From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
To: Axel Lin <axel.lin@ingics.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] regulator: as3711: Use a static of_regulator_match table for of_regulator_match
Date: Wed, 17 Apr 2013 10:06:45 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.64.1304171005310.12878@axis700.grange> (raw)
In-Reply-To: <1366185682.26712.1.camel@phoenix>
On Wed, 17 Apr 2013, Axel Lin wrote:
> The same table can be used for multiple instance of pdev, so we don't need to
> allocate memory for of_regulator_match table per pdev.
>
> match->driver_data points to the corresponding entry of as3711_reg_info,
> however it is not used in current code, thus this patch does not set
> driver_data in the of_regulator_match table.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Thanks
Guennadi
> ---
> drivers/regulator/as3711-regulator.c | 43 ++++++++++++++--------------------
> 1 file changed, 18 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c
> index 0539b3e..3da6bd6 100644
> --- a/drivers/regulator/as3711-regulator.c
> +++ b/drivers/regulator/as3711-regulator.c
> @@ -278,19 +278,20 @@ static struct as3711_regulator_info as3711_reg_info[] = {
>
> #define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info)
>
> -static const char *as3711_regulator_of_names[AS3711_REGULATOR_NUM] = {
> - [AS3711_REGULATOR_SD_1] = "sd1",
> - [AS3711_REGULATOR_SD_2] = "sd2",
> - [AS3711_REGULATOR_SD_3] = "sd3",
> - [AS3711_REGULATOR_SD_4] = "sd4",
> - [AS3711_REGULATOR_LDO_1] = "ldo1",
> - [AS3711_REGULATOR_LDO_2] = "ldo2",
> - [AS3711_REGULATOR_LDO_3] = "ldo3",
> - [AS3711_REGULATOR_LDO_4] = "ldo4",
> - [AS3711_REGULATOR_LDO_5] = "ldo5",
> - [AS3711_REGULATOR_LDO_6] = "ldo6",
> - [AS3711_REGULATOR_LDO_7] = "ldo7",
> - [AS3711_REGULATOR_LDO_8] = "ldo8",
> +static struct of_regulator_match
> +as3711_regulator_matches[AS3711_REGULATOR_NUM] = {
> + [AS3711_REGULATOR_SD_1] = { .name = "sd1" },
> + [AS3711_REGULATOR_SD_2] = { .name = "sd2" },
> + [AS3711_REGULATOR_SD_3] = { .name = "sd3" },
> + [AS3711_REGULATOR_SD_4] = { .name = "sd4" },
> + [AS3711_REGULATOR_LDO_1] = { .name = "ldo1" },
> + [AS3711_REGULATOR_LDO_2] = { .name = "ldo2" },
> + [AS3711_REGULATOR_LDO_3] = { .name = "ldo3" },
> + [AS3711_REGULATOR_LDO_4] = { .name = "ldo4" },
> + [AS3711_REGULATOR_LDO_5] = { .name = "ldo5" },
> + [AS3711_REGULATOR_LDO_6] = { .name = "ldo6" },
> + [AS3711_REGULATOR_LDO_7] = { .name = "ldo7" },
> + [AS3711_REGULATOR_LDO_8] = { .name = "ldo8" },
> };
>
> static int as3711_regulator_parse_dt(struct device *dev,
> @@ -299,7 +300,7 @@ static int as3711_regulator_parse_dt(struct device *dev,
> struct as3711_regulator_pdata *pdata = dev_get_platdata(dev);
> struct device_node *regulators =
> of_find_node_by_name(dev->parent->of_node, "regulators");
> - struct of_regulator_match *matches, *match;
> + struct of_regulator_match *match;
> int ret, i;
>
> if (!regulators) {
> @@ -307,23 +308,15 @@ static int as3711_regulator_parse_dt(struct device *dev,
> return -ENODEV;
> }
>
> - matches = devm_kzalloc(dev, sizeof(*matches) * count, GFP_KERNEL);
> - if (!matches)
> - return -ENOMEM;
> -
> - for (i = 0, match = matches; i < count; i++, match++) {
> - match->name = as3711_regulator_of_names[i];
> - match->driver_data = as3711_reg_info + i;
> - }
> -
> - ret = of_regulator_match(dev->parent, regulators, matches, count);
> + ret = of_regulator_match(dev->parent, regulators,
> + as3711_regulator_matches, count);
> of_node_put(regulators);
> if (ret < 0) {
> dev_err(dev, "Error parsing regulator init data: %d\n", ret);
> return ret;
> }
>
> - for (i = 0, match = matches; i < count; i++, match++)
> + for (i = 0, match = as3711_regulator_matches; i < count; i++, match++)
> if (match->of_node) {
> pdata->init_data[i] = match->init_data;
> of_node[i] = match->of_node;
> --
> 1.7.10.4
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
next prev parent reply other threads:[~2013-04-17 8:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-17 8:01 Axel Lin
2013-04-17 8:06 ` Guennadi Liakhovetski [this message]
2013-04-17 13:41 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.1304171005310.12878@axis700.grange \
--to=g.liakhovetski@gmx.de \
--cc=axel.lin@ingics.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®