From: Meelis Roos <mroos@linux.ee>
To: Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: Disabling IRQ #11 - uhci || e100 || r128-dri problem
Date: Thu, 2 Jun 2005 19:15:31 +0300 (EEST) [thread overview]
Message-ID: <Pine.SOC.4.61.0506021906200.11783@math.ut.ee> (raw)
In recent 2.6.12 prereleases a bug has appeared. Whenever I log out of
KDE, IRQ 11 is disabled on X server restart (kdm restarts it). It always
results with the dmesg below and sometimes the new X loses keyboard
input (ps2 keyboard, usb mouse). USB mouse works well. X works (sans
keyboard sometimes). Network is dead.
irq 11: nobody cared!
[<c0136144>] __report_bad_irq+0x24/0x90
[<c0136241>] note_interrupt+0x61/0x90
[<c0135c1b>] __do_IRQ+0x13b/0x150
[<c0105607>] do_IRQ+0x47/0x70
=======================
[<c0103b2a>] common_interrupt+0x1a/0x20
[<c011dfce>] __do_softirq+0x2e/0x80
[<c0105711>] do_softirq+0x41/0x50
=======================
[<c011e0e5>] irq_exit+0x35/0x40
[<c010560e>] do_IRQ+0x4e/0x70
[<c0103b2a>] common_interrupt+0x1a/0x20
handlers:
[<e09622b0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[<c02aabb0>] (e100_intr+0x0/0x150)
Disabling IRQ #11
Celeron 900, Intel ICH2 chipset with integrated UHCI and onboard e100
NIC, running Debian unstable with XFree 4.3. 2.6.12-rc2 + XFree of that
time was OK, didn't try rc3 and rc4, rc5 probably also not tested but
rc5+git snapshots are the broken ones (together with current XFree). ATI
rage128 graphics with DRI enabled; I get the following dmesg lines on
X server start and at least the agpgart lines on each X server restart
too. I have seen this bug some time earlier too, probably in 2.6.11
timeframe, or in early 2.6.12 timeframe.
[drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 RF/SG AGP
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 2x mode
/proc/interrupts during normal work:
CPU0
0: 13006046 XT-PIC timer
1: 26607 XT-PIC i8042
2: 0 XT-PIC cascade
7: 1 XT-PIC parport0
8: 4 XT-PIC rtc
9: 1 XT-PIC acpi, Intel 82801BA-ICH2
10: 336628 XT-PIC uhci_hcd:usb2
11: 1161748 XT-PIC uhci_hcd:usb1, eth0, r128@PCI:2:0:0
14: 48258 XT-PIC ide0
15: 194377 XT-PIC ide1
NMI: 2680
LOC: 13007697
ERR: 0
MIS: 0
--
Meelis Roos (mroos@linux.ee)
next reply other threads:[~2005-06-02 16:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-02 16:15 Meelis Roos [this message]
2005-06-04 5:31 ` Dave Airlie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.SOC.4.61.0506021906200.11783@math.ut.ee \
--to=mroos@linux.ee \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®