From: Burton Windle <bwindle@fint.org>
To: linux-kernel@vger.kernel.org
Subject: SCSI issue with 2.6.14-rc1
Date: Tue, 13 Sep 2005 12:18:02 -0400 (EDT) [thread overview]
Message-ID: <Pine.LNX.4.63.0509131202170.1684@postal> (raw)
Dell Poweredge 1300, MegaRAID SCSI with hardware RAID1. With 2.6.13,
system was fine, but on 2.6.14-rc1, it sees the RAID array as a 0mb drive
with 1 512-byte sector, and seems to have a bit of a problem mounting /
2.6.13:
megaraid: found 0x8086:0x1960:bus 0:slot 13:func 1
scsi0:Found MegaRAID controller at 0xf8802000, IRQ:185
megaraid: [1.06:1p00] detected 1 logical drives.
megaraid: channel[0] is raid.
megaraid: channel[1] is raid.
scsi0 : LSI Logic MegaRAID 1.06 254 commands 16 targs 5 chans 7 luns
scsi0: scanning scsi channel 0 for logical drives.
Vendor: MegaRAID Model: LD0 RAID1 8568R Rev: 1.06
Type: Direct-Access ANSI SCSI revision: 02
scsi0: scanning scsi channel 4 [P0] for physical devices.
scsi0: scanning scsi channel 5 [P1] for physical devices.
st: Version 20050501, fixed bufsize 32768, s/g segs 256
SCSI device sda: 17547264 512-byte hdwr sectors (8984 MB)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 17547264 512-byte hdwr sectors (8984 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
2.6.14-rc1:
megaraid: found 0x8086:0x1960:bus 0:slot 13:func 1
scsi0:Found MegaRAID controller at 0xf8802000, IRQ:185
megaraid: [1.06:1p00] detected 1 logical drives.
megaraid: channel[0] is raid.
megaraid: channel[1] is raid.
scsi0 : LSI Logic MegaRAID 1.06 254 commands 16 targs 5 chans 7 luns
scsi0: scanning scsi channel 0 for logical drives.
Vendor: MegaRAID Model: LD0 RAID1 8568R Rev: 1.06
Type: Direct-Access ANSI SCSI revision: 02
scsi0: scanning scsi channel 4 [P0] for physical devices.
scsi0: scanning scsi channel 5 [P1] for physical devices.
st: Version 20050830, fixed bufsize 32768, s/g segs 256
sda : sector size 0 reported, assuming 512.
SCSI device sda: 1 512-byte hdwr sectors (0 MB)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
sda: asking for cache data failed
sda: assuming drive cache: write through
sda : sector size 0 reported, assuming 512.
SCSI device sda: 1 512-byte hdwr sectors (0 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Linux RTIX-NM-003 2.6.13 #8 SMP Wed Aug 31 16:38:12 EDT 2005 i686
GNU/Linux
Gnu C 2.95.4
Gnu make 3.80
binutils 2.16.1
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre1
e2fsprogs 1.37
reiserfsprogs line
reiser4progs line
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Procps 3.2.5
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.2.1
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_LOGGING=y
CONFIG_MEGARAID_LEGACY=y
--
Burton Windle bwindle@fint.org
next reply other threads:[~2005-09-13 16:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-13 16:18 Burton Windle [this message]
2005-09-13 21:55 ` Peter Chubb
2005-09-13 22:12 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.63.0509131202170.1684@postal \
--to=bwindle@fint.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®