Re: [EXTERNAL] Re: Potential issue with smb word operations for tmp461 device in tmp401 driver

["Wilson, David T. (GSFC-5870)" <david.wilson@nasa.gov>]

On my target platform, I do not believe the i2c-tools are completely supported, so i2c-dump is unable to provide me a register dump for the connected tmp461. 

If you have any other suggested methods of achieving the i2c register dump, I could try those as well.

I see on a different email chain that you have already submitted a patch to resolve this tmp461 issue.

Thanks for looking into this issue!
David


From: Guenter Roeck <groeck7@gmail.com> on behalf of Guenter Roeck <linux@roeck-us.net>
Sent: Friday, October 15, 2021 6:27 PM
To: Wilson, David T. (GSFC-5870) <david.wilson@nasa.gov>
Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-hwmon@vger.kernel.org <linux-hwmon@vger.kernel.org>
Subject: [EXTERNAL] Re: Potential issue with smb word operations for tmp461 device in tmp401 driver 
 
Hi,

On Fri, Oct 15, 2021 at 05:43:54PM +0000, Wilson, David T. (GSFC-5870) wrote:
> Hi,
> 
> I am reporting what I believe is a potential issue in the tmp401 driver for the tmp461 device specifically. I am new to reporting issues, so I apologize in advance if I've provided insufficient information for an issue report.
> 
> The problem I'm encountering is that when I use the tmp401 linux driver to read temperature values from the tmp461, all of the read temperature values end with 996 (e.g. 33996, 38996, etc...).
> 
> Looking further into the tmp401 commit messages, I see that the driver was changed to use smb word operations instead of separate byte operations. Although the other supported devices (i.e. tmp432, etc...) are noted to support 16-bit read operations in their respective datasheets, I see no indications of 16-bit read support in the tmp461 datasheet, which is supported by my inquiry in the TI forums (https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fe2e.ti.com%2Fsupport%2Fsensors-group%2Fsensors%2Ff%2Fsensors-forum%2F1044935%2Ftmp461-linux-driver-support-and-16-bit-temperature-register-reads&amp;data=04%7C01%7Cdavid.wilson%40nasa.gov%7C1d874c8a8c8e471a2c1a08d9902af71b%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637699336485905564%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=vwnJOlMAKMn752Vw%2F11KA96%2BPwnen22GvuT6fcitMt8%3D&amp;reserved=0).
> 
> Reverting the driver to the commit before the smb word change, I am then able to read temperature values that do not end only with 996. As a result, I believe that the tmp461 support may be partially broken by the switch to smb word operations.
> 

Thanks a lot for the report. Can you send me a register dump for the tmp461 ?

Thanks,
Guenter