From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261773AbTDKUee (for ); Fri, 11 Apr 2003 16:34:34 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261651AbTDKUd0 (for ); Fri, 11 Apr 2003 16:33:26 -0400 Received: from chaos.analogic.com ([204.178.40.224]:36488 "EHLO chaos.analogic.com") by vger.kernel.org with ESMTP id S261722AbTDKUdU (for ); Fri, 11 Apr 2003 16:33:20 -0400 Date: Fri, 11 Apr 2003 16:47:33 -0400 (EDT) From: "Richard B. Johnson" X-X-Sender: root@chaos Reply-To: root@chaos.analogic.com To: Mike Dresser cc: Chris Hanson , John Bradford , linux-kernel@vger.kernel.org, linux-hotplug-devel@lists.sourceforge.net Subject: Re: [ANNOUNCE] udev 0.1 release In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Fri, 11 Apr 2003, Mike Dresser wrote: > On Fri, 11 Apr 2003, Chris Hanson wrote: > > > Using a tree (what you are calling massively parallel) for > > distribution produces a uniform voltage drop for all of the devices, > > and has a better worst-case voltage drop than a serial chaining > > distribution. The serial chain has different voltage drops for each > > pair of disks, depending on how far down the chain they are, but the > > worst case is very bad. > > > > I do wonder how we're going to run the 46KW of power (Assuming these > drives pull similar to the drive i just checked) down the line. > > Should we use solid copper bars in a bus setup? You'll be pulling 2000 > amps off the 5v, and 3000 off the 12V. We may wish to rethink the method > of hooking up our 46000 watt power supply. I suspect a bus may be a > better way, and probably easier to setup and maintain. > > And much more fun when you drop a screwdriver across it. > > Mike Well the "real-world" parallels at a much higher voltage. You probably want a single power supply per drive, which eliminates any single-point failure problems and allows you to use standard stuff. To keep the heat-load down, you need to distribute the drives over several large racks anyway. That allows you to get perhaps 5 kW per rack if you use 9 racks so things are more reasonable. Cheers, Dick Johnson Penguin : Linux version 2.4.20 on an i686 machine (797.90 BogoMips). Why is the government concerned about the lunatic fringe? Think about it.