From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
To: Josh Wu <josh.wu@atmel.com>
Cc: linux-media@vger.kernel.org, plagnioj@jcrosoft.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, nicolas.ferre@atmel.com,
s.nawrocki@samsung.com
Subject: Re: [PATCH v3 1/2][media] Add code to enable/disable ISI_MCK clock.
Date: Fri, 30 Sep 2011 11:14:31 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.64.1109301105480.1888@axis700.grange> (raw)
In-Reply-To: <1316664661-11383-1-git-send-email-josh.wu@atmel.com>
On Thu, 22 Sep 2011, Josh Wu wrote:
> This patch add code to enable/disable ISI_MCK clock when add/remove soc
> camera device.it also set ISI_MCK frequence before using it.
Ok, the fact, that noone more comments on the clk API use in this patch
confirms my impression, that it's now mostly done right:-) But, as I
mentioned in my reply to patch 2/2, I think, you shouldn't be getting and
manipulating isi_mck unconditionally in this driver.
Actually, I think, this code
+ /* ISI_MCK, which is provided by programmable clock(PCK1) */
+ CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", &pck1),
in your other patch (sorry for cross-referencing), isn't quite correct.
This is not an ISI specific clock, this is a PCK1 clock, which might as
well be used for ISI, but can also be used for a different purpose. At
least this doesn't seem a generic sam9g45 feature to me. You, probably,
want to move this clock lookup registration to your board (sam9g45ek)
file, which does indeed wire PCK1 to the camera sensor, installed on it.
Thanks
Guennadi
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
> ---
> drivers/media/video/atmel-isi.c | 30 ++++++++++++++++++++++++++++--
> include/media/atmel-isi.h | 2 ++
> 2 files changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
> index 7b89f00..888234a 100644
> --- a/drivers/media/video/atmel-isi.c
> +++ b/drivers/media/video/atmel-isi.c
> @@ -90,7 +90,10 @@ struct atmel_isi {
> struct isi_dma_desc dma_desc[MAX_BUFFER_NUM];
>
> struct completion complete;
> + /* ISI peripherial clock */
> struct clk *pclk;
> + /* ISI_MCK, provided by Programmable clock */
> + struct clk *mck;
> unsigned int irq;
>
> struct isi_platform_data *pdata;
> @@ -763,6 +766,12 @@ static int isi_camera_add_device(struct soc_camera_device *icd)
> if (ret)
> return ret;
>
> + ret = clk_enable(isi->mck);
> + if (ret) {
> + clk_disable(isi->pclk);
> + return ret;
> + }
> +
> isi->icd = icd;
> dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n",
> icd->devnum);
> @@ -776,6 +785,7 @@ static void isi_camera_remove_device(struct soc_camera_device *icd)
>
> BUG_ON(icd != isi->icd);
>
> + clk_disable(isi->mck);
> clk_disable(isi->pclk);
> isi->icd = NULL;
>
> @@ -897,6 +907,7 @@ static int __devexit atmel_isi_remove(struct platform_device *pdev)
> isi->fb_descriptors_phys);
>
> iounmap(isi->regs);
> + clk_put(isi->mck);
> clk_put(isi->pclk);
> kfree(isi);
>
> @@ -915,7 +926,7 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
> struct isi_platform_data *pdata;
>
> pdata = dev->platform_data;
> - if (!pdata || !pdata->data_width_flags) {
> + if (!pdata || !pdata->data_width_flags || !pdata->isi_mck_hz) {
> dev_err(&pdev->dev,
> "No config available for Atmel ISI\n");
> return -EINVAL;
> @@ -944,6 +955,19 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
> INIT_LIST_HEAD(&isi->video_buffer_list);
> INIT_LIST_HEAD(&isi->dma_desc_head);
>
> + /* Get ISI_MCK, which is provided by Programmable clock */
> + isi->mck = clk_get(dev, "isi_mck");
> + if (IS_ERR(isi->mck)) {
> + dev_err(dev, "Failed to get isi_mck\n");
> + ret = PTR_ERR(isi->mck);
> + goto err_alloc_descriptors;
> + }
> +
> + /* Set ISI_MCK's frequency, it should be faster than pixel clock */
> + ret = clk_set_rate(isi->mck, pdata->isi_mck_hz);
> + if (ret < 0)
> + goto err_set_mck_rate;
> +
> isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
> sizeof(struct fbd) * MAX_BUFFER_NUM,
> &isi->fb_descriptors_phys,
> @@ -951,7 +975,7 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
> if (!isi->p_fb_descriptors) {
> ret = -ENOMEM;
> dev_err(&pdev->dev, "Can't allocate descriptors!\n");
> - goto err_alloc_descriptors;
> + goto err_set_mck_rate;
> }
>
> for (i = 0; i < MAX_BUFFER_NUM; i++) {
> @@ -1013,6 +1037,8 @@ err_alloc_ctx:
> sizeof(struct fbd) * MAX_BUFFER_NUM,
> isi->p_fb_descriptors,
> isi->fb_descriptors_phys);
> +err_set_mck_rate:
> + clk_put(isi->mck);
> err_alloc_descriptors:
> kfree(isi);
> err_alloc_isi:
> diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
> index 26cece5..a0229a6 100644
> --- a/include/media/atmel-isi.h
> +++ b/include/media/atmel-isi.h
> @@ -114,6 +114,8 @@ struct isi_platform_data {
> u32 data_width_flags;
> /* Using for ISI_CFG1 */
> u32 frate;
> + /* Using for ISI_MCK, provided by Programmable clock */
> + u32 isi_mck_hz;
> };
>
> #endif /* __ATMEL_ISI_H__ */
> --
> 1.6.3.3
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
prev parent reply other threads:[~2011-09-30 9:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-22 4:11 Josh Wu
2011-09-22 4:11 ` [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board Josh Wu
2011-09-22 7:35 ` Guennadi Liakhovetski
2011-09-24 5:26 ` Jean-Christophe PLAGNIOL-VILLARD
2011-09-26 9:22 ` Nicolas Ferre
2011-09-26 9:32 ` Guennadi Liakhovetski
2011-09-26 10:57 ` Wu, Josh
2011-09-26 11:21 ` Guennadi Liakhovetski
2011-09-30 9:05 ` Guennadi Liakhovetski
2011-09-30 9:14 ` Guennadi Liakhovetski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.1109301105480.1888@axis700.grange \
--to=g.liakhovetski@gmx.de \
--cc=josh.wu@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®