From: Christoph Lameter <clameter@sgi.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Cedric Le Goater <clg@fr.ibm.com>, linux-kernel@vger.kernel.org
Subject: Re: 2.6.18-rc1-mm1 oops on x86_64
Date: Mon, 10 Jul 2006 09:20:56 -0700 (PDT) [thread overview]
Message-ID: <Pine.LNX.4.64.0607100856540.4491@schroedinger.engr.sgi.com> (raw)
In-Reply-To: <20060709132135.6c786cfb.akpm@osdl.org>
On Sun, 9 Jul 2006, Andrew Morton wrote:
> I dunno, Christoph. I think those patches are going to significantly
> increase the number of works-with-my-config, doesnt-with-yours scenarios.
>
> We're going to hurt ourselves if we do this.
On the other hand we also clean up a lot of strange uses of HIGHMEM. The
more we increase common memory the more we will go to 64 bit
configurationa and at that point we want HIGHMEM to have the least impact
possible.
Hmm... Actually we could leave __GFP_HIGHMEM at it prior value since
GFP_ZONEMASK masks it out anyways. Need to test this though. This may
also make some of the __GFP_DMA32 ifdefs unnecessary.
The advantages of zone reduction are:
1. It shortens traversal times of zones lists and significantly reduces
the amounts of cachelines touched (all the for_each_zone constructs).
See __drain_pages, nr_free_pages, show_free_areas, multiple uses in
swap prefetch, shrink_all_zones, shrink_all_memory,
refresh_cpu_vm_stats.
2. It reduces the number of allocations for pagesets significantly. In an
extreme case (1024p 1024 nodes) we currently have 4*1024*4*1024 = 16
mio allocations of pagesets. The reduction brings that down to
2*1024*2*1024 = 4 mio. The number of pagesets grows by the square.
3. The macro changes allow lots of tests to be performed at compile time
rather than at run time.
4. The changes in mmzone.h allow easy additions/removal of zones should
this become necessary in the future.
5. Clean up the output from /proc/meminfo /proc/vmstat
/sys/devices/system/node/nodeX/meminfo for the !CONFIG_HIGHMEM case.
6. Shrink zones struct through removal of useless counters and shrink
pgdat structure by reducing the size of node_zonelists.
7. The reduces zonelists significantly reduce the work to build
the zonelists at startup time.
next prev parent reply other threads:[~2006-07-10 16:21 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-09 9:11 2.6.18-rc1-mm1 Andrew Morton
2006-07-09 10:20 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-09 10:26 ` 2.6.18-rc1-mm1 Fabio Comolli
2006-07-09 10:45 ` 2.6.18-rc1-mm1 Andrew Morton
2006-07-09 12:37 ` 2.6.18-rc1-mm1 Nick Piggin
2006-07-09 12:55 ` 2.6.18-rc1-mm1 Nick Piggin
2006-07-10 8:50 ` 2.6.18-rc1-mm1 Arjan van de Ven
2006-07-09 10:32 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-09 10:33 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-09 10:52 ` 2.6.18-rc1-mm1 Andrew Morton
2006-07-09 21:06 ` 2.6.18-rc1-mm1 Arjan van de Ven
2006-07-10 7:40 ` 2.6.18-rc1-mm1 Ingo Molnar
2006-07-10 9:22 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-10 9:25 ` 2.6.18-rc1-mm1 Ingo Molnar
2006-07-10 10:01 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-10 10:37 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-10 10:37 ` 2.6.18-rc1-mm1 Ingo Molnar
2006-07-10 10:57 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-09 11:02 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-09 11:13 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-09 12:10 ` 2.6.18-rc1-mm1 Andrew Morton
2006-07-09 13:19 ` 2.6.18-rc1-mm1 Michal Piotrowski
2006-07-09 11:22 ` 2.6.18-rc1-mm1 Reuben Farrelly
2006-07-09 12:22 ` 2.6.18-rc1-mm1 Andrew Morton
2006-07-09 12:56 ` 2.6.18-rc1-mm1 Alan Cox
2006-07-09 14:21 ` 2.6.18-rc1-mm1 Reuben Farrelly
2006-07-09 16:29 ` 2.6.18-rc1-mm1 Jeff Garzik
2006-07-09 18:35 ` 2.6.18-rc1-mm1 Andi Kleen
2006-07-11 19:37 ` 2.6.18-rc1-mm1 Greg KH
2006-07-09 21:10 ` 2.6.18-rc1-mm1 john stultz
2006-07-09 17:33 ` 2.6.18-rc1-mm1 Randy.Dunlap
