From: Justin Piszcz <jpiszcz@lucidpixels.com>
To: "Williams, Dan J" <dan.j.williams@intel.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>,
neilb@suse.de, akpm@linux-foundation.org, "Leech,
Christopher" <christopher.leech@intel.com>,
linux-kernel@vger.kernel.org, linux-raid@vger.kernel.org
Subject: RE: [PATCH 00/16] raid acceleration and asynchronous offload api for 2.6.22
Date: Wed, 2 May 2007 11:55:18 -0400 (EDT) [thread overview]
Message-ID: <Pine.LNX.4.64.0705021154410.25382@p34.internal.lan> (raw)
In-Reply-To: <0C7297FA1D2D244A9C7F6959C0BF1E5201CA8DF4@azsmsx413.amr.corp.intel.com>
On Wed, 2 May 2007, Williams, Dan J wrote:
>> From: Nick Piggin [mailto:nickpiggin@yahoo.com.au]
>>> I am pleased to release this latest spin of the raid acceleration
>>> patches for merge consideration. This release aims to address all
>>> pending review items including MD bug fixes and async_tx api changes
>>> from Neil, and concerns on channel management from Chris and others.
>>>
>>> Data integrity tests using home grown scripts and 'iozone -V' are
>>> passing. I am open to suggestions for additional testing criteria.
>>
>> Do you have performance numbers?
>>
> Patch #4 outlines the throughput gains as reported by tiobench. 20-30%
> for sequential writes, and 40-55% for degraded reads.
>
> Here are some recent screen captures of a resync operation with and
> without offload, this is on an iop13xx platform:
>
> mdadm --create /dev/md0 /dev/sd[abc] missing -n 4 -l 5
> mdadm --add /dev/md0 /dev/sdd
>
> ---
> CONFIG_DMA_ENGINE = n
>
> top - 00:01:39 up 1 min, 1 user, load average: 0.77, 0.20, 0.06
> Tasks: 50 total, 1 running, 49 sleeping, 0 stopped, 0 zombie
> Cpu(s): 0.3% us, 47.4% sy, 0.0% ni, 49.0% id, 0.0% wa, 0.7% hi,
> 2.6% si
> Mem: 2074836k total, 36276k used, 2038560k free, 0k buffers
> Swap: 0k total, 0k used, 0k free, 16560k cached
>
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 1307 root 11 -5 0 0 0 S 48.0 0.0 0:14.14 md0_raid5
> 1319 root 15 0 2260 1052 868 R 0.3 0.1 0:00.12 top
>
> iq81340mc:~# cat /proc/mdstat
> Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
> md0 : active raid5 sda[0] sdd[4] sdc[2] sdb[1]
> 468872448 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_]
> [>....................] recovery = 0.7% (1104000/156290816)
> finish=108.1min speed=23919K/sec
>
> ---
> CONFIG_DMA_ENGINE = y && CONFIG_INTEL_IOP_ADMA = y
>
> top - 00:06:21 up 6 min, 1 user, load average: 1.10, 0.68, 0.29
> Tasks: 51 total, 1 running, 50 sleeping, 0 stopped, 0 zombie
> Cpu(s): 0.5% us, 7.5% sy, 0.1% ni, 85.8% id, 1.9% wa, 0.5% hi,
> 3.5% si
> Mem: 2074776k total, 40520k used, 2034256k free, 0k buffers
> Swap: 0k total, 0k used, 0k free, 19448k cached
>
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 1354 root 10 -5 0 0 0 S 11.6 0.0 0:29.32 md0_raid5
> 1491 root 18 0 2256 964 780 R 1.9 0.0 0:00.03 top
>
> iq81340mc:/mnt# cat /proc/mdstat
> Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
> md0 : active raid5 sdd[4] sdc[2] sdb[1] sda[0]
> 468872448 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_]
> [>....................] recovery = 3.5% (5474916/156290816)
> finish=52.2min speed=48061K/sec
>
> Some older iozone data is available here:
> https://sourceforge.net/project/showfiles.php?group_id=115074&package_id
> =203776
>
> Regards,
> Dan
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
I have not been following this closely, must you have an
CONFIG_INTEL_IOP_ADMA piece of hardware and/or chipset to use this
feature or can regular desktop users take hold of it as well?
Justin.
next prev parent reply other threads:[~2007-05-02 15:56 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-02 6:14 Dan Williams
2007-05-02 6:15 ` [PATCH 01/16] dmaengine: add base support for the async_tx api Dan Williams
2007-05-02 6:15 ` [PATCH 02/16] dmaengine: move channel management to the client Dan Williams
2007-05-02 6:16 ` [PATCH 03/16] ARM: Add drivers/dma to arch/arm/Kconfig Dan Williams
2007-05-02 6:16 ` [PATCH 04/16] dmaengine: add the async_tx api Dan Williams
2007-05-02 6:17 ` [PATCH 05/16] md: add raid5_run_ops and support routines Dan Williams
2007-05-02 6:17 ` [PATCH 06/16] md: use raid5_run_ops for stripe cache operations Dan Williams
2007-05-02 6:18 ` [PATCH 07/16] md: move write operations to raid5_run_ops Dan Williams
2007-05-02 6:18 ` [PATCH 08/16] md: move raid5 compute block " Dan Williams
2007-05-02 6:19 ` [PATCH 09/16] md: move raid5 parity checks " Dan Williams
2007-05-02 6:19 ` [PATCH 10/16] md: satisfy raid5 read requests via raid5_run_ops Dan Williams
2007-05-02 6:20 ` [PATCH 11/16] md: use async_tx and raid5_run_ops for raid5 expansion operations Dan Williams
2007-05-02 6:20 ` [PATCH 12/16] md: move raid5 io requests to raid5_run_ops Dan Williams
2007-05-02 6:21 ` [PATCH 13/16] md: remove raid5 compute_block and compute_parity5 Dan Williams
2007-05-02 6:21 ` [PATCH 14/16] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines Dan Williams
2007-05-02 6:22 ` [PATCH 15/16] iop13xx: Surface the iop13xx adma units to the iop-adma driver Dan Williams
2007-05-02 6:22 ` [PATCH 16/16] iop3xx: Surface the iop3xx DMA and AAU " Dan Williams
2007-05-02 6:55 ` [PATCH 00/16] raid acceleration and asynchronous offload api for 2.6.22 Nick Piggin
2007-05-02 15:45 ` Williams, Dan J
2007-05-02 15:55 ` Justin Piszcz [this message]
2007-05-02 16:17 ` Williams, Dan J
2007-05-02 16:19 ` Justin Piszcz
2007-05-02 16:36 ` Dagfinn Ilmari Mannsåker
2007-05-02 16:42 ` Williams, Dan J
2007-05-10 14:12 Tomasz Chmielewski
2007-05-10 15:32 ` Tomasz Chmielewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0705021154410.25382@p34.internal.lan \
--to=jpiszcz@lucidpixels.com \
--cc=akpm@linux-foundation.org \
--cc=christopher.leech@intel.com \
--cc=dan.j.williams@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
--cc=nickpiggin@yahoo.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®