From: Holger Kiehl <Holger.Kiehl@dwd.de>
To: linux-ext4@vger.kernel.org
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Performance of ext4
Date: Wed, 11 Jun 2008 08:02:32 +0000 (GMT) [thread overview]
Message-ID: <Pine.LNX.4.64.0806110801370.19793@diagnostix.dwd.de> (raw)
Hello
Doing some performance test between ext3 and ext4 I noticed that ext4
is not much faster or in some cases slower then ext3. Two years ago when
I tested ext4 it was a lot faster then ext3 (see my mail:
http://lkml.org/lkml/2006/6/6/65). Doing some simple tests with bonnie++
I got the following results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
ext3(2 years ago)16G 38621 98 194816 94 87776 49 37921 92 239128 54 1402 5
16G 47000 99 194276 94 89232 49 38628 92 240539 55 1399 5
16G 45873 98 178195 90 89726 50 38482 92 240490 55 1381 4
ext3 (now) 16G 51501 97 210601 91 100479 32 55528 98 301589 44 1198 5
16G 52702 98 215540 94 99339 32 55376 97 300933 44 1159 4
16G 52426 99 212584 94 99091 31 55656 98 301669 44 1160 4
ext4(2 years ago)16G 59223 91 264155 45 111459 36 57313 99 317944 63 1478 7
16G 58814 92 276803 47 110418 36 57105 99 317534 65 1525 5
16G 58299 92 274523 48 110290 36 56723 99 318839 65 1502 4
ext4 (now) 16G 52965 98 224199 89 108440 32 56389 99 303792 42 1526 4
16G 52792 98 223980 92 107685 32 56350 98 303066 42 1532 4
16G 52994 98 222354 92 107802 32 56386 99 303727 41 1455 4
For this system the write performance is the most important factor and one
can see today ext4 is marginally faster then ext3. But 2 years ago ext4 was
a lot faster (~270MB against ~223MB).
Using my own benchmark afdbench where many process copy thousands of small
files around the results are as follows:
For ext3: 5449.76 files per second 15.58 MiB/s
For ext4: 5162.16 files per second 15.48 MiB/s
So in this test ext4 is a bit slower then ext3. Since afdbench has seen
considerable changes, one cannot compare these results with those 2 years
ago. But 2 years ago ext4 was 12% faster then ext3.
Test where done with kernel 2.6.25.4 and file system where created as follows:
ext3: mke2fs -b 4096 -m 0 -O dir_index,large_file,filetype,has_journal,sparse_super -j /dev/md7
ext4: mke2fs -b 4096 -E test_fs -m 0 -O dir_index,large_file,filetype,has_journal,sparse_super -j /dev/md7
And both where mounted with the following options:
noatime,nodiratime,commit=15
2 years ago I used 2.6.16.8 but the hardware is still the same. So what has
happened with the performance of ext4? I noticed that 2 years ago I could
use extents+mballoc+delalloc, now there is only extents+mballoc in the
current kernels. Could delalloc make the big difference? I saw that
in Andrew Morton mm tree delalloc is included. Unfortunately when I tried using
2.6.26-rc2-mm1 a sync would never return and there where lot of other
odd things, so I could not do any tests with delalloc.
So any idea what I am doing wrong or what I could do to improve those numbers?
Please CC me since I am not subscribed to the list.
Thanks,
Holger
next reply other threads:[~2008-06-11 8:02 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-11 8:02 Holger Kiehl [this message]
2008-06-11 10:59 ` Aneesh Kumar K.V
2008-06-11 19:58 ` Holger Kiehl
2008-06-11 20:17 ` Nick Dokos
2008-06-12 9:02 ` Holger Kiehl
2008-06-12 10:58 ` Solofo.Ramangalahy
2008-06-12 12:00 ` Holger Kiehl
2008-06-12 13:19 ` Theodore Tso
2008-06-12 14:07 ` Holger Kiehl
2008-06-12 18:06 ` Aneesh Kumar K.V
2008-06-12 19:50 ` Holger Kiehl
2008-06-13 8:05 ` Holger Kiehl
2008-06-16 17:54 ` Jan Kara
2008-06-16 18:13 ` Aneesh Kumar K.V
2008-06-17 11:42 ` Holger Kiehl
2008-06-18 5:58 ` Holger Kiehl
2008-06-19 6:58 ` Andreas Dilger
2008-06-19 11:09 ` Theodore Tso
2008-06-19 15:04 ` Holger Kiehl
2008-07-07 13:13 ` Holger Kiehl
2008-07-10 8:11 ` Holger Kiehl
2008-06-19 15:56 ` Theodore Tso
2008-06-19 16:41 ` Eric Sandeen
2008-06-19 17:42 ` Theodore Tso
2008-06-19 19:51 ` Mingming
2008-06-20 8:32 ` Holger Kiehl
2008-06-20 8:59 ` Theodore Tso
2008-06-20 9:21 ` Holger Kiehl
2008-06-23 17:45 ` Aneesh Kumar K.V
2008-06-24 0:31 ` Mingming
2008-06-24 3:07 ` Aneesh Kumar K.V
2008-06-24 3:28 ` Aneesh Kumar K.V
2008-06-24 3:33 ` Aneesh Kumar K.V
2008-06-24 21:12 ` Holger Kiehl
2008-06-24 22:58 ` Mingming
2008-06-25 9:09 ` Holger Kiehl
2008-06-26 0:46 ` Mingming
2008-06-27 9:14 ` Aneesh Kumar K.V
2008-06-27 9:49 ` Aneesh Kumar K.V
2008-06-27 10:00 ` Jan Kara
2008-06-27 17:35 ` Aneesh Kumar K.V
2008-06-24 17:58 ` Mingming
2008-06-24 12:57 ` Holger Kiehl
2008-06-23 20:55 ` Andreas Dilger
2008-06-20 8:09 ` Holger Kiehl
2008-06-21 15:02 ` Holger Kiehl
2008-06-11 13:54 ` Theodore Tso
2008-06-11 20:21 ` Holger Kiehl
2008-06-12 1:35 ` Theodore Tso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0806110801370.19793@diagnostix.dwd.de \
--to=holger.kiehl@dwd.de \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®