This may fall into the class of don't do that. I am getting the above BUG message when shutting down after doing an rmmod yenta_socket. Under 2.4 even if I remove the ethernet card from the PCMCIA slot on my laptop I get a module is busy message when I try to rmmod yenta_socket. 2.6 allows me to remove the module, whereupon I get a string of oops when rebooting. If I remove the module then reinsert it, I get an even uglier set of oops messages. Because my laptop doesn't have a serial port I will be unable to provide much additional information on oops messages. The best I can do is press the power button as soon as the first oops appears and read what I can off the screen. The messages are: Kernel BUG at include/linux/list.h:148 invalid operand EIP is at remove_wait_queue 0x13f/0x1a0 The configuration used to build the kernel is attached. The laptop is a Presario 12XL325 with a Texas Instruments PCI1410 PC card Cardbus Controller. I am running an updated Fedora Core 1 with 2.6.0 (also happens with mm1). I am using module-init-tools 0.9.15-pre4.lsmod shows: Module Size Used by orinoco_cs 8456 1 orinoco 60300 1 orinoco_cs hermes 9120 2 orinoco_cs,orinoco snd_pcm_oss 61476 0 snd_mixer_oss 20128 1 snd_pcm_oss snd_via82xx 29024 0 snd_pcm 118500 2 snd_pcm_oss,snd_via82xx snd_timer 33956 1 snd_pcm snd_ac97_codec 58948 1 snd_via82xx snd_page_alloc 10180 2 snd_via82xx,snd_pcm snd_mpu401_uart 10176 1 snd_via82xx snd_rawmidi 28320 1 snd_mpu401_uart snd_seq_device 7912 1 snd_rawmidi snd 65572 9 snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 8960 1 snd parport_pc 21588 1 lp 9056 0 parport 29920 2 parport_pc,lp ds 11492 3 orinoco_cs yenta_socket 16736 1 pcmcia_core 66848 3 orinoco_cs,ds,yenta_socket af_packet 25960 2 hid 26336 0 uhci_hcd 44656 0 usbcore 121148 4 hid,uhci_hcd rtc 20604 0 unix 28368 28