From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262889AbTDFKJ0 (for ); Sun, 6 Apr 2003 06:09:26 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262892AbTDFKJ0 (for ); Sun, 6 Apr 2003 06:09:26 -0400 Received: from node181b.a2000.nl ([62.108.24.27]:28817 "EHLO ddx.a2000.nu") by vger.kernel.org with ESMTP id S262889AbTDFKJY (for ); Sun, 6 Apr 2003 06:09:24 -0400 Date: Sun, 6 Apr 2003 12:20:42 +0200 (CEST) From: Stephan van Hienen To: Andre Hedrick cc: Mark Hahn , linux-kernel@vger.kernel.org Subject: Re: onboard ICH4 seen as ICH3 (ultra100 controller onboard) (2.4.20/2.4.21-pre7) In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Sat, 5 Apr 2003, Andre Hedrick wrote: > > Looking back over the thread, you have a failed cable detect. > I do not know why, but pat ide0=ata66 and ide1=ata66 to see if that is a > temp work-around. ok this works (but ide0=ata100/ide1=at100 doesn't work) hda: 351651888 sectors (180046 MB) w/2048KiB Cache, CHS=21889/255/63, UDMA(100) blk: queue c03ddf68, I/O limit 4095Mb (mask 0xffffffff) hdc: 351651888 sectors (180046 MB) w/2048KiB Cache, CHS=21889/255/63, UDMA(100) blk: queue c03de2cc, I/O limit 4095Mb (mask 0xffffffff) ]$ cat /proc/ide/piix Intel PIIX4 Ultra 100 Chipset. --------------- Primary Channel ---------------- Secondary Channel ------------- enabled enabled --------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------ DMA enabled: yes no yes no UDMA enabled: yes no yes no UDMA enabled: 3 X 3 X UDMA DMA PIO ]# hdparm -X69 /dev/hda /dev/hda: setting xfermode to 69 (UltraDMA mode5) ]# hdparm -X69 /dev/hdc /dev/hdc: setting xfermode to 69 (UltraDMA mode5) ]# cat /proc/ide/piix Intel PIIX4 Ultra 100 Chipset. --------------- Primary Channel ---------------- Secondary Channel ------------- enabled enabled --------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------ DMA enabled: yes no yes no UDMA enabled: yes no yes no UDMA enabled: 5 X 5 X UDMA DMA PIO > > You said nothing selected? > > Does that mean your bios is set to [none] for all devices? > If so change it to [auto], [none] tends to do strange things. then i get get the 'lba48 problem', my bios doesn't support lba48