 ` Richard B. Johnson
2003-03-19 16:51 Ed Vance
2003-03-19 17:03 ` Richard B. Johnson
2003-03-19 22:32 ` Richard B. Johnson
2003-03-18 0:34 Ed Vance
2003-03-17 23:07 Ed Vance
2003-03-18 0:33 ` Richard B. Johnson
2003-03-18 18:34 ` Steve Lee
2003-03-18 19:17 ` Richard B. Johnson
2003-03-18 19:34 ` Steve Lee
2003-03-18 20:03 ` Richard B. Johnson
2003-03-20 18:51 ` Krzysztof Halasa
2003-03-17 16:19 Richard B. Johnson
2003-03-17 19:56 ` Jamie Lokier
2003-03-17 21:12 ` Richard B. Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.53.0303171617440.23874@chaos \
--to=root@chaos.analogic.com \
--cc=EdV@macrolink.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®