From: Kylene Hall <kjhall@us.ibm.com>
To: akpm@osdl.org
Cc: jgarzik@pobox.com, greg@kroah.com, linux-kernel@vger.kernel.org
Subject: [PATCH 4 of 12] Fix TPM driver -- read return code issue
Date: Thu, 5 May 2005 14:10:46 -0500 (CDT) [thread overview]
Message-ID: <Pine.LNX.4.62.0505051327480.5303@localhost.localdomain> (raw)
Please apply these fixes to the Tpm driver. I am resubmitting the entire
patch set that was orginally sent to LKML on April 27 with the changes
that were requested fixed.
Thanks,
Kylie
On Wed, 9 Mar 2005, Jeff Garzik wrote:
> Greg KH wrote:
<snip>
> > +ssize_t tpm_read(struct file * file, char __user * buf,
> > + size_t size, loff_t * off)
> > +{
> > + struct tpm_chip *chip = file->private_data;
> > + int ret_size = -ENODATA;
> > +
> > + if (atomic_read(&chip->data_pending) != 0) { /* Result available */
> > + down(&chip->timer_manipulation_mutex);
> > + del_singleshot_timer_sync(&chip->user_read_timer);
> > + up(&chip->timer_manipulation_mutex);
> > +
> > + down(&chip->buffer_mutex);
> > +
> > + ret_size = atomic_read(&chip->data_pending);
> > + atomic_set(&chip->data_pending, 0);
> > +
> > + if (ret_size == 0) /* timeout just occurred */
> > + ret_size = -ETIME;
> > + else if (ret_size > 0) { /* relay data */
> > + if (size < ret_size)
> > + ret_size = size;
> > +
> > + if (copy_to_user((void __user *) buf,
> > + chip->data_buffer, ret_size)) {
> > + ret_size = -EFAULT;
> > + }
> > + }
> > + up(&chip->buffer_mutex);
> > + }
> > +
> > + return ret_size;
>
> POSIX violation -- when there is no data available, returning a non-standard
> error is silly
<snip>
The patch below fixes this erroneous return code when no data is
available.
Signed-of-by: Kylene Hall <kjhall@us.ibm.com>
---
--- linux-2.6.12-rc2/drivers/char/tpm/tpm.c 2005-04-21 17:36:59.000000000 -0500
+++ linux-2.6.12-rc2-tpmdd/drivers/char/tpm/tpm.c 2005-04-21 17:57:39.000000000 -0500
@@ -483,29 +483,19 @@ ssize_t tpm_read(struct file * file, cha
size_t size, loff_t * off)
{
struct tpm_chip *chip = file->private_data;
- int ret_size = -ENODATA;
+ int ret_size;
- if (atomic_read(&chip->data_pending) != 0) { /* Result available */
- down(&chip->timer_manipulation_mutex);
- del_singleshot_timer_sync(&chip->user_read_timer);
- up(&chip->timer_manipulation_mutex);
+ del_singleshot_timer_sync(&chip->user_read_timer);
+ ret_size = atomic_read(&chip->data_pending);
+ atomic_set(&chip->data_pending, 0);
+ if (ret_size > 0) { /* relay data */
+ if (size < ret_size)
+ ret_size = size;
down(&chip->buffer_mutex);
-
- ret_size = atomic_read(&chip->data_pending);
- atomic_set(&chip->data_pending, 0);
-
- if (ret_size == 0) /* timeout just occurred */
- ret_size = -ETIME;
- else if (ret_size > 0) { /* relay data */
- if (size < ret_size)
- ret_size = size;
-
- if (copy_to_user((void __user *) buf,
- chip->data_buffer, ret_size)) {
- ret_size = -EFAULT;
- }
- }
+ if (copy_to_user
+ ((void __user *) buf, chip->data_buffer, ret_size))
+ ret_size = -EFAULT;
up(&chip->buffer_mutex);
}
next reply other threads:[~2005-05-05 19:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-05 19:10 Kylene Hall [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-03-10 0:42 [PATCH] Add TPM hardware enablement driver Greg KH
2005-03-10 3:51 ` Jeff Garzik
2005-04-27 22:16 ` [PATCH 4 of 12] Fix TPM driver -- read return code issue Kylene Hall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.62.0505051327480.5303@localhost.localdomain \
--to=kjhall@us.ibm.com \
--cc=akpm@osdl.org \
--cc=greg@kroah.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®