From: Justin Piszcz <jpiszcz@lucidpixels.com>
To: Johan Groth <johan.groth@linux-grotto.org.uk>
Cc: Mark Lord <lkml@rtr.ca>, linux-kernel@vger.kernel.org
Subject: Re: Scsi errors with Megaraid 300-8x
Date: Wed, 23 Aug 2006 11:45:51 -0400 (EDT) [thread overview]
Message-ID: <Pine.LNX.4.64.0608231145290.15031@p34.internal.lan> (raw)
In-Reply-To: <44EC775C.7040003@linux-grotto.org.uk>
On Wed, 23 Aug 2006, Johan Groth wrote:
> Mark Lord wrote:
>> Johan Groth wrote:
>
> [snip]
>
>> Basically, given an I/O request for 200 sectors, with a bad sector
>> in the middle at number 100, what SCSI will often do is fail sectors
>> number 1 through 100, one at a time, retrying the entire remainder of
>> the request after each attempt. This takes hours, and results in no
>> data for the first 99 good sectors.
>
> So what you are saying is that after the move to a new box and a new mobo a
> sector has gone bad on that raid slice? Weird, as I was very careful this
> those drives when I moved them.
>
> I mean, the raid controller is the same, the cpus are the same, just more of
> them, the pci-x bus the same so I didn't expect any problems at all.
>
> I was also under the impression that SATA raid controllers work like SCSI
> raid controllers in the way that if a bad sector is encountered the
> controller moves what it can and the mark the sector as bad. I might be very
> wrong about that, though.
>
> However, if I have a bad sector I would like to have that one marked as bad
> so the kernel never tries to read it again. Any suggestions how I do that. I
> assume I have to boot something like Knoppix as sda is my system disk.
>
> Regards,
> Johan
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Run badblocks in r+w mode on the bad disk and it will force the disk to
re-allocate the bad sector if it can.
Justin.
next prev parent reply other threads:[~2006-08-23 15:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-22 14:45 Johan Groth
2006-08-23 15:27 ` Mark Lord
2006-08-23 15:42 ` Johan Groth
2006-08-23 15:45 ` Justin Piszcz [this message]
2006-08-23 15:48 ` Johan Groth
2006-08-23 15:53 ` Justin Piszcz
2006-08-23 15:57 ` Johan Groth
2006-08-23 15:59 ` Justin Piszcz
2006-08-24 14:48 ` Mark Lord
2006-08-24 15:09 ` Johan Groth
2006-08-24 16:57 ` Mark Lord
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0608231145290.15031@p34.internal.lan \
--to=jpiszcz@lucidpixels.com \
--cc=johan.groth@linux-grotto.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@rtr.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®