From: "Frédéric L. W. Meunier" <1@pervalidus.net>
To: Nico Schottelius <nico-kernel@schottelius.org>
Cc: Bruce Allen <ballen@gravity.phys.uwm.edu>, linux-kernel@vger.kernel.org
Subject: Re: harddisk or kernel problem?
Date: Fri, 20 Feb 2004 14:10:09 -0300 (BRT) [thread overview]
Message-ID: <Pine.LNX.4.58.0402201407480.1167@pervalidus.dyndns.org> (raw)
In-Reply-To: <20040219081642.GE25184@schottelius.org>
On Thu, 19 Feb 2004, Nico Schottelius wrote:
> Steve Bromwich [Wed, Feb 18, 2004 at 08:06:47PM -0400]:
> > On Wed, 18 Feb 2004, Bruce Allen wrote:
> >
> > > > 194 Temperature_Celsius 0x0022 100 050 000 Old_age Always
> > > > - 48 (Lifetime Min/Max 14/65)
> > > >
> > > > If I'm reading this correctly, you've been running the drive when it's
> > > > extremely cold and extremely hot (Min/Max 14/65, I'm guessing that's
> > > > either Fahrenheit or a raw unconverted reading from the thermistor).
> > >
> > > Neither. Fujitsu uses Celsuis: 14, 48, and 65 are all in Celsuis.
> >
> > Good grief... I'm not surprised the drive's dying, then! I've seen drives
> > lock up around 35C, I'm quite impressed the drive is still chugging along
> > (to some extent, at least) at 48C - and a max of 65C? Looking at a few of
> > Fujitsu's pages (eg,
> > http://www.fujitsu.ca/products/mobile_hdd/mht_ah/physical_specs.html),
> > ambient operating temperature is 5C to 55C - perhaps that's the cause of
> > the drive dying?
> >
> > Just out of curiosity, Nico, what're you doing with these drives that
> > they're running so hot?
>
> You won't believe it.
> It ran in a standard ECS Elitebook A530 Notebook.
> I always waited some time (30 Minutes up to some hours), when it was
> cold outside.
> I am working with this laptop about 10-20 hours a day, it runs several
> compile runs, etc.
It isn't that hot, and by ambient temperature I assume it's the
local temperature, not of the hard drive.
194 Temperature_Celsius 0x0022 079 074 042 Old_age Always - 54
and has been running almost fine for over 2 years.
--
http://www.pervalidus.net/contact.html
next prev parent reply other threads:[~2004-02-20 17:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-13 7:54 Nico Schottelius
2004-02-13 8:11 ` Nico Schottelius
2004-02-13 9:52 ` Nico Schottelius
2004-02-13 16:17 ` Bartlomiej Zolnierkiewicz
2004-02-15 23:34 ` Nico Schottelius
2004-02-16 0:09 ` Bartlomiej Zolnierkiewicz
2004-02-18 16:55 ` Bruce Allen
2004-02-19 8:01 ` Nico Schottelius
2004-02-20 16:25 ` Bruce Allen
2004-03-02 20:07 ` Bruce Allen
2004-03-02 23:12 ` Nico Schottelius
2004-02-18 13:30 ` Steve Bromwich
2004-02-18 14:12 ` Nico Schottelius
2004-02-18 16:41 ` Bruce Allen
2004-02-19 0:06 ` Steve Bromwich
2004-02-19 8:16 ` Nico Schottelius
2004-02-20 17:10 ` Frédéric L. W. Meunier [this message]
2004-02-20 22:37 ` Eric D. Mudama
2004-02-13 16:56 ` Alex Goller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.58.0402201407480.1167@pervalidus.dyndns.org \
--to=1@pervalidus.net \
--cc=ballen@gravity.phys.uwm.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=nico-kernel@schottelius.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®