From: Jesper Juhl <juhl-lkml@dif.dk>
To: Francois Romieu <romieu@cogenit.fr>
Cc: LKML <linux-kernel@vger.kernel.org>,
linux-net@vger.kernel.org, Andrew Morton <akpm@osdl.org>,
Adrian Bunk <bunk@fs.tum.de>
Subject: Re: [PATCH] fix inline related gcc 3.4 build failures in drivers/net/wan/dscc4.c
Date: Mon, 2 Aug 2004 00:25:10 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.60.0408020022520.28700@dragon.hygekrogen.localhost> (raw)
In-Reply-To: <20040801215625.GA29505@se1.cogenit.fr>
On Sun, 1 Aug 2004, Francois Romieu wrote:
> Jesper Juhl <juhl-lkml@dif.dk> :
> [inline fixes]
> > drivers/net/wan/dscc4.c: In function `dscc4_found1':
> > drivers/net/wan/dscc4.c:369: sorry, unimplemented: inlining failed in call to 'dscc4_set_quartz': function body not available
> > drivers/net/wan/dscc4.c:898: sorry, unimplemented: called from here
> >
> > This one I fixed by moving the function before the point of its first use
> > since it's quite small.
>
> Fine. You forgot to include the patch which removes the forward declaration
> though.
>
Whoops, you are right, that's of course no longer needed. Here's a fixed
patch that does that as well.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
diff -up linux-2.6.8-rc2-mm1-orig/drivers/net/wan/dscc4.c linux-2.6.8-rc2-mm1/drivers/net/wan/dscc4.c
--- linux-2.6.8-rc2-mm1-orig/drivers/net/wan/dscc4.c 2004-07-31 13:09:41.000000000 +0200
+++ linux-2.6.8-rc2-mm1/drivers/net/wan/dscc4.c 2004-08-02 00:21:25.000000000 +0200
@@ -351,8 +351,8 @@ struct dscc4_dev_priv {
#endif
/* Functions prototypes */
-static inline void dscc4_rx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
-static inline void dscc4_tx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
+static void dscc4_rx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
+static void dscc4_tx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
static int dscc4_found1(struct pci_dev *, unsigned long ioaddr);
static int dscc4_init_one(struct pci_dev *, const struct pci_device_id *ent);
static int dscc4_open(struct net_device *);
@@ -366,7 +366,6 @@ static void dscc4_tx_timeout(struct net_
static irqreturn_t dscc4_irq(int irq, void *dev_id, struct pt_regs *ptregs);
static int dscc4_hdlc_attach(struct net_device *, unsigned short, unsigned short);
static int dscc4_set_iface(struct dscc4_dev_priv *, struct net_device *);
-static inline int dscc4_set_quartz(struct dscc4_dev_priv *, int);
#ifdef DSCC4_POLLING
static int dscc4_tx_poll(struct dscc4_dev_priv *, struct net_device *);
#endif
@@ -866,6 +865,18 @@ static void dscc4_init_registers(struct
//scc_writel(0x00250008 & ~RxActivate, dpriv, dev, CCR2);
}
+static inline int dscc4_set_quartz(struct dscc4_dev_priv *dpriv, int hz)
+{
+ int ret = 0;
+
+ if ((hz < 0) || (hz > DSCC4_HZ_MAX))
+ ret = -EOPNOTSUPP;
+ else
+ dpriv->pci_priv->xtal_hz = hz;
+
+ return ret;
+}
+
static int dscc4_found1(struct pci_dev *pdev, unsigned long ioaddr)
{
struct dscc4_pci_priv *ppriv;
@@ -1340,18 +1351,6 @@ static int dscc4_ioctl(struct net_device
return ret;
}
-static inline int dscc4_set_quartz(struct dscc4_dev_priv *dpriv, int hz)
-{
- int ret = 0;
-
- if ((hz < 0) || (hz > DSCC4_HZ_MAX))
- ret = -EOPNOTSUPP;
- else
- dpriv->pci_priv->xtal_hz = hz;
-
- return ret;
-}
-
static int dscc4_match(struct thingie *p, int value)
{
int i;
@@ -1531,7 +1530,7 @@ out:
return IRQ_RETVAL(handled);
}
-static inline void dscc4_tx_irq(struct dscc4_pci_priv *ppriv,
+static void dscc4_tx_irq(struct dscc4_pci_priv *ppriv,
struct dscc4_dev_priv *dpriv)
{
struct net_device *dev = dscc4_to_dev(dpriv);
@@ -1700,7 +1699,7 @@ try:
goto try;
}
-static inline void dscc4_rx_irq(struct dscc4_pci_priv *priv,
+static void dscc4_rx_irq(struct dscc4_pci_priv *priv,
struct dscc4_dev_priv *dpriv)
{
struct net_device *dev = dscc4_to_dev(dpriv);
--
Jesper Juhl <juhl-lkml@dif.dk>
prev parent reply other threads:[~2004-08-01 22:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-01 19:24 Jesper Juhl
2004-08-01 21:56 ` Francois Romieu
2004-08-01 22:25 ` Jesper Juhl [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.60.0408020022520.28700@dragon.hygekrogen.localhost \
--to=juhl-lkml@dif.dk \
--cc=akpm@osdl.org \
--cc=bunk@fs.tum.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-net@vger.kernel.org \
--cc=romieu@cogenit.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®