From: "Frédéric L. W. Meunier" <1@pervalidus.net>
To: linux-kernel@vger.kernel.org
Subject: Re: IO-APIC works on Windows and FreeBSD but not Linux ?
Date: Thu, 19 Feb 2004 16:27:39 -0300 (BRT) [thread overview]
Message-ID: <Pine.LNX.4.58.0402191616260.816@pervalidus.dyndns.org> (raw)
I wrote on 2004-01-24 0:57:44:
> I never got IO-APIC to work with my ECS K7VTA3 5.0 (KT333) on
> Linux 2.4 and 2.6. The first problem was at boot time with my
> network. It wouldn't give an IRQ or something to the lan, be
> it the onboard Realtek or a 3Com 3C905CX-TXNM.
Just tested with 2.6.3, and it still happens.
> ACPI with or without it was even worse, but I never needed
> it.
Everything seems to work fine with it now.
> It worked fine on Windows XP Professional SP1. Some days ago
> I installed FreeBSD 5.2 and now noticed it gave me IRQ18 for
> the onboard lan, IRQ22 for the onboard sound, and so on, and
> there's the following in /var/log/messages:
> Jan 23 15:27:07 pervalidus kernel: ioapic0: Assuming intbase
> of 0
> Jan 23 15:27:07 pervalidus kernel: ioapic0 <Version 0.3> irqs
> 0-23 on motherboard
> I'm just surprised IO-APIC works with it but not Linux.
Still surprised, because on it everything works if I use
IO-APIC with or without ACPI.
Here are the differences in /proc/pci (- is ACPI with IO-APIC,
+ IO-APIC):
I/O at 0xb800 [0xb81f].
Bus 0, device 16, function 3:
USB Controller: VIA Technologies, Inc. USB 2.0 (rev 130).
- IRQ 21.
+ IRQ 19.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xdd035000 [0xdd0350ff].
Bus 0, device 17, function 0:
ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge (rev 0).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 6).
- IRQ 20.
+ IRQ 27.
Master Capable. Latency=32.
I/O at 0xbc00 [0xbc0f].
Bus 0, device 17, function 5:
And /proc/interrupts:
- 9: 0 IO-APIC-level acpi
- 14: 1138 IO-APIC-edge ide0
+ 14: 777 IO-APIC-edge ide0
- 18: 24 IO-APIC-level eth0
- 21: 290 IO-APIC-level ehci_hcd, uhci_hcd, uhci_hcd, uhci_hcd
+ 21: 99 IO-APIC-level uhci_hcd, uhci_hcd, uhci_hcd
> I reported it months ago -
> http://www.uwsg.iu.edu/hypermail/linux/kernel/0306.2/1646.html
> BTW, the freezes I mentioned are gone. The motherboard may be
> a bit buggy, as they appear if I disable the onboard RAID,
> but...
--
http://www.pervalidus.net/contact.html
next reply other threads:[~2004-02-19 19:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-19 19:27 Frédéric L. W. Meunier [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-01-24 0:57 Frédéric L. W. Meunier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.58.0402191616260.816@pervalidus.dyndns.org \
--to=1@pervalidus.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®