mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sven-Haegar Koch <haegar@sdinet.de>
To: Pavel Machek <pavel@ucw.cz>
Cc: Dave Jones <davej@codemonkey.org.uk>,
	Linux-Kernel-Mailinglist <linux-kernel@vger.kernel.org>
Subject: Re: Suspend/Resume support for ati-agp
Date: Mon, 9 Aug 2004 12:13:37 +0200 (CEST)	[thread overview]
Message-ID: <Pine.LNX.4.58.0408091203310.12175@mercury.sdinet.de> (raw)
In-Reply-To: <20040808195021.GB7765@elf.ucw.cz>

On Sun, 8 Aug 2004, Pavel Machek wrote:

> > while trying to debug a strange resume problem with 2.6.8-rc3-mm1 and
> > software suspend 2 I suspeced ati-agp, and created the following attached
> > patch to add powermanagement support for it.
> >
> > I don't know if it's the completely right thing to do, I just copied the
> > way via-agp and intel-agp do it - but perhaps you like it and want to send
> > it upstream.
>
> Looks good to me.
>
> > ps:
> > this did not fix the strange "weird vertical bars instead of movie in
> > mplayer after resume" I have, but does not do any bad things either
> > ;)
>
> Hmm, and does it fix anything?

Nothing I could find.

suspend to disk with swsusp in 2.6.8-rc3-mm1 does not work at all for me,
I just get a oops longer than screen height after resume, which I can't
capture because my thinkpad r40e does not have a serial port.
sorry, but I didnt test with it after creating this patch.

suspend to disk with softwaresuspend 2 works mostly, I just need to
remove and reload the snd_ali5154 soundmodule after resume, and mplayer
output with -vo xv is broken.

pmdisk in 2.6.7-mm5 worked with the same problems as softwaresuspend 2 in
the newer kernel.


>
> 									Pavel
>
>
> > --- linux/drivers/char/agp/ati-agp.c.orig	2004-08-08 02:53:10.000000000 +0200
> > +++ linux/drivers/char/agp/ati-agp.c	2004-08-08 03:06:03.000000000 +0200
> > @@ -505,6 +505,33 @@
> >  	agp_put_bridge(bridge);
> >  }
> >
> > +#ifdef CONFIG_PM
> > +
> > +static int agp_ati_suspend(struct pci_dev *pdev, u32 state)
> > +{
> > +	pci_save_state (pdev, pdev->saved_config_space);
> > +	pci_set_power_state (pdev, 3);
> > +
> > +	return 0;
> > +}
> > +
> > +static int agp_ati_resume(struct pci_dev *pdev)
> > +{
> > +	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
> > +
> > +	/* set power state 0 and restore PCI space */
> > +	pci_set_power_state (pdev, 0);
> > +	pci_restore_state(pdev, pdev->saved_config_space);
> > +
> > +	/* reconfigure AGP hardware again */
> > +	if (bridge->driver == &ati_generic_bridge)
> > +		return ati_configure();
> > +
> > +	return 0;
> > +}
> > +
> > +#endif /* CONFIG_PM */
> > +
> >  static struct pci_device_id agp_ati_pci_table[] = {
> >  	{
> >  	.class		= (PCI_CLASS_BRIDGE_HOST << 8),
> > @@ -524,6 +551,10 @@
> >  	.id_table	= agp_ati_pci_table,
> >  	.probe		= agp_ati_probe,
> >  	.remove		= agp_ati_remove,
> > +#ifdef CONFIG_PM
> > +	.suspend	= agp_ati_suspend,
> > +	.resume		= agp_ati_resume,
> > +#endif
> >  };
> >
> >  static int __init agp_ati_init(void)
>

c'ya
sven

-- 

The Internet treats censorship as a routing problem, and routes around it.
(John Gilmore on http://www.cygnus.com/~gnu/)

  reply	other threads:[~2004-08-09 10:13 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-08-08  1:39 Sven-Haegar Koch
2004-08-08 19:50 ` Pavel Machek
2004-08-09 10:13   ` Sven-Haegar Koch [this message]
2004-08-09 11:26     ` Pavel Machek
2004-08-09 11:48 ` Dave Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.58.0408091203310.12175@mercury.sdinet.de \
    --to=haegar@sdinet.de \
    --cc=davej@codemonkey.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®