[PATCH v2 4/4] regulator: axp20x: Set DCDC frequency only when property exists

[Shengyu Qu <wiagn233@outlook.com>]

Current axp20x regulator driver would always set DCDC frequency even if
there is no x-powers,dcdc-freq in device tree data. Causing meaningless
warning info output on variants that do not support DCDC frequency
modification. So only try to set DCDC frequency when there is frequency
property.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
---
 drivers/regulator/axp20x-regulator.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index a4564d3590aa..68a22e3e6e0e 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -1247,10 +1247,10 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
 	if (!regulators) {
 		dev_warn(&pdev->dev, "regulators node not found\n");
 	} else {
-		of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
-		ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
+		if (of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq) != -EINVAL) {
+			ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
+			if (ret < 0)
+				dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
 		}
 		of_node_put(regulators);
 	}
-- 
2.25.1