From: Meelis Roos <mroos@linux.ee>
To: Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: ppc modprost warnings in 2.6.22-rc1
Date: Mon, 14 May 2007 17:20:20 +0300 (EEST) [thread overview]
Message-ID: <Pine.SOC.4.64.0705141717110.23895@math> (raw)
Trying to compile 2.6.22-rc1 for ppc (prep) arch. While section
mismatches are an old thing, what are these COMMON symbols?
MODPOST vmlinux
WARNING: "fee_restarts" [arch/ppc/kernel/built-in] is COMMON symbol
WARNING: "ee_restarts" [arch/ppc/kernel/built-in] is COMMON symbol
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x18) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x3c) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x114) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x138) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x15c) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x180) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x1a4) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x1c8) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x1ec) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x210) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x234) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x258) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x27c) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x2a0) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x2c4) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x2e8) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x30c) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x330) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x354) and 'Mesquite_pci_IRQ_map'
WARNING: arch/ppc/platforms/built-in.o - Section mismatch: reference to .init.text:Powerplus_Map_Non0 from .data between 'mot_info' (at offset 0x378) and 'Mesquite_pci_IRQ_map'
WARNING: "primary_pteg_full" [arch/ppc/mm/built-in] is COMMON symbol
WARNING: "next_slot" [arch/ppc/mm/built-in] is COMMON symbol
WARNING: "htab_hash_searches" [arch/ppc/mm/built-in] is COMMON symbol
WARNING: arch/ppc/mm/built-in.o - Section mismatch: reference to .init.text:early_get_page from .text between 'pte_alloc_one_kernel' (at offset 0x1168) and 'hash_page'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x24208) and 'kmem_cache_shrink'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x24350) and 'kmem_cache_shrink'
WARNING: lib/built-in: '__div64_32' exported twice. Previous export was in arch/ppc/kernel/built-in.ko
--
Meelis Roos (mroos@linux.ee)
next reply other threads:[~2007-05-14 14:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-14 14:20 Meelis Roos [this message]
2007-05-15 20:45 ` Sam Ravnborg
2007-05-30 13:55 ` Meelis Roos
2007-05-30 14:58 ` Satyam Sharma
2007-05-30 16:14 ` [PATCH] [ppc] fix mot_info section Meelis Roos
2007-05-30 17:08 ` Sam Ravnborg
2007-05-30 17:23 ` Meelis Roos
2007-05-30 16:15 ` ppc modprost warnings in 2.6.22-rc1 Meelis Roos
2007-05-30 15:14 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.SOC.4.64.0705141717110.23895@math \
--to=mroos@linux.ee \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®