From: Bodo Eggert <7eggert@gmx.de>
To: Bodo Eggert <7eggert@gmx.de>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] Kconfig changes 6: Move the Fusion MPT menu
Date: Mon, 4 Jul 2005 15:39:32 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.58.0507041520370.11818@be1.lrz> (raw)
In-Reply-To: <Pine.LNX.4.58.0507041251220.8687@be1.lrz>
On Mon, 4 Jul 2005, Bodo Eggert wrote:
> Part 4: The profiling menu.
^
Obviously I can't count to 5.
And now to something completely different:
The Fusion MPT controler seems to belong into the SCSI low level driver
submenu. I may well be wrong here.
patch is for 2.6.12, 2.6.13 will be posted in a reply
--- a/./arch/arm/Kconfig 2005-07-04 12:44:17.000000000 +0200
+++ b/./arch/arm/Kconfig 2005-07-04 13:04:23.000000000 +0200
@@ -695,8 +695,6 @@ source "drivers/scsi/Kconfig"
source "drivers/md/Kconfig"
-source "drivers/message/fusion/Kconfig"
-
source "drivers/ieee1394/Kconfig"
source "drivers/message/i2o/Kconfig"
--- a/./arch/v850/Kconfig 2005-05-02 02:25:41.000000000 +0200
+++ b/./arch/v850/Kconfig 2005-07-04 13:05:04.000000000 +0200
@@ -275,8 +275,6 @@ endmenu
source "drivers/md/Kconfig"
-source "drivers/message/fusion/Kconfig"
-
source "drivers/ieee1394/Kconfig"
source "drivers/message/i2o/Kconfig"
--- a/./arch/sparc64/Kconfig 2005-06-19 14:16:20.000000000 +0200
+++ b/./arch/sparc64/Kconfig 2005-07-04 13:05:19.000000000 +0200
@@ -506,10 +506,6 @@ source "drivers/fc4/Kconfig"
source "drivers/md/Kconfig"
-if PCI
-source "drivers/message/fusion/Kconfig"
-endif
-
source "drivers/ieee1394/Kconfig"
source "net/Kconfig"
--- a/./drivers/scsi/Kconfig 2005-07-04 11:10:43.000000000 +0200
+++ b/./drivers/scsi/Kconfig 2005-07-04 13:13:38.000000000 +0200
@@ -1489,19 +1489,6 @@ config SCSI_NSP32
To compile this driver as a module, choose M here: the
module will be called nsp32.
-config SCSI_DEBUG
- tristate "SCSI debugging host simulator"
- depends on SCSI
- help
- This is a host adapter simulator that can simulate multiple hosts
- each with multiple dummy SCSI devices (disks). It defaults to one
- host adapter with one dummy SCSI disk. Each dummy disk uses kernel
- RAM as storage (i.e. it is a ramdisk). To save space when multiple
- dummy disks are simulated, they share the same kernel RAM for
- their storage. See <http://www.torque.net/sg/sdebug.html> for more
- information. This driver is primarily of use to those testing the
- SCSI and block subsystems. If unsure, say N.
-
config SCSI_MESH
tristate "MESH (Power Mac internal SCSI) support"
depends on PPC32 && PPC_PMAC && SCSI
@@ -1791,6 +1778,21 @@ config ZFCP
called zfcp. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>.
-endmenu
+source "drivers/message/fusion/Kconfig"
source "drivers/scsi/pcmcia/Kconfig"
+
+config SCSI_DEBUG
+ tristate "SCSI debugging host simulator"
+ depends on SCSI
+ help
+ This is a host adapter simulator that can simulate multiple hosts
+ each with multiple dummy SCSI devices (disks). It defaults to one
+ host adapter with one dummy SCSI disk. Each dummy disk uses kernel
+ RAM as storage (i.e. it is a ramdisk). To save space when multiple
+ dummy disks are simulated, they share the same kernel RAM for
+ their storage. See <http://www.torque.net/sg/sdebug.html> for more
+ information. This driver is primarily of use to those testing the
+ SCSI and block subsystems. If unsure, say N.
+
+endmenu
--- a/./drivers/Kconfig 2005-05-02 02:25:41.000000000 +0200
+++ b/./drivers/Kconfig 2005-07-04 13:05:25.000000000 +0200
@@ -20,8 +20,6 @@ source "drivers/cdrom/Kconfig"
source "drivers/md/Kconfig"
-source "drivers/message/fusion/Kconfig"
-
source "drivers/ieee1394/Kconfig"
source "drivers/message/i2o/Kconfig"
--
S.U.Z.U.K.I.: Synthetic Unit Zoned for Ultimate Killing and Infiltration
-- http://www.brunching.com/toys/toy-cyborger.html
next prev parent reply other threads:[~2005-07-04 13:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-30 21:06 [PATCH] Kconfig changes: s/menu/menuconfig/ Bodo Eggert
2005-07-01 9:05 ` Bodo Eggert
2005-07-04 13:13 ` [PATCH][Update 2] " Bodo Eggert
2005-07-04 9:49 ` [PATCH] " Bodo Eggert
2005-07-04 9:55 ` Bodo Eggert
2005-07-04 12:24 ` [PATCH][Update] Kconfig changes 2b: s/menu/menuconfig/ USB menu Bodo Eggert
2005-07-04 10:15 ` [PATCH] Kconfig changes 3: s/menu/menuconfig/ APM menu Bodo Eggert
2005-07-04 10:23 ` Bodo Eggert
2005-07-04 10:40 ` [PATCH] Kconfig changes 4: s/menu/menuconfig/ CPU scaling menu Bodo Eggert
2005-07-04 10:43 ` Bodo Eggert
2005-07-04 10:53 ` Russell King
2005-07-04 12:02 ` Bodo Eggert
2005-07-04 10:53 ` [PATCH] Kconfig changes 4: s/menu/menuconfig/ profiling menu Bodo Eggert
2005-07-04 13:39 ` Bodo Eggert [this message]
2005-07-04 13:45 ` [PATCH] Kconfig changes 6: Move the Fusion MPT menu Bodo Eggert
2005-07-04 12:53 ` [PATCH] Kconfig changes 4: s/menu/menuconfig/ CPU scaling menu Bodo Eggert
2005-07-04 12:22 ` [PATCH][Update] Kconfig changes 2b: s/menu/menuconfig/ USB menu Bodo Eggert
2005-07-04 10:57 ` [PATCH] Kconfig changes: s/menu/menuconfig/ Sam Ravnborg
2005-07-04 12:37 ` Bodo Eggert
2005-07-04 12:35 ` [PATCH][Update] Kconfig changes 1b: s/menu/menuconfig/ Bodo Eggert
2005-07-04 13:11 ` [PATCH][Update 2] Kconfig changes: s/menu/menuconfig/ Bodo Eggert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.58.0507041520370.11818@be1.lrz \
--to=7eggert@gmx.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®