2006-07-09 21:40 ` 2.6.18-rc1-mm1 Andrew Morton
2006-07-10 4:56 ` 2.6.18-rc1-mm1 Randy.Dunlap
2006-07-10 5:01 ` 2.6.18-rc1-mm1 Andrew Morton
2006-07-10 5:35 ` 2.6.18-rc1-mm1 Randy.Dunlap
2006-07-09 11:49 ` 2.6.18-rc1-mm1 fails on amd64 (smp_call_function_single) Gregoire Favre
2006-07-09 13:00 ` Adrian Bunk
2006-07-09 14:11 ` Gregoire Favre
2006-07-09 20:39 ` Rafael J. Wysocki
2006-07-09 21:03 ` Andrew Morton
2006-07-09 22:37 ` Rafael J. Wysocki
2006-07-09 22:44 ` Andrew Morton
2006-07-10 0:08 ` Andi Kleen
2006-07-09 12:46 ` modpost error about size inconsitency Sam Ravnborg
2006-07-09 12:49 ` Sam Ravnborg
2006-07-09 14:28 ` [-mm patch] fix MODULES=n compile Adrian Bunk
2006-07-09 14:28 ` [-mm patch] proper prototype for drivers/scsi/arcmsr/arcmsr_attr.c:arcmsr_free_sysfs_attr() Adrian Bunk
2006-07-09 16:19 ` 2.6.18-rc1-mm1 oops on x86_64 Cedric Le Goater
2006-07-09 20:21 ` Andrew Morton
2006-07-09 20:35 ` Rafael J. Wysocki
2006-07-09 20:59 ` Andrew Morton
2006-07-09 21:11 ` Rafael J. Wysocki
2006-07-10 15:54 ` Christoph Lameter
2006-07-10 17:22 ` Christoph Lameter
2006-07-10 16:20 ` Christoph Lameter [this message]
2006-07-10 17:38 ` Christoph Lameter
2006-07-10 20:27 ` Cedric Le Goater
2006-07-10 20:32 ` Rafael J. Wysocki
2006-07-09 17:28 ` 2.6.18-rc1-mm1 Dominik Karall
2006-07-09 20:24 ` 2.6.18-rc1-mm1 Andrew Morton
2006-07-10 7:11 ` 2.6.18-rc1-mm1 Mauro Carvalho Chehab
2006-07-10 22:25 ` 2.6.18-rc1-mm1 Dominik Karall
2006-07-13 22:10 ` 2.6.18-rc1-mm1 Dominik Karall
2006-07-09 17:53 ` [-mm patch] make arch/i386/kernel/cpu/cpufreq/longhaul.c:longhaul_walk_callback() static Adrian Bunk
2006-07-09 17:53 ` [-mm patch] kernel/rcutorture.c: make code static Adrian Bunk
2006-07-10 14:58 ` Paul E. McKenney
2006-07-09 18:22 ` 2.6.18-rc1-mm1: /sys/class/net/ethN becoming symlink befuddled /sbin/ifup Mike Galbraith
2006-07-09 19:01 ` Mike Galbraith
2006-07-09 20:51 ` Andrew Morton
2006-07-10 0:32 ` David Miller
2006-07-11 22:59 ` Greg KH
2006-07-12 6:29 ` Kay Sievers
2006-07-10 1:29 ` Jeremy Fitzhardinge
2006-07-10 5:01 ` Mike Galbraith
2006-07-09 19:24 ` 2.6.18-rc1-mm1 Valdis.Kletnieks
2006-07-09 21:11 ` 2.6.18-rc1-mm1 john stultz
2006-07-09 21:37 ` 2.6.18-rc1-mm1 inconsistent lock state in netpoll_send_skb Laurent Riffard
2006-07-10 8:40 ` Arjan van de Ven
2006-07-10 19:06 ` Laurent Riffard
2006-07-11 8:40 ` Arjan van de Ven
2006-07-11 22:00 ` Laurent Riffard
2006-07-09 21:47 ` 2.6.18-rc1-mm1 reiser4 module calls generic_file_read Laurent Riffard
2006-07-10 13:37 ` Edward Shishkin
2006-07-09 23:32 ` [-mm patch] fs/ocfs2/ioctl.c should #include "ioctl.h" Adrian Bunk
2006-07-10 0:33 ` 2.6.18-rc1-mm1 J.A. Magallón
2006-07-10 10:02 ` 2.6.18-rc1-mm1 Alan Cox
2006-07-10 1:10 ` 2.6.18-rc1-mm1 Brice Goglin
2006-07-10 15:22 ` 2.6.18-rc1-mm1 Rafael J. Wysocki
2006-07-10 18:33 ` [-mm patch] include/scsi/libsas.h should #include <linux/scatterlist.h> Adrian Bunk
2006-07-10 19:29 ` [PATCH -mm] sysfs_remove_bin_file: no return value, no check needed Randy.Dunlap
2006-07-10 21:43 ` Andrew Morton
2006-07-11 0:36 ` Randy.Dunlap
2006-07-11 6:05 ` [PATCH -mm] sysfs_remove_bin_file: no return value, dump_stack on error Randy.Dunlap
2006-07-10 22:21 ` 2.6.18-rc1-mm1 J.A. Magallón
2006-07-11 12:47 ` [-mm patch] MICROCODE should select FW_LOADER Adrian Bunk
2006-07-11 12:52 ` 2.6.18-rc1-mm1: drivers/ide/pci/jmicron.c warning Adrian Bunk
2006-07-11 14:02 ` Alan Cox
2006-07-11 22:10 ` Adrian Bunk
2006-07-11 23:10 ` Alan Cox
2006-07-11 23:23 ` Andrew Morton
2006-07-11 23:27 ` Adrian Bunk
2006-07-12 20:45 ` 2.6.18-rc1-mm1 Reuben Farrelly
2006-07-13 20:18 ` [-mm patch] DEBUG_SHIRQ should depend on DEBUG_KERNEL Adrian Bunk
2006-07-15 13:41 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0607100856540.4491@schroedinger.engr.sgi.com \
--to=clameter@sgi.com \
--cc=akpm@osdl.org \
--cc=clg@fr.ibm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®