From: Shengyu Qu <wiagn233@outlook.com>
To: kernel@esmil.dk, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu, jszhang@kernel.org,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Shengyu Qu <wiagn233@outlook.com>, stable@vger.kernel.org
Subject: [PATCH] riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boards
Date: Tue, 11 Jun 2024 22:56:41 +0800 [thread overview]
Message-ID: <TY3P286MB2611936BD43C24D34B442E6D98C72@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM> (raw)
Currently, for JH7110 boards with EMMC slot, vqmmc voltage for EMMC is
fixed to 1.8V, while the spec needs it to be 3.3V on low speed mode and
should support switching to 1.8V when using higher speed mode. Since
there are no other peripherals using the same voltage source of EMMC's
vqmmc(ALDO4) on every board currently supported by mainline kernel,
regulator-max-microvolt of ALDO4 should be set to 3.3V.
Cc: stable@vger.kernel.org
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Fixes: ac9a37e2d6b6 ("riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards")
---
arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 37b4c294ffcc..c7a549ec7452 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -244,7 +244,7 @@ emmc_vdd: aldo4 {
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "emmc_vdd";
};
};
--
2.34.1
next reply other threads:[~2024-06-11 14:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-11 14:56 Shengyu Qu [this message]
2024-06-11 16:23 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=TY3P286MB2611936BD43C24D34B442E6D98C72@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM \
--to=wiagn233@outlook.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jszhang@kernel.org \
--cc=kernel@esmil.dk \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®