mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bruce Allen <ballen@gravity.phys.uwm.edu>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>,
	"linux-os (Dick Johnson)" <linux-os@analogic.com>,
	Robert Hancock <hancockr@shaw.ca>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Bruce Allen <bruce.allen@aei.mpg.de>
Subject: Re: ECC and DMA to/from disk controllers
Date: Wed, 12 Sep 2007 22:37:56 -0500 (CDT)	[thread overview]
Message-ID: <Pine.LNX.4.63.0709122215100.16468@trinity.phys.uwm.edu> (raw)
In-Reply-To: <46E5EAB9.9020504@shaw.ca>

Alan, Robert, Dick,

Thank you all for the informed and helpful response!

Alan, I'll pass your comments on to Peter Kelemen.  Not sure if he follows 
LKML.  I think he'll be interested in your characterization of the error 
types.  I'll point him to the thread.  (I think Peter and his 
collaborators are fairly aware of the undetected error rates in standard 
ethernet TCP/IP traffic which as I recall is about one undetected 
single-bit error per 4TB transfered.  I am pretty sure they have ruled 
this out since they have checksums computed after any network transfers.)

Robert, Dick, if I have understood correctly, in response to my specific 
question, RAID controllers on PCI cards will DMA data into memory over a 
PCI bus using one parity bit per 32 data bits for protection.  This does 
provide some protection against errors in the data transfer, but much less 
protection than typical RAM ECC which has one ECC byte for each eight data 
bytes. As I recall, many older motherboards disabled parity on the PCI 
bus, so even this protection may be inactive in many cases. From a few 
minutes of on-line research, I have the impression that PCI-e has better 
ECC protection against address/data errors than PCI but I am not certain.

Thanks again!

Cheers,
 	Bruce

  reply	other threads:[~2007-09-13  3:38 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <fa.qDlrttL6xIyU0yqEbWvsJiyy5tU@ifi.uio.no>
2007-09-11  1:09 ` Robert Hancock
2007-09-13  3:37   ` Bruce Allen [this message]
2007-09-10 12:19 Bruce Allen
2007-09-10 13:54 ` Alan Cox
2007-09-14  9:32   ` KELEMEN Peter
2007-09-10 18:05 ` linux-os (Dick Johnson)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.63.0709122215100.16468@trinity.phys.uwm.edu \
    --to=ballen@gravity.phys.uwm.edu \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=bruce.allen@aei.mpg.de \
    --cc=hancockr@shaw.ca \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-os@analogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®