From: Meelis Roos <mroos@linux.ee>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: libATA PATA status report, new patch
Date: Tue, 7 Feb 2006 19:50:20 +0200 (EET) [thread overview]
Message-ID: <Pine.SOC.4.61.0602071947030.15961@math.ut.ee> (raw)
In-Reply-To: <1139324653.18391.41.camel@localhost.localdomain>
> I've put up a -ide2 patch at
>
> http://zeniv.linux.org.uk/~alan/IDE
Tried it on a Intel 815 mainboard with ICH2, 1 IDE disk and 1 Sony CDROM
that had problems before (DMA timeout, PIO only, since about 2.4.21).
Got the following panic. First it paused several seconds after
scsi1 : ata_piix
and then gave the panic + double fault.
ata1: PATA max UDMA/66 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
ata1: dev 0 ATA-5, max UDMA/100, 40132503 sectors: LBA
ata1: dev 0 configured for UDMA/66
scsi0 : ata_piix
Vendor: ATA Model: QUANTUM FIREBALL Rev: A1Y.
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
ata2: command 0xa0 timeout, stat 0xd0 host_stat 0x24
ata2: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
SCSI device sda: 40132503 512-byte hdwr sectors (20548 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
int3: 0000 [#1]
CPU: 0
EIP: 0060:[<c0148711>] Not tainted VLI
EFLAGS: 00000282 (2.6.16-rc2-PATA)
EIP is at get_super+0x1/0x80
eax: c146d040 ebx: c146d040 ecx: dfe83db8 edx: 00000001
esi: 00000000 edi: 00000000 ebp: 00000000 esp: dfe83db4
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=dfe83000 task=dfe82a30)
Stack: <0>00000000 c01441e9 c146d040 00000000 c01ac931 c146d040 dfc97ec0 c016ff4e
c01ed05e dfcbf120 c146d040 dfc97ec0 c02b7153 dfe83e1c c146d040 dfc97ec0
00000000 00000000 c0149a31 c146d04c 00000000 dfe83ea0 c146d040 00000001
Call Trace:
[<c01441e9>] fsync_bdev+0x9/0x30
[<c01ac931>] invalidate_partition+0x21/0x40
[<c016ff4e>] rescan_partitions+0x2e/0x210
[<c01ed05e>] get_device+0xe/0x20
[<c02b7153>] sd_open+0x43/0x100
[<c0149a31>] do_open+0x201/0x280
[<c0149b53>] blkdev_get+0x53/0x60
[<c0170207>] register_disk+0xd7/0xf0
[<c01ac492>] add_disk+0x32/0x40
[<c01ac420>] exact_match+0x0/0x10
[<c01ac450>] exact_lock+0x0/0x10
[<c02b892f>] sd_probe+0x21f/0x300
[<c01ee6d0>] __driver_attach+0x0/0x60
[<c01ee608>] driver_probe_device+0x38/0xa0
[<c01ee72a>] __driver_attach+0x5a/0x60
[<c01edcf8>] bus_for_each_dev+0x38/0x60
[<c01ee4e1>] driver_attach+0x11/0x20
[<c01ee6d0>] __driver_attach+0x0/0x60
[<c01edfca>] bus_add_driver+0x5a/0x100
[<c01eea10>] klist_devices_get+0x0/0x10
[<c0100311>] init+0x81/0x1e0
[<c0100290>] init+0x0/0x1e0
[<c0100bd5>] kernel_thread_helper+0x5/0x10
Code: 14 00 00 00 89 44 24 58 8b 44 24 2c 89 44 24 5c 8b 44 24 7c e8 01 d1 06 00 85 c0 74 c7 bb f2 ff ff ff eb c0 8d b6 00 00 00 00 56 <85> c0 53 89 c6 75 08 31 db 89 d8 5b 5e c3 90 8b 1d 90 6f 37 c0
<0>Kernel panic - not syncing: Attempted to kill init!
double fault, gdt at c036f000 [255 bytes]
double fault, tss at c0370000
eip = c011270a, esp = dfe83ce0
eax = 00000000, ebx = 00000000, ecx = c043d280, edx = 00000000
esi = dfe82a30, edi = 00000000
--
Meelis Roos (mroos@linux.ee)
next prev parent reply other threads:[~2006-02-07 17:50 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-06 16:46 Alan Cox
2006-02-06 20:04 ` Meelis Roos
2006-02-06 22:53 ` Alan Cox
2006-02-07 8:43 ` Meelis Roos
2006-02-07 11:05 ` Alan Cox
2006-02-07 11:10 ` Meelis Roos
2006-02-07 11:29 ` Ed Sweetman
2006-02-07 11:32 ` Meelis Roos
2006-02-07 11:38 ` Alan Cox
2006-02-07 15:04 ` Alan Cox
2006-02-07 17:02 ` Meelis Roos
2006-02-07 19:38 ` Duplicated SCSI messages (Was: Re: libATA PATA status report, new patch) Tomasz Kłoczko
2006-02-07 17:30 ` libATA PATA status report, new patch Meelis Roos
2006-02-07 17:50 ` Meelis Roos [this message]
2006-02-08 13:31 ` Alan Cox
2006-02-08 7:42 ` Meelis Roos
2006-02-08 18:28 ` Meelis Roos
2006-02-09 15:31 ` Alan Cox
2006-02-09 21:12 ` Meelis Roos
2006-02-10 12:01 ` Erik Mouw
2006-02-10 15:46 ` Alan Cox
2006-02-12 18:07 ` Kyle Moffett
2006-07-07 16:29 ` Wakko Warner
2006-07-07 16:52 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.SOC.4.61.0602071947030.15961@math.ut.ee \
--to=mroos@linux.ee \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®