Re: 2.6.13.4 After increasing RAM, I'm getting Bad page state at prep_new_page

[Ken Moffat <zarniwhoop@ntlworld.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: TEXT/PLAIN; charset=X-UNKNOWN; format=flowed, Size: 1159 bytes --]

On Sat, 22 Oct 2005, Steve Youngs wrote:

>
> I gave memtest86+ a shot, and after about 18 hours it came up with...
>
>  Test:            8
>  Pass:            7
>  Failing Address: 00008072bf0 - 128.1MB
>  Good:            00000000
>  Bad:             00000100
>  Err-Bits:        00000100
>  Count:           1
>
>  >  3GB sounds an awful lot for an athlon - 2x1GB and 2x512MB, I suppose.
>
> 3x1GB
>

  At least the problem showed up, so the load on the power supply is not 
a prime concern.

  If you have the patience, first take out one of the 'good' sticks and 
repeat with 2x1GB.  If that works, it's probable the mobo can't drive 
3x1GB, at least with the chip arrangement on those particular sticks. 
OTOH, if it still fails at that address, perhaps that one stick is 
suspect - in that case try swapping it and retesting.

  Of course, if your manual is unclear about which slot maps where, you 
might have to try permutations of 2 sticks on this approach.  And that's 
before messing with obscure and poorly-explained bios options to control 
the memory timing and drive.  Good Luck!

Ken
-- 
  das eine Mal als Tragödie, das andere Mal als Farce