Re: [PATCH next] ide: fix PowerMac bootup oops

[Hugh Dickins <hugh.dickins@tiscali.co.uk>]

Hi Bart,

On Mon, 8 Jun 2009, Bartlomiej Zolnierkiewicz wrote:
> 
> After auditing some other host drivers I see that drive->id can be used
> also directly in ->set_pio_mode methods..
> 
> Could you please instead try moving ->id allocation from probe_for_drive()
> to ide_port_alloc_devices() (this would fix all such issues for good) and
> verify that it also fixes the oops?

Okay, that makes sense: here's a patch which fixes the oops that way;
but it didn't work first time - see save_id!  I'm not entirely happy
with the memsetting, as I comment in the patch, but I don't really
know what reuse these get: please check the decisions I made,
you may well want to change it around a bit.


[PATCH next] ide: fix PowerMac bootup oops

PowerMac bootup with CONFIG_IDE=y oopses in ide_pio_cycle_time():
because "ide: try to use PIO Mode 0 during probe if possible" causes
pmac_ide_set_pio_mode() to be called before drive->id has been set.

Bart points out other places which now need drive->id set earlier,
so follow his advice to allocate it in ide_port_alloc_devices()
(using kzalloc_node, without error message, as when allocating drive).

But memset id in probe_for_drive() when it might be being reused -
or would it be better to memset it wherever it used to be kfreed?

Fixed in passing: ide_host_alloc() was missing ide_port_free_devices()
from an error path.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
---

 drivers/ide/ide-probe.c |   47 ++++++++++++++++----------------------
 1 file changed, 21 insertions(+), 26 deletions(-)

--- lnext/drivers/ide/ide-probe.c	2009-06-03 11:45:13.000000000 +0100
+++ linux/drivers/ide/ide-probe.c	2009-06-09 12:03:55.000000000 +0100
@@ -465,23 +465,9 @@ static u8 probe_for_drive(ide_drive_t *d
 	int rc;
 	u8 cmd;
 
-	/*
-	 *	In order to keep things simple we have an id
-	 *	block for all drives at all times. If the device
-	 *	is pre ATA or refuses ATA/ATAPI identify we
-	 *	will add faked data to this.
-	 *
-	 *	Also note that 0 everywhere means "can't do X"
-	 */
- 
 	drive->dev_flags &= ~IDE_DFLAG_ID_READ;
 
-	drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
-	if (drive->id == NULL) {
-		printk(KERN_ERR "ide: out of memory for id data.\n");
-		return 0;
-	}
-
+	memset(drive->id, 0, SECTOR_SIZE);
 	m = (char *)&drive->id[ATA_ID_PROD];
 	strcpy(m, "UNKNOWN");
 
@@ -497,7 +483,7 @@ static u8 probe_for_drive(ide_drive_t *d
 		}
 
 		if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-			goto out_free;
+			return 0;
 
 		/* identification failed? */
 		if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -521,7 +507,7 @@ static u8 probe_for_drive(ide_drive_t *d
 	}
 
 	if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-		goto out_free;
+		return 0;
 
 	/* The drive wasn't being helpful. Add generic info only */
 	if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -535,9 +521,6 @@ static u8 probe_for_drive(ide_drive_t *d
 	}
 
 	return 1;
-out_free:
-	kfree(drive->id);
-	return 0;
 }
 
 static void hwif_release_dev(struct device *dev)
@@ -817,8 +800,6 @@ static int ide_port_setup_devices(ide_hw
 		if (ide_init_queue(drive)) {
 			printk(KERN_ERR "ide: failed to init %s\n",
 					drive->name);
-			kfree(drive->id);
-			drive->id = NULL;
 			drive->dev_flags &= ~IDE_DFLAG_PRESENT;
 			continue;
 		}
@@ -947,9 +928,6 @@ static void drive_release_dev (struct de
 	blk_cleanup_queue(drive->queue);
 	drive->queue = NULL;
 
-	kfree(drive->id);
-	drive->id = NULL;
-
 	drive->dev_flags &= ~IDE_DFLAG_PRESENT;
 
 	complete(&drive->gendev_rel_comp);
@@ -1132,8 +1110,10 @@ static void ide_port_init_devices_data(i
 
 	ide_port_for_each_dev(i, drive, hwif) {
 		u8 j = (hwif->index * MAX_DRIVES) + i;
+		u16 *saved_id = drive->id;
 
 		memset(drive, 0, sizeof(*drive));
+		drive->id = saved_id;
 
 		drive->media			= ide_disk;
 		drive->select			= (i << 4) | ATA_DEVICE_OBS;
@@ -1240,8 +1220,10 @@ static void ide_port_free_devices(ide_hw
 	ide_drive_t *drive;
 	int i;
 
-	ide_port_for_each_dev(i, drive, hwif)
+	ide_port_for_each_dev(i, drive, hwif) {
+		kfree(drive->id);
 		kfree(drive);
+	}
 }
 
 static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
@@ -1255,6 +1237,18 @@ static int ide_port_alloc_devices(ide_hw
 		if (drive == NULL)
 			goto out_nomem;
 
+		/*
+		 * In order to keep things simple we have an id
+		 * block for all drives at all times. If the device
+		 * is pre ATA or refuses ATA/ATAPI identify we
+		 * will add faked data to this.
+		 *
+		 * Also note that 0 everywhere means "can't do X"
+		 */
+		drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node);
+		if (drive->id == NULL)
+			goto out_nomem;
+
 		hwif->devices[i] = drive;
 	}
 	return 0;
@@ -1296,6 +1290,7 @@ struct ide_host *ide_host_alloc(const st
 		if (idx < 0) {
 			printk(KERN_ERR "%s: no free slot for interface\n",
 					d ? d->name : "ide");
+			ide_port_free_devices(hwif);
 			kfree(hwif);
 			continue;
 		}