From: Jesper Juhl <juhl-lkml@dif.dk>
To: Luc Saillard <luc@saillard.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH][1/3] pwc-uncompress cleanup - whitespace cleanups.
Date: Mon, 20 Jun 2005 23:11:19 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.62.0506202303050.2369@dragon.hyggekrogen.localhost> (raw)
This patch makes whitespace cleanups to
drivers/usb/media/pwc/pwc-uncompress.c
It makes the following changes:
- lines stay within 80 columns.
- makes testing of pointer vs NULL use the !ptr form consistently, the
file was mixing (!ptr) and (ptr == NULL).
- removes some trailing whitespace.
- tabs vs spaces fixes.
- make if statements match CodingStyle
if (foo) {
/* ... */
} else {
/* ... */
}
- remove empty lines at end of file.
There are no functional changes made by the patch.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
---
drivers/usb/media/pwc/pwc-uncompress.c | 135 ++++++++++++++++-----------------
1 files changed, 67 insertions(+), 68 deletions(-)
--- linux-2.6.12-orig/drivers/usb/media/pwc/pwc-uncompress.c 2005-06-17 21:48:29.000000000 +0200
+++ linux-2.6.12/drivers/usb/media/pwc/pwc-uncompress.c 2005-06-20 22:53:51.000000000 +0200
@@ -38,7 +38,7 @@ int pwc_decompress(struct pwc_device *pd
u16 *src;
u16 *dsty, *dstu, *dstv;
- if (pdev == NULL)
+ if (!pdev)
return -EFAULT;
#if defined(__KERNEL__) && defined(PWC_MAGIC)
if (pdev->magic != PWC_MAGIC) {
@@ -48,7 +48,7 @@ int pwc_decompress(struct pwc_device *pd
#endif
fbuf = pdev->read_frame;
- if (fbuf == NULL)
+ if (!fbuf)
return -EFAULT;
image = pdev->image_ptr[pdev->fill_image];
if (!image)
@@ -57,8 +57,7 @@ int pwc_decompress(struct pwc_device *pd
yuv = fbuf->data + pdev->frame_header_size; /* Skip header */
/* Raw format; that's easy... */
- if (pdev->vpalette == VIDEO_PALETTE_RAW)
- {
+ if (pdev->vpalette == VIDEO_PALETTE_RAW) {
memcpy(image, yuv, pdev->frame_size);
return 0;
}
@@ -69,79 +68,79 @@ int pwc_decompress(struct pwc_device *pd
size). Unfortunately we have to do a bit of byte stuffing
to get the desired output format/size.
*/
- /*
- * We do some byte shuffling here to go from the
- * native format to YUV420P.
- */
- src = (u16 *)yuv;
- n = pdev->view.x * pdev->view.y;
-
- /* offset in Y plane */
- stride = pdev->view.x * pdev->offset.y + pdev->offset.x;
- dsty = (u16 *)(image + stride);
-
- /* offsets in U/V planes */
- stride = pdev->view.x * pdev->offset.y / 4 + pdev->offset.x / 2;
- dstu = (u16 *)(image + n + stride);
- dstv = (u16 *)(image + n + n / 4 + stride);
-
- /* increment after each line */
- stride = (pdev->view.x - pdev->image.x) / 2; /* u16 is 2 bytes */
-
- for (line = 0; line < pdev->image.y; line++) {
- for (col = 0; col < pdev->image.x; col += 4) {
- *dsty++ = *src++;
- *dsty++ = *src++;
- if (line & 1)
- *dstv++ = *src++;
- else
- *dstu++ = *src++;
- }
- dsty += stride;
+
+ /*
+ * We do some byte shuffling here to go from the
+ * native format to YUV420P.
+ */
+ src = (u16 *)yuv;
+ n = pdev->view.x * pdev->view.y;
+
+ /* offset in Y plane */
+ stride = pdev->view.x * pdev->offset.y + pdev->offset.x;
+ dsty = (u16 *)(image + stride);
+
+ /* offsets in U/V planes */
+ stride = pdev->view.x * pdev->offset.y / 4 + pdev->offset.x / 2;
+ dstu = (u16 *)(image + n + stride);
+ dstv = (u16 *)(image + n + n / 4 + stride);
+
+ /* increment after each line */
+ stride = (pdev->view.x - pdev->image.x) / 2; /* u16 = 2 bytes */
+
+ for (line = 0; line < pdev->image.y; line++) {
+ for (col = 0; col < pdev->image.x; col += 4) {
+ *dsty++ = *src++;
+ *dsty++ = *src++;
if (line & 1)
- dstv += (stride >> 1);
+ *dstv++ = *src++;
else
- dstu += (stride >> 1);
+ *dstu++ = *src++;
}
- }
- else {
+ dsty += stride;
+ if (line & 1)
+ dstv += (stride >> 1);
+ else
+ dstu += (stride >> 1);
+ }
+ } else {
/* Compressed; the decompressor routines will write the data
in planar format immediately.
*/
int flags;
- flags = PWCX_FLAG_PLANAR;
- if (pdev->vsize == PSZ_VGA && pdev->vframes == 5 && pdev->vsnapshot)
- {
- printk(KERN_ERR "pwc: Mode Bayer is not supported for now\n");
- flags |= PWCX_FLAG_BAYER;
- return -ENXIO; /* No such device or address: missing decompressor */
- }
-
- switch (pdev->type)
- {
-#if 0
- case 675:
- case 680:
- case 690:
- case 720:
- case 730:
- case 740:
- case 750:
- pwc_dec23_decompress(&pdev->image, &pdev->view, &pdev->offset,
- yuv, image,
- flags,
- pdev->decompress_data, pdev->vbandlength);
- break;
- case 645:
- case 646:
- /* TODO & FIXME */
-#endif
- return -ENXIO; /* No such device or address: missing decompressor */
- break;
+ flags = PWCX_FLAG_PLANAR;
+ if (pdev->vsize == PSZ_VGA &&
+ pdev->vframes == 5 && pdev->vsnapshot) {
+ printk(KERN_ERR
+ "pwc: Mode Bayer is not supported for now\n");
+ flags |= PWCX_FLAG_BAYER;
+ /* No such device or address: missing decompressor */
+ return -ENXIO;
+ }
+
+ switch (pdev->type) {
+#if 0
+ case 675:
+ case 680:
+ case 690:
+ case 720:
+ case 730:
+ case 740:
+ case 750:
+ pwc_dec23_decompress(&pdev->image, &pdev->view,
+ &pdev->offset, yuv, image,
+ flags, pdev->decompress_data,
+ pdev->vbandlength);
+ break;
+ case 645:
+ case 646:
+ /* TODO & FIXME */
+#endif
+ /* No such device or address: missing decompressor */
+ return -ENXIO;
+ break;
}
}
return 0;
}
-
-
next reply other threads:[~2005-06-20 21:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-20 21:11 Jesper Juhl [this message]
2005-06-21 7:29 ` Jörn Engel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.62.0506202303050.2369@dragon.hyggekrogen.localhost \
--to=juhl-lkml@dif.dk \
--cc=jesper.juhl@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luc@saillard.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®