Re: [PATCH] Add btgpio driver

["Randy.Dunlap" <rdunlap@xenotime.net>]

On Wed, 2 Jul 2008, Domenico Andreoli wrote:

> On Tue, Jul 01, 2008 at 03:04:15AM +0200, Domenico Andreoli wrote:
> > On Tue, Jul 01, 2008 at 02:06:38AM +0200, Michael Buesch wrote:
> > > This adds the btgpio driver.
> > > The purpose of the btgpio driver is to export all of the 24 GPIO pins
> > > available on Brooktree 8xx chips to the kernel GPIO infrastructure.
> > > 
> > > This makes it possible to use a physically modified BT8xx card as
> > > cheap digital GPIO card.
> > > 
> > > Signed-off-by: Michael Buesch <mb@bu3sch.de>
> > 
> > How one is supposed to test this driver? I am unable to switch on
> > the GIPO lib support in my config. I tried also allyesconfig but no
> > trace of gpio lib stuff.
> 
> Really, GPIO menu is no present anywhere. While searching for GPIO
> finds stuff, I am unable to locate and select it. I am using 2.6.26-rc8.

For what $ARCH?  GPIO menu says this:

config HAVE_GPIO_LIB
	bool
	help
	  Platforms select gpiolib if they use this infrastructure
	  for all their GPIOs, usually starting with ones integrated
	  into SOC processors.

and then the arch-es that select HAVE_GPIO_LIB are these:

./arch/powerpc/platforms/52xx/Kconfig:50:       select HAVE_GPIO_LIB
./arch/mips/Kconfig:803:        select HAVE_GPIO_LIB
./arch/avr32/Kconfig:90:        select HAVE_GPIO_LIB
./arch/avr32/Kconfig.orig:85:   select HAVE_GPIO_LIB
./arch/arm/Kconfig:257: select HAVE_GPIO_LIB
./arch/arm/Kconfig:396: select HAVE_GPIO_LIB
./arch/arm/Kconfig:426: select HAVE_GPIO_LIB
./arch/arm/Kconfig:466: select HAVE_GPIO_LIB
./arch/arm/Kconfig.orig:401:    select HAVE_GPIO_LIB

so are you using one of those arches?

-- 
~Randy