mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bodo Eggert <7eggert@gmx.de>
To: Bodo Eggert <7eggert@gmx.de>
Cc: akpm@osdl.org, torvalds@osdl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] [6/5+1] menu -> menuconfig part 1
Date: Sun, 17 Jul 2005 13:39:13 +0200 (CEST)	[thread overview]
Message-ID: <Pine.LNX.4.58.0507171336490.6041@be1.lrz> (raw)
In-Reply-To: <Pine.LNX.4.58.0507171311400.5931@be1.lrz>

On Sun, 17 Jul 2005, Bodo Eggert wrote:

> These patches change some menus into menuconfig options.
> 
> Reworked to apply to linux-2.6.13-rc3-git3

The Fusion driver is basically a scsi driver (isn't it?). Move it
to the other drivers and above the SCSI debugging driver.

 arch/arm/Kconfig     |    2 --
 arch/sparc64/Kconfig |    4 ----
 arch/v850/Kconfig    |    2 --
 drivers/Kconfig      |    2 --
 drivers/scsi/Kconfig |   30 ++++++++++++++++--------------
 5 files changed, 16 insertions(+), 24 deletions(-)

Signed-Off-By: Bodo Eggert <7eggert@gmx.de>

diff -rNup a/arch/arm/Kconfig b/arch/arm/Kconfig
--- a/arch/arm/Kconfig	2005-07-17 12:03:15.000000000 +0200
+++ b/arch/arm/Kconfig	2005-07-17 12:05:38.000000000 +0200
@@ -724,8 +724,6 @@ source "drivers/scsi/Kconfig"
 
 source "drivers/md/Kconfig"
 
-source "drivers/message/fusion/Kconfig"
-
 source "drivers/ieee1394/Kconfig"
 
 source "drivers/message/i2o/Kconfig"
diff -rNup a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
--- a/arch/sparc64/Kconfig	2005-07-17 08:09:35.000000000 +0200
+++ b/arch/sparc64/Kconfig	2005-07-17 12:05:38.000000000 +0200
@@ -547,10 +547,6 @@ source "drivers/fc4/Kconfig"
 
 source "drivers/md/Kconfig"
 
-if PCI
-source "drivers/message/fusion/Kconfig"
-endif
-
 source "drivers/ieee1394/Kconfig"
 
 source "drivers/net/Kconfig"
diff -rNup a/arch/v850/Kconfig b/arch/v850/Kconfig
--- a/arch/v850/Kconfig	2005-07-17 08:09:36.000000000 +0200
+++ b/arch/v850/Kconfig	2005-07-17 12:05:38.000000000 +0200
@@ -279,8 +279,6 @@ endmenu
 
 source "drivers/md/Kconfig"
 
-source "drivers/message/fusion/Kconfig"
-
 source "drivers/ieee1394/Kconfig"
 
 source "drivers/message/i2o/Kconfig"
diff -rNup a/drivers/Kconfig b/drivers/Kconfig
--- a/drivers/Kconfig	2005-07-17 08:09:37.000000000 +0200
+++ b/drivers/Kconfig	2005-07-17 12:05:38.000000000 +0200
@@ -20,8 +20,6 @@ source "drivers/cdrom/Kconfig"
 
 source "drivers/md/Kconfig"
 
-source "drivers/message/fusion/Kconfig"
-
 source "drivers/ieee1394/Kconfig"
 
 source "drivers/message/i2o/Kconfig"
diff -rNup a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
--- a/drivers/scsi/Kconfig	2005-07-17 11:53:22.000000000 +0200
+++ b/drivers/scsi/Kconfig	2005-07-17 12:05:38.000000000 +0200
@@ -1485,19 +1485,6 @@ config SCSI_NSP32
 	  To compile this driver as a module, choose M here: the
 	  module will be called nsp32.
 
-config SCSI_DEBUG
-	tristate "SCSI debugging host simulator"
-	depends on SCSI
-	help
-	  This is a host adapter simulator that can simulate multiple hosts
-	  each with multiple dummy SCSI devices (disks). It defaults to one
-	  host adapter with one dummy SCSI disk. Each dummy disk uses kernel
-	  RAM as storage (i.e. it is a ramdisk). To save space when multiple
-	  dummy disks are simulated, they share the same kernel RAM for 
-	  their storage. See <http://www.torque.net/sg/sdebug.html> for more
-	  information. This driver is primarily of use to those testing the
-	  SCSI and block subsystems. If unsure, say N.
-
 config SCSI_MESH
 	tristate "MESH (Power Mac internal SCSI) support"
 	depends on PPC32 && PPC_PMAC && SCSI
@@ -1787,6 +1774,21 @@ config ZFCP
           called zfcp. If you want to compile it as a module, say M here
           and read <file:Documentation/modules.txt>.
 
-endmenu
+source "drivers/message/fusion/Kconfig"
 
 source "drivers/scsi/pcmcia/Kconfig"
+
+config SCSI_DEBUG
+	tristate "SCSI debugging host simulator"
+	depends on SCSI
+	help
+	  This is a host adapter simulator that can simulate multiple hosts
+	  each with multiple dummy SCSI devices (disks). It defaults to one
+	  host adapter with one dummy SCSI disk. Each dummy disk uses kernel
+	  RAM as storage (i.e. it is a ramdisk). To save space when multiple
+	  dummy disks are simulated, they share the same kernel RAM for 
+	  their storage. See <http://www.torque.net/sg/sdebug.html> for more
+	  information. This driver is primarily of use to those testing the
+	  SCSI and block subsystems. If unsure, say N.
+
+endmenu

-- 
Top 100 things you don't want the sysadmin to say:
83. Damn, and I just bought that pop...

  parent reply	other threads:[~2005-07-17 11:41 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-07-17 11:12 [PATCH] [0/5+1] " Bodo Eggert
2005-07-17 11:29 ` [PATCH] [1/5+1] " Bodo Eggert
2005-07-17 17:03   ` [PATCH] [1b/5+1] " Bodo Eggert
2005-07-22  5:07     ` randy_dunlap
2005-07-22  9:37       ` [PATCH][RESEND] " Bodo Eggert
2005-07-22  5:52   ` [PATCH] [1/5+1] " randy_dunlap
2005-07-22  7:32     ` Jan Engelhardt
2005-07-24  9:50     ` Bodo Eggert
2005-07-22  6:11   ` randy_dunlap
2005-07-17 11:31 ` [PATCH] [2/5+1] " Bodo Eggert
2005-07-22  5:20   ` randy_dunlap
2005-07-17 11:32 ` [PATCH] [3/5+1] " Bodo Eggert
2005-07-17 11:33 ` [PATCH] [4/5+1] " Bodo Eggert
2005-07-17 11:36 ` [PATCH] [5/5+1] " Bodo Eggert
2005-07-17 11:39 ` Bodo Eggert [this message]
2005-07-17 13:45 ` [PATCH] [0/5+1] " Roman Zippel
2005-07-17 15:37   ` Bodo Eggert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.58.0507171336490.6041@be1.lrz \
    --to=7eggert@gmx.de \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®