From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
To: Denis Efremov <yefremov.denis@gmail.com>
Cc: Kurt Garloff <garloff@suse.de>,
"James E.J. Bottomley" <JBottomley@parallels.com>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] tmscsim: spin_unlock_irq in interrupt handler fix
Date: Sat, 4 Aug 2012 01:23:30 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.64.1208040120210.5170@axis700.grange> (raw)
In-Reply-To: <1343735613-28392-1-git-send-email-yefremov.denis@gmail.com>
On Tue, 31 Jul 2012, Denis Efremov wrote:
> The replacement of spin_lock_irq/spin_unlock_irq pairs which
> can be called from interrupt handler by irqsave/irqrestore
> versions.
>
> Found by Linux Driver Verification project (linuxtesting.org).
>
> Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Note: I didn't test this. I still have a dc390 card in my PC, so, I could
test it, but I haven't yet got time for this and I'll be away the next
week. The patch looks correct and safe. If it does break anything, well,
we'll get to know about that sooner or later...
Thanks
Guennadi
> ---
> drivers/scsi/tmscsim.c | 12 ++++++------
> drivers/scsi/tmscsim.h | 1 +
> 2 files changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
> index a1baccc..e9b7148 100644
> --- a/drivers/scsi/tmscsim.c
> +++ b/drivers/scsi/tmscsim.c
> @@ -665,7 +665,7 @@ DC390_Interrupt(void *dev_id)
> //dstatus = DC390_read8 (DMA_Status);
> //DC390_write32 (DMA_ScsiBusCtrl, EN_INT_ON_PCI_ABORT);
>
> - spin_lock_irq(pACB->pScsiHost->host_lock);
> + spin_lock_irqsave(pACB->pScsiHost->host_lock, pACB->hlock_flags);
>
> istate = DC390_read8 (Intern_State);
> istatus = DC390_read8 (INT_Status); /* This clears Scsi_Status, Intern_State and INT_Status ! */
> @@ -736,7 +736,7 @@ DC390_Interrupt(void *dev_id)
> }
>
> unlock:
> - spin_unlock_irq(pACB->pScsiHost->host_lock);
> + spin_unlock_irqrestore(pACB->pScsiHost->host_lock, pACB->hlock_flags);
> return IRQ_HANDLED;
> }
>
> @@ -771,9 +771,9 @@ dc390_DataOut_0(struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
> /* Function called from the ISR with the host_lock held and interrupts disabled */
> if (pSRB->SGToBeXferLen)
> while (time_before(jiffies, timeout) && !((dstate = DC390_read8 (DMA_Status)) & DMA_XFER_DONE)) {
> - spin_unlock_irq(pACB->pScsiHost->host_lock);
> + spin_unlock_irqrestore(pACB->pScsiHost->host_lock, pACB->hlock_flags);
> udelay(50);
> - spin_lock_irq(pACB->pScsiHost->host_lock);
> + spin_lock_irqsave(pACB->pScsiHost->host_lock, pACB->hlock_flags);
> }
> if (!time_before(jiffies, timeout))
> printk (KERN_CRIT "DC390: Deadlock in DataOut_0: DMA aborted unfinished: %06x bytes remain!!\n",
> @@ -830,9 +830,9 @@ dc390_DataIn_0(struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
> /* Function called from the ISR with the host_lock held and interrupts disabled */
> if (pSRB->SGToBeXferLen)
> while (time_before(jiffies, timeout) && !((dstate = DC390_read8 (DMA_Status)) & DMA_XFER_DONE)) {
> - spin_unlock_irq(pACB->pScsiHost->host_lock);
> + spin_unlock_irqrestore(pACB->pScsiHost->host_lock, pACB->hlock_flags);
> udelay(50);
> - spin_lock_irq(pACB->pScsiHost->host_lock);
> + spin_lock_irqsave(pACB->pScsiHost->host_lock, pACB->hlock_flags);
> }
> if (!time_before(jiffies, timeout)) {
> printk (KERN_CRIT "DC390: Deadlock in DataIn_0: DMA aborted unfinished: %06x bytes remain!!\n",
> diff --git a/drivers/scsi/tmscsim.h b/drivers/scsi/tmscsim.h
> index 77adc54..3f9ea2b 100644
> --- a/drivers/scsi/tmscsim.h
> +++ b/drivers/scsi/tmscsim.h
> @@ -107,6 +107,7 @@ u8 SyncOffset; /*;for reg. and nego.(low nibble) */
> struct dc390_acb
> {
> struct Scsi_Host *pScsiHost;
> +unsigned long hlock_flags;
> u16 IOPortBase;
> u8 IRQLevel;
> u8 status;
> --
> 1.7.7
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
prev parent reply other threads:[~2012-08-03 23:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-21 6:48 [PATCH] " Denis Efremov
2012-07-31 8:21 ` Guennadi Liakhovetski
2012-07-31 11:53 ` [PATCH v2] " Denis Efremov
2012-08-03 23:23 ` Guennadi Liakhovetski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.1208040120210.5170@axis700.grange \
--to=g.liakhovetski@gmx.de \
--cc=JBottomley@parallels.com \
--cc=garloff@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=yefremov.denis@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